5
FIAT PANDA ADVENTURE
ABS SYSTEM
The ABS system with this version is sup-
plied as standard, and consists of:
❒EBD (Electronic Braking force Distrib-
ution), which distributes the braking ac-
tion between front and rear wheels;
❒MSR (Motor Schleppmomenten
Regelung - Regulation of engine braking
torque), which intervenes in the event
of a sudden change of gear whilst down-
shifting (preventing the wheels from
locking during deceleration when the
accelerator is released), restoring
torque to the engine, thereby avoiding
excessive drag of the driving wheels
which can lead to a loss of vehicle sta-
bility and control, particularly in poor
grip conditions.
REPLACING A WHEEL
General instructions
The vehicle is originally supplied with a
spare wheel of the same size as those fit-
ted (space-saver spare wheel for ver-
sions/markets, where provided).
Wheel changing and correct use of the jack
and spare wheel (space-saver spare wheel
for versions/markets, where provided) call
for some precautions reported in the Use
and Maintenance manual to which this sup-
plement is attached.To change a wheel proceed as follows:
❒stop the car in a position so that it is
not a danger for on-coming traffic and
where you can replace the wheel safe-
ly. The ground must be flat and com-
pact;
❒Turn the engine off and pull up the
handbrake.
❒Engage first gear or reverse;
603_97_569 PANDA ADV Euro5 GB 9-12-2009 8:06 Pagina 5
10
FIAT PANDA ADVENTURE
20 40 60 80 100 120 140 160 180
●●●●● ●●●●
●●●●● ●●●●
●●●●● ●●●●
●●●●● ●●●●
●●●●● ●●●●
●● ● ●
●●●●● ●●●●
●●●●● ●●●●
●
●● ● ●
●● ● ●
●● ● ●
●●
MAINTENANCE SCHEDULE
Thousands of kilometres
Check tyre condition/wear and, if necessary,
adjust pressure
Check lighting system operation (headlights, direction indicators,
hazard lights, passenger compartment lights, boot lights,
instrument panel warning lights, etc.)
Check windscreen wiper/washer operation,
adjustment of spray nozzles
Check position/wear of
front/rear windscreen wiper blades
Check front disk brake pad conditions and wear
Check rear disc brake pad condition and wear
Visually inspect the condition of: bodywork, underbody
protection, pipes and hoses
(exhaust - fuel - brakes), rubber parts
(boots, hoses, bushes, etc.)
Check cleanness of locks, bonnet and boot and lever
cleanness and lubrication
Check tension and conditions of various accessory drive belts
(except for engines with automatic take-up devices)
Visually inspect the condition of the accessory drive belt
Check and adjust tappets (petrol versions)
Check handbrake stroke adjustment
Check anti-evaporation system (petrol versions)
603_97_569 PANDA ADV Euro5 GB 9-12-2009 8:06 Pagina 10