2009 FIAT IDEA display

Transferring a phone conversation
from the hands-free phone to your
mobile phone
To transfer a phone conversation from the
hands-free phone to your mobile phone,
press OK.
You can talk on your mobile phone and
still use buttons on the steering wheel.
Specifically, you can press
ßto switch be-
tween two phone calls on your mobile
phone, or press
ßfor longer than 1 sec-
ond to end the phone conversation. Putting a phone call on hold
To put a phone call on hold and disable
the microphone so that you can talk with-
out being listened to by the caller, press
ESC. CONFERENCE CALL FUNCTION
(only with Bluetooth
®phones
supporting this function)
With the Conference Call function you
can call another contact while you are en-
gaged in a phone conversation yet. In this
way you can speak with both contacts at
the same time.
To start a Conference call while you are
still engaged in a phone conversation, call
the second required contact as described
in section MAKING A PHONE CALL.
When Conference Call option is active the
display will show “CONFERENCE”.
To end both calls, press button
ßfor long
24
603_97_217 IDEA Blue&Me GB 1ed 1-10-2009 8:40 Pagina 24

INBOX
Blue&Me™will store up to 20 received
messages (in the event of linked messages,
the number of stored messages could be
lower) when your mobile phone is paired
with Bluetooth
®. When the inbox is full,
the new incoming message will delete the
oldest message received (also if not read
yet). It is also possible to delete just one
message or to delete the entire inbox
(refer to paragraph MANAGING
MESSAGES).
?
To read a particular message stored
in the inbox, open the Blue&Me™
Main menu and select the option
MESS. READER, then press OK
or
ß.
Select option INBOX, then press
OKor
ß. Scroll stored messages
and select the
required one, the system will
display the SMS text sender’s data,
if available. Select READand
press OKor
ß, Blue&Me™will
read the selected message.
}
Or, using voice interaction:
Press
‘and pronounce “Message
reader”, after the acoustic signal
pronounce “Inbox”; Blue&Me™
will display the first message con-
tained in the inbox (and also the
phone number of the SMS text
sender, if stored in the phonebook).
To scroll the Inboxpronounce
“Previous” or “Next”; when the
required message is displayed, say
“Read”, Blue&Me™will read the
selected message.
Pronounce “Delete” to delete the
selected message.MANAGING MESSAGES
For every message received, Blue&Me™
enables to:
❒ read it
❒ call directly the sender
❒ delete it
?
To do this when reading the message
open the Blue&Me™Main menu
and then press buttons OKor
ßto
select the required option.
}
Or, using voice interaction:
Press
‘and pronounce “Read” or
“Call” or “Delete”, the system will
select the required option.
26
603_97_217 IDEA Blue&Me GB 1ed 1-10-2009 8:40 Pagina 26

DELETING ALL MESSAGES
Blue&Me™can store max 20 messages,
a new incoming message will delete the
oldest one received from the inbox. All
messages stored by Blue&Me™can be
deleted by one single command.
?
To delete all messages, open the
Blue&Me™Main menu and select
DELETE ALL, then press OKor
ß, the system will ask DEL.
MESS.?, press OKor
ßto delete
all messages, otherwise press
ESC.
}
Or, using voice interaction:
Press
‘and pronounce “Message
reader”.
After the acoustic signal say
“Delete all”; Blue&Me™ will ask
“Delete all messages from the
vehicle now ?”, say “Yes” to
delete all messages, otherwise say
“No”.SIGNAL TYPES
With the Blue&Me™message reader it
is possible to set three notification signals
for the arrival of a new SMS text:
❒ VIS.+ACOUST.:
Blue&Me™will warn you of a new
incoming message through a visual sig-
nal on the instrument panel display and
through an acoustic signal.
Blue&Me™will also ask if you would
like to read the message.
❒VIS. SIGNAL:
Blue&Me™will warn you of a new
incoming message through a visual sig-
nal on the instrument panel display.
The message received can also be read
later (see paragraphs HOW TO READ
THE LAST SMS TEXT RECEIVED and
INBOX).
❒ READER OFF:
Blue&Me™deactivates the Message
reader; a new incoming message will
not be signalled and will not be trans-
mitted to the system.
?
Open the Blue&Me™Main menu,
select the option MESS. READER,
and then press SRC/ OKor
ß. Se-
lect the optionSIGNAL TYPEand
scroll the three available options us-
ing buttons
QorZ, select the re-
quired option and then press OKor
ß.
}
Or, using voice interaction:
Press
‘and pronounce “Message
reader”, after the acoustic
signal say “Signal type”;
Blue&Me™will list the available
options and then you can select the
required one by pronouncing
“Reader off” or “Visual and
acoustic signal”or “Visual signal
only”.
27
603_97_217 IDEA Blue&Me GB 1ed 1-10-2009 8:40 Pagina 27

28
The MEDIA PLAYERmenu enables the
following:
❒to display tracks stored on your USB
device
❒to play audio files stored on your USB
device.
Note
Before using the player, read the section
on COMPATIBLE USB STORAGE DE-
VICES or on using an iPod to check that
your USB memory device is compatible
with Blue&Me™.
MEDIA PLAYER FUNCTIONS
HOW TO CONNECT THE USB
DEVICE TO Blue&Me™
To connect your USB device to
Blue&Me™, proceed as follows:
❒Copy the tracks on your USB device.
For further information, see “TECH-
NOLOGIES COMPATIBLE WITH
Blue&Me™”.
❒USB devices without USB wire: just
connect the USB device (directly or by
an extension lead) to the USB port on
the car (see fig. 1).
❒USB devices with USB wire: use the
wire to connect the USB device to the
USB port on the car (see fig. 1).
❒Turn the ignition key to MAR.
Blue&Me™will start automatically to
play your digital tracks selecting them
from the library built at the moment
the USB device is connected.
❒If AUTOPLAYis set to“ON”,
Blue&Me™will start playback auto-
matically.

For further information read chapter
SETTINGS FUNCTION - MEDIA PLAYER.
When building the media library is over, it
will be possible to use Blue&Me™to to
select and play tracks.
603_97_217 IDEA Blue&Me GB 1ed 1-10-2009 8:40 Pagina 28

29
HOW TO MANAGE
THE MEDIA LIBRARY
With the media player you can select the
audio files stored on your USB device, us-
ing voice commands or steering wheel
buttons.
You can scroll audio files by folder, artist,
genre, album or playlist and then select the
required category using voice commands.
After selecting the required category, se-
lect the required file using manual con-
trols.
Enter track data (e.g.: title, artist, album,
genre) for surfing your media library
friendly.
Note
Not all formats require to enter media in-
fo. Formats .mp3and .wma, .aacrecog-
nized by Blue&Me™require media info
whereas .wavnot. If no media info is en-
tered, audio files can only be selected by
folder.

For further details, refer to section
PRACTICAL HINTS FOR USING THE
MEDIA PLAYER.Selection by folder
Track folders on your USB device are dis-
played in the FOLDERSmenu.
?
To select tracks through manual in-
teraction, proceed as follows:
Launch the Main Menu and select
MEDIA PLAYER, then press OK
or
ß.
Select FOLDERS, then press OK
or
ß.
Scroll folders. To play all folders, se-
lect PLAY ALLand then press OK
or
ß. To display folder tracks, press
OKor
ß.
Scroll the selected folder tracks.
To play the required track, select
the title and then press OKor
ß.
}
Or, using voice interaction:
Press
‘and pronounce “Fold-
ers”.
Scroll folders. To play all folder, se-
lect PLAY ALLand then press
OKor
ß. To display folder tