6
FIAT PANDA ADVENTURE
❒take the tool bag fig. 3positioned un-
der the driver’s seat (4-seater version)
or between the dividing wall and pas-
senger seat fig. 4(2-seater version, ac-
cessible from the right rear door) and
take it next to the wheel to be changed;
❒loosen the fastening device B-fig. 5;
❒take the spare wheel (space-saver
spare wheel for versions/markets,
where provided) A;
❒turn the jack crank to open it partial-
ly;
❒position the jack close to the wheel to
be changed, at the sign Oreported on
the longeron fig. 6;
❒ensure that the groove Fof the jack is
well fitted onto the tab Gof the
longeron;
fig. 3F0G0607m
fig. 4F0G0278m
fig. 5F0G0608m
❒warn anybody nearby that the car is
about to be lifted. They must stay clear
and not touch the car until it is back
on the ground;
❒fit the handle H-fig. 6 into the jack de-
vice Iand lift the car until the wheel to
be changed is several centimetres off
the ground; Turn the crank, take care
that rotation takes place freely, with no
risk of grazing hands due to friction
with the ground. The moving parts of
the jack (screws and joints) can also
cause injury: do not touch them. If you
come into contact with lubricating
grease, clean yourself thoroughly;
❒remove the hub cab, fully unscrew the
bolts L-fig. 7 and remove the wheel;
fig. 7F0G0233m
fig. 6F0G0610m
603_97_569 PANDA ADV Euro5 GB 9-12-2009 8:06 Pagina 6
7
FIAT PANDA ADVENTURE
❒turn the jack handle to lower the car
and remove the jack;
❒fully tighten the bolts, passing alterna-
tively from a bolt to the opposite one,
following the order shown in fig. 9.
When you have finished
❒replace the partially open jack and
equipment used in the tool bag;
❒re-organise the tool bag, complete
with tools, replacing it in its original
position.
WARNING The spare wheel must be
placed in the boot, under the carpet, as
shown in fig. 10.
WARNING Do not use inner tubes with
Tubeless tyres. Check pressure of tyres
and spare wheel on a regular basis.
fig. 10F0G0615m
❒ensure that the spare wheel (space-
saver spare wheel for versions/
markets, where provided) support
surfaces are clean and free of impu-
rities that could later cause the bolts
to loosen;
❒mount the spare wheel (space-saver
spare wheel for versions/markets,
where provided), ensuring that the
pins N-fig. 8are aligned with one of
the holes Oon the wheel;
❒screw the 4 fixing bolts;
fig. 8F0G0204m
fig. 9F0G0206m
603_97_569 PANDA ADV Euro5 GB 9-12-2009 8:06 Pagina 7
