2009 FIAT PANDA Code

REFUELLING
Petrol engines: only refuel with unleaded petrol with oc-
tane rating (RON) not less than 95 in compliance with
the European Standard EN 228.
Diesel engines: only refuel with diesel fuel for motor
vehicles in compliance with the European Standard
EN 590. The use of other products or mixtures may
damage the engine beyond repair and consequently
invalidate the warranty, due to the damage caused.
STARTING THE ENGINE
Petrol engines: make sure that the handbrake is engaged;
set the gearshift lever to neutral; fully depress the clutch
pedal without pressing the accelerator, then turn the ig-
nition key to AVV and release it as soon as the engine has
started.
Diesel engines: turn the ignition key to MAR and wait for
the warning lights Y(or symbol on the display) and m
to go off. Then, turn the ignition key to AVV and release
it as soon as the engine has started.
PARKING ON FLAMMABLE MATERIAL
The catalytic converter develops high temperatures
during operation. Do not park the car on grass, dry
leaves, pine needles or other flammable material: fire
hazard.
RESPECTING THE ENVIRONMENT
The car is fitted with a system that allows continuous
diagnosis of the components correlated with emissions
to ensure better respect for the environment.K
ELECTRICAL ACCESSORIES
If, after buying the car, you decide to add electrical ac-
cessories (with the risk of gradually draining the bat-
tery), contact a Fiat Dealership. They can calculate the
overall electrical requirement and check that the ve-
hicle electric system can support the required load.
CODE card
Keep the card in a safe place, not in the car. Make sure
you have the electronic code written on the CODE
card with you at all times.
SCHEDULED SERVICING
Correct car servicing is essential for ensuring it stays in
tip-top condition and safeguards its safety features, its
environmental friendliness and low running costs for
a long time to come.
THE OWNER HANDBOOK CONTAINS…
... important information, tips and warnings for correct
use, driving safety and maintenance of your car over
time. Pay special attention to the symbols
"
(person-
al safety)
#
(environmental protection)
!
(the car’s
wellbeing).
READ THIS CAREFULLY!

001-030 PANDA EN 7-10-2009 13:39 Pagina 2

5KNOW YOUR
VEHICLESAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Z0003m
fig. 3
THE FIAT CODE SYSTEMTo further protect your car from theft, it has been fitted
with an engine immobilising system. It is automatically acti-
vated when the ignition key is removed.
An electronic device, in fact, is fitted in each ignition key grip.
The device transmits a radio-frequency signal when the en-
gine is started through a special aerial built into the igni-
tion switch. The modulated signal, which changes each time
the engine is started, is the “password”, by means of which
the control unit recognises the key and enables to start
the engine.
OPERATION
Each time the car is started by turning the ignition key to
MAR, the Fiat CODE system control unit sends an ac-
knowledgement code to the engine management control
unit to deactivate the inhibitor.
The acknowledgement code is sent only if the Fiat CODE
system control unit has recognised the code transmitted
from the key.
Each time the ignition key is turned to STOP, the Fiat
CODE system deactivates the functions of the engine man-
agement control unit.
If the code has not been recognised correctly, the instru-
ment panel warning light
Y
turns on.
In this case, turn the key to STOP and then back to MAR;
if the lock continues, possibly try with the other keys pro-
vided with the car. If you still cannot start the engine, per-
form the emergency start procedure (see chapter “In an
emergency”) and then contact the Fiat Dealership.
SYMBOLSSpecial coloured labels have been attached near or actu-
ally on some of the components of your car. These labels
bear symbols that remind you of the precautions to be tak-
en as regards that particular component.
The plate summarising the symbols used can be found un-
der the bonnet, fig. 3.
001-030 PANDA EN 7-10-2009 13:39 Pagina 5

6
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Z0679m
fig. 4
THE KEYSCODE CARD fig. 4
The car is delivered with two copies of the ignition key
and with the CODE card which bears the following:
A the electronic code to be used for emergency starting
(see “Emergency starting” in chapter “Correct use of
the car”).
B the mechanical key code to be given to the Fiat Deal-
ership when ordering duplicate keys.
Make sure you have the electronic code A with you at all
times in the event you have to perform an emergency
starting.
IMPORTANT In order to ensure complete efficiency of
the electronic devices inside the keys, they should never
be exposed to direct sunlight. IMPORTANT Each key has its own code which must be
stored by the system electronic control unit. Contact the
Fiat Dealership to have new keys (up to eight) stored with
the code.
Warning light
Y
coming on when driving
❒
If the warning light
Y
turns on, this means that the
system is running a self-diagnosis (for example for a volt-
age drop). At the first stop, turn the ignition key to
STOP and then back to MAR: if no failure is detected,
the warning light
Y
will not come on.
❒
If the warning light
Y
stays on, repeat the above pro-
cedure leaving the key at STOP for over 30 seconds.
Should the fault persist, contact a Fiat Dealership.
❒
If the warning light
Y
stays on, the code has not been
recognised. In this case, turn the key to STOP again and
then back to MAR; if the lock continues, possibly try
with the other keys provided with the car. If you still
cannot start the engine, perform the emergency start
procedure (see chapter “In an emergency”) and then
contact the Fiat Dealership.
The electronic components inside the key
may be damaged if the key is submitted to
strong shocks.
001-030 PANDA EN 7-10-2009 13:39 Pagina 6

