2009 FIAT PANDA radio

2
HANDS-FREE KIT WITH VOICE RECOGNITION
AND Bluetooth
®TECHNOLOGY
OVERVIEW
Bluetooth
®wireless technology enables
wireless connection between your mobile
phone and the hands-free kit installed on
your car.
Communication is based on the transmis-
sion of radio shortwaves, that exchanges
data and voice at a speed of approx. 1
Mb/sec. within a range of about 10 metres.
The radio frequency used by Bluetooth
®
wireless technology is not subject to re-
strictions or limitations and is free of
charge.
The hands-free kit with voice recognition
enables to make and receive calls safely
and securely under whatever driving con-
dition without removing your hands from
the steering wheel as required by current
regulation. The system installed on your car offers
you the following functions:
❒automatic mute of the car radio dur-
ing calls;
❒hands-free conversation;
❒conversation diffusion through car
speakers;
❒pairing of up to three mobile phones
with activation of one mobile phone at
a time (for connection priority see next
pages);
❒voice recognition (according to mobile
phone type);
❒automatic storage of your telephone di-
rectory (only available with Ericsson/
SonyEricsson phones);
❒use of different telephone numbers for
each contact (e.g. home, work, cellu-
lar according to mobile phone type);
❒starting/answering/refusing calls with
voice command (according to mobile
phone type);
❒volume adjustment through phone
menu and through sound system vol-
ume controls (see Sound System chap-
ter);
❒“confidential” conversation mode, to
switch from hands-free mode to phone
mode (according to mobile phone
type);
❒echo and background noise reduction.
603_97_431 Panda Bluet GB:MY 09 5-10-2009 10:09 Pagina 2

3
HANDS-FREE KIT WITH VOICE RECOGNITION
AND Bluetooth
®TECHNOLOGY
SYSTEM COMPONENTS
The hands-free kit consists of the follow-
ing main components:
❒electronic control box
❒microphone
❒steering wheel controls
The electronic control box, located in the
dashboard, houses the Bluetooth
®wire-
less technology radio transmitter, the sig-
nal processing microprocessor and the
operating software.
The high-grade microphone housed aside
the front roof lamp has been designed to
guarantee optimum communication under
whatever condition.
Steering wheel controls feature two keys,
£and Ô(see figure on next page), en-
abling to activate all system functions.Press button
£:
❒to activate voice recognition;
❒to answer a call or dual call;
❒to redial the last number called;
❒to activate the “confidential” mode.
Press button
Ô:
❒to end the communication;
❒to refuse a call.
Press buttons
£and Ôsimultaneously
for at least 2 seconds for clearing the sys-
tem memory.IMPORTANT Clearing the memory will
disconnect all stored phones, will clear any
phone number stored in the system mem-
ory and will require to repeat the pairing
phase.
603_97_431 Panda Bluet GB:MY 09 5-10-2009 10:09 Pagina 3

4
HANDS-FREE KIT WITH VOICE RECOGNITION
AND Bluetooth
®TECHNOLOGY
STEERING WHEEL CONTROLS
CE
F0G0716m
Button
£
+
–
Ô
˜
÷
FUNCTION
To activate voice recognition
To answer a call or dual call
To adjust call volume
To turn up the volume (Radio or CD)
To adjust call volume
To turn down the volume (Radio or CD)
To end the communication
To refuse a call
Radio: to recall preset stations (from 1 to 6)
Tape player: to search next track (MSS function)
CD player: to search next track
CD Changer: to select next track
Radio: to recall preset stations (from 6 to 1)
Tape player: to search previous track (MSS function)
CD player: to search previous track
CD Changer: to select previous trackMode
Press button
Press button
Press button
Press button
Press button
Press button
603_97_431 Panda Bluet GB:MY 09 5-10-2009 10:09 Pagina 4

6
HANDS-FREE KIT WITH VOICE RECOGNITION
AND Bluetooth
®TECHNOLOGY
IMPORTANT When the use of the hands-
free kit with Bluetooth®wireless tech-
nology is not desired, message “Accoppi-
are l’apparecchio” (pair kit) can be pre-
vented from being repeated by setting car
radio channel PHONE minimum volume
(see Sound System chapter). Turn the
sound system on to hear message “Ac-
coppiare l’apparecchio” (pair kit).
During the pairing procedure the
message asking for the passcode will
be displayed; enter “1234” as pass-
code and then confirm it.
Once this done, connection between your
phone and your hands-free kit will take
place automatically as soon as the two de-
vices are less than a few meters apart. A
“beep” will be heard, indicating that con-
nection is established. Here follows an ex-
ample of first pairing procedure for the
most common mobile phones.
IMPORTANT The system operates only
when the ignition key is turned to MAR.
Pairing procedure shall be performed on-
ly the first time you pair your phone and
your hands-free kit. Should instruction
“Accoppiare l’apparecchio” (pair kit) not
be heard at first pairing, reset the system
by pressing simultaneously buttons
£and
Ôfor 2 seconds at least.PAIRING WITH OTHER
ADDITIONAL PHONES
If you decide to pair another phone, you
just have to follow the ordinary pairing
procedure described in the previous para-
graph, in this way you can connect up to
3 mobile phones. To pair other phones
you shall reset the system (any phone
number stored will be cleared).
CLEARING THE MEMORY
Press the green
£and red Ôbuttons si-
multaneously for at least 2 seconds for
clearing the system memory.
IMPORTANT Clearing the memory will
disconnect all stored phones, will clear any
phone number stored in the system mem-
ory and will require to repeat the pairing
phase.PAIRING PRIORITY
If 2 mobile phones at least are paired, the
first phone paired (in chronological order)
will have highest priority. This means that
when getting into the car with system ac-
tive (key at MAR), this will be the first
phone to be searched and, if present, to
be connected. Should the priority phone
not be found, the system will then search
for the other phones.
COMMUNICATING
Find below a description of the main
communication procedures valid for
almost all mobile phones.
Making a call manually:
❒dial the number on the mobile phone
keypad;
❒press directly the phone button to start
the call;
❒the call will be switched automatically
to hands-free mode (on certain phone
models, e.g. SIEMENS S55, button
£must be pressed to shift the telephone
call to hands-free mode).
603_97_431 Panda Bluet GB:MY 09 5-10-2009 10:09 Pagina 6

9
HANDS-FREE KIT WITH VOICE RECOGNITION
AND Bluetooth
®TECHNOLOGY
Repeat the procedure for each name to
be voice tagged.
For proper recording of voice tags com-
ply with these recommendations:
❒make recording in quite place;
❒close the doors and windows;
❒turn off your engine, radio and ventila-
tion;
❒speak out clearly and naturally towards
the microphone.Keywords
The hands-free kit has two preset voice
prompts (“Telephone” and “Hang up”).
“Telephone” is used to call or answer a
call (function of button
£, whereas “Hang
up” is used to refuse or end a call (func-
tion of button
Ô).
You need to record keywords for use
with “Wordspotting” option, proceed as
follows:
❒from the “Connectivity” menu, select
“Accessories”;
❒select the system menu;
❒select “Voice recognition”;
❒select “Keywords”;
❒select the word to be recorded (“Tele-
phone” or “Hang up”);
❒you will hear the system prompt, then
you have to pronounce clearly the
name displayed towards the micro-
phone located in the front roof lamp;
❒the system will repeat the name and ask
you to repeat it for confirmation.Making a call using the
“Wordspotting” option:
❒pronounce the keyword “Telephone”;
❒wait for the beep;
❒pronounce the name you wish to call;
❒the system will repeat it for confirma-
tion and then will start the call;
❒if the name pronounced by the system
is not the one you desire, say “Hang
up” or press button
Ôand repeat the
procedure.
603_97_431 Panda Bluet GB:MY 09 5-10-2009 10:09 Pagina 9

14
HANDS-FREE KIT WITH VOICE RECOGNITION
AND Bluetooth
®TECHNOLOGY
SOLUTION
Check that the ignition key is turned to MAR
Switch off your telephone and then switch it back on again
(if the hands-free kit is not operating)
Switch off your telephone and then switch it back on again
Check that the connection of the Bluetooth
®wireless technology of your
telephone is enabled (refer to the manual of your phone, if necessary)
Repeat the connection phase
Make sure that you are speaking clearly and according to microphone
direction
Lower the volume on the mobile phone. Also lower the volume of car
radio channel PHONE, if necessary (see Sound System Supplement)
Adjust the volume on the mobile phone. Also check the volume of car
radio channel PHONE, if necessary (see Sound System Supplement)
Go back to the main menu and repeat the pairing procedure
Set user priority (refer to paragraph “Pairing priority”)
Check that the required name is voice tagged
Repeat the name clearly towards the microphone
Check that the “Avviso di chiamata”
(Call waiting) option on your phone is enabled
Check that these entries are present in the phone book and not only in the
SIM card memory
Check that Bluetooth
®wireless technology, “Voice recognition” and
“Wordspotting” options on your phone are enabled
TROUBLESHOOTING PROBLEM
PROBLEM
The system is not working
The system says that the Bluetooth
®
wireless technology is not detected
Your telephone does not detect the hands-free kit
Your telephone is not detected
The person you are calling complains of the bad sound
quality during communication
The person you are calling complains of an echo
during communication
You cannot hear the voice of the person you are calling
No connection after entering the passcode “1234”
Your telephone is detected too slowly when
switched on
When making a call with voice recognition the system
says that the name you desire is not voice tagged
Dual call failing
Certain phone book entries are not copied in the system memory
The system does not recognise voice prompts
IMPORTANT System checks and repairs, if required, shall only be performed by Fiat Dealership.
603_97_431 Panda Bluet GB:MY 09 5-10-2009 10:09 Pagina 14