4
FIAT PANDA ADVENTURE
OUTFIT
This version is available in the following
versions:
2-seater version
❒No rear seat;
❒fixed tubular wall separating the load
area from the passenger compartment;
❒load platform extended to the dividing
wall;
❒rear side windows (load compartment)
fixed and darkened and darkened rear
window;
❒spare wheel same size as wheels sup-
plied (space-saver spare wheel for ver-
sions/markets, where provided);
❒4 load-holding hooks.
4-seater version
❒Rear seat for only two seats with three
point seatbelts and reel;
❒fixed tubular wall separating the luggage
area from the passenger compartment
(for versions/markets, where provid-
ed);
❒spare wheel same size as wheels sup-
plied.
SEAT BELTS
In the four-seater versions, the rear seats
include two three-point seatbelts with
reel, as shown in fig. 2.
fig. 1F0G0244mfig. 2F0G0245m
LUGGAGE SHELF
(for versions/markets,
where provided)
To make use of the luggage compartment
easier, the shelf can be removed. To re-
move, release the two pins A-fig. 1(one
each side) from their respective positions,
pulling the shelf towards the outside.
603_97_569 PANDA ADV Euro5 GB 9-12-2009 8:06 Pagina 4
5
FIAT PANDA ADVENTURE
ABS SYSTEM
The ABS system with this version is sup-
plied as standard, and consists of:
❒EBD (Electronic Braking force Distrib-
ution), which distributes the braking ac-
tion between front and rear wheels;
❒MSR (Motor Schleppmomenten
Regelung - Regulation of engine braking
torque), which intervenes in the event
of a sudden change of gear whilst down-
shifting (preventing the wheels from
locking during deceleration when the
accelerator is released), restoring
torque to the engine, thereby avoiding
excessive drag of the driving wheels
which can lead to a loss of vehicle sta-
bility and control, particularly in poor
grip conditions.
REPLACING A WHEEL
General instructions
The vehicle is originally supplied with a
spare wheel of the same size as those fit-
ted (space-saver spare wheel for ver-
sions/markets, where provided).
Wheel changing and correct use of the jack
and spare wheel (space-saver spare wheel
for versions/markets, where provided) call
for some precautions reported in the Use
and Maintenance manual to which this sup-
plement is attached.To change a wheel proceed as follows:
❒stop the car in a position so that it is
not a danger for on-coming traffic and
where you can replace the wheel safe-
ly. The ground must be flat and com-
pact;
❒Turn the engine off and pull up the
handbrake.
❒Engage first gear or reverse;
603_97_569 PANDA ADV Euro5 GB 9-12-2009 8:06 Pagina 5