7KNOW YOUR
VEHICLESAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Z0680m
fig. 5
F0Z0681m
fig. 6
KEY WITH REMOTE CONTROL fig. 6 - fig. 7
(for versions/markets, where provided)
The metal insert A operates:❒
the ignition switch;
❒
the door and the tailgate locks;
❒
the switch to deactivate the passenger’s air bag
(for versions/markets, where provided).
Press button B to open/close the metal insert. KEY WITHOUT REMOTE CONTROL fig. 5
The metal insert A operates:
❒
the ignition switch;
❒
the door and the tailgate locks;
❒
the switch to deactivate the passenger’s air bag
(for versions/markets, where provided).
All the keys and the CODE card must be
handed over to the new owner when selling
the car.
Button B should only be pressed when the
key is away from the body, in particular
from the eyes and from objects that can be spoilt
(e.g. clothes). Never leave the key unattended and
make sure it can never be touched by others,
especially children, who may inadvertently press
the button.
WARNING
001-030 PANDA EN 7-10-2009 13:39 Pagina 7

8
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Z0682m
fig. 7
When a speed of over 20 km/h is reached, the doors will
be automatically locked if this specific function was set (on-
ly on versions with multifunction reconfigurable display).
Opening the tailgate by the remote control
Press and keep button
R
pressed for over one second
to open (unlock) the tailgate by remote control.
The tailgate opening is indicated by double flashing of
direction indicators.
IMPORTANT If the remote control does not work prop-
erly, it is still possible to carry out the above mentioned
operations by using the metal insert of the key.
REQUEST FOR ADDITIONAL
REMOTE
CONTROLS
The system can recognise up to 8 keys with incorporat-
ed remote control. Should a new key with remote con-
trol be necessary, contact a Fiat Dealership, taking with
you the CODE card, a personal identity document and the
car’s ownership documents. Unlocking the doors and the tailgate
Briefly press button
Ë: for unlocking of doors and tail-
gate, timed switching-on of internal lights and double flash-
ing of direction indicators (for versions/markets where
provided).
Doors will be unlocked automatically if the fuel inertia
cut-off switch comes into operation.
Locking the doors and the tailgate
Briefly press button Á: for remote locking of doors and
tailgate, switching-off of the internal ceiling lights and sin-
gle flashing of direction indicators (for versions/markets
where provided).
If one of the doors remains open, all doors will be closed
and immediately re-opened and the command is reject-
ed, signalled by the direction indicators flashing; in this case
check that all of the doors are properly locked and repeat
the locking operation.
001-030 PANDA EN 7-10-2009 13:39 Pagina 8

53KNOW YOUR
VEHICLESAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Z0230m
fig. 52
F0Z0020m
fig. 53
CONTROLSDUALDRIVE ELECTRIC POWER STEERING
SYSTEM fig. 53
(for versions/markets where provided)
Press the button A to turn the “CITY” function on (see
paragraph “Electric power steering”). When this function
is on, the wording CITY on the instrument panel will turn
on. Press the button again to turn the function off.
HAZARD LIGHTS fig. 53
They are turned on by pressing the button B, regardless
of the position of the ignition key.
When the device is on, the switch is flashing and warning
lights
Î
and
¥
on the cluster come on.
Press button B again to turn off.
The use of hazard lights is governed by the Highway Code
of the country you are in. Keep to the rules. BOOT LIGHT fig. 52
For versions fitted with boot light, the light comes on
automatically when opening the tailgate and it will go off
when closing.
031-064 PANDA EN 7-10-2009 13:43 Pagina 53

HEADLIGHTSHEADLIGHT BEAM AIMING
The correct aiming of the headlights is important for the
comfort and safety of not only the driver but all other road
users. This is also covered by a specific rule of the high-
way code. The headlights must be correctly aimed to get
the best visibility conditions for all drivers while travel-
ling with headlights on. Contact a Fiat Dealership to have
the headlights properly adjusted. Check headlight beam
aiming every time the load or its distribution change.
SLANT COMPENSATION fig. 83
The car is fitted with electric adjustment of the beams, op-
erating with ignition key at MAR and dipped headlights on.
When the car is loaded, it slopes backwards. This means
the headlight beam rises.
In this case, repeat beams aiming by buttons + and −.The display provides a visual indication of the positions
during adjustment.
Correct positions depending on the load
Position 0 – one or two passengers on front seats.
Position 1 – four passengers.
Position 2 – four passengers + load in the boot.
Position 3 – driver + maximum permitted load in the boot.
fig. 84
F0Z0076m
fig. 83
F0Z0141m
72
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
065-090 PANDA EN 7-10-2009 13:45 Pagina 72

FRONT FOG LIGHT AIMING fig. 84
(for versions/markets where provided)
Contact a Fiat Dealership to have the fog lights properly
adjusted.ADJUSTING THE HEADLIGHTS WHEN
ABROAD fig. 85
Dipped headlights are adjusted to drive in the country
where the vehicle was originally purchased. When trav-
elling in countries with opposite driving direction, to avoid
blinding the drivers on the other side of the road, you need
to cover the headlight areas depending on the Highway
code of the country you are travelling in.
This is done using non-transparent sticker tape on
the headlights as shown in the figure. The figure show how
to change from left-hand drive to right-hand drive.
fig. 85
F0Z0691m
73KNOW YOUR
VEHICLESAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
065-090 PANDA EN 7-10-2009 13:45 Pagina 73