8
FIAT PANDA 100HPfig. 9F0G0647m
If the car needs to be jacked up on one side, place the slot of the jack in correspon-
dence with the arrow (
O) on the side member: the finish under the floor is interrupted
A-fig. 9to enable fitting the jack on the groove fig. 9.
JACKING THE CAR
WITH THE JACKWITH ARM HOIST
fig. 10F0G0711m
If the car needs to be jacked up, go to a
Fiat Dealership which is equipped with
shop jacks and jack arms.
Jack up the car only by positioning the jack
arms or the shop jack in the points shown
in fig. 10.
When jacking the car using
shop jack or jack arms, make
sure the arms are not inter-
fering with the car side skirts.
603_97_390 Panda 100 HP GB:603_97_390 Panda 100 HP GB 7-10-2009 17:06 Pagina 8
