13
FIAT PANDA 100HP
ENGINE COOLANT fig. 13
The coolant level shall be checked with
cold engine and shall be within the MIN
and MAXmarks on the tank.
If the level is low, pour slowly a mixture
of 50% distilled water and 50%
PARAFLU
UPof the FL SeleniaGroup
through the filler neck Auntil the level
reaches MAX.
A 50-50 mixture of PARAFLU
UPand
distilled water gives freeze protection to
–35°C.
fig. 13F0G0107m
The engine cooling system us-
es protective antifreeze fluid
PARAFLU
UP. Use the same flu-
id type as that already in the cooling
system when topping up. PARAFLU
UP
fluid cannot be mixed with any other
type of fluid. Should it happen, under
no circumstances start the engine; con-
tact a Fiat Dealership.
The cooling system is pres-
surised. If necessary, replace
the cap only with another genuine
one, otherwise system efficiency
could be compromised. Do not re-
move the reservoir cap when the en-
gine is hot: you risk scalding yourself.
WARNING
603_97_390 Panda 100 HP GB:603_97_390 Panda 100 HP GB 7-10-2009 17:06 Pagina 13
19
FIAT PANDA 100HP
Fiat Panda 100HP
35
5
4.50
2.75
2.90
1.65
0.55
1.80
CAPACITIES
Fuel tank: litresincluding a reserve of: litres
Engine cooling system: litres
Engine sump: litres
Engine sump and filter: litres
Gearbox/differential casing: litres
Hydraulic brake circuit: kg
Windscreen and rear window
washer fluid reservoir: litresSpecified fuels and
recommended products
Unleaded petrol with no less than 95
R.O.N.
Mixture of distilled water and
PARAFLU
UPat 50%
SELENIA 20K
TUTELA CAR TECHNYX
TUTELA TOP 4
Mixture of water and
TUTELA PROFESSIONAL SC 35
PERFORMANCE
Top admitted speed after initial car use in km/h.
Fiat Panda 100HP185
603_97_390 Panda 100 HP GB:603_97_390 Panda 100 HP GB 7-10-2009 17:06 Pagina 19
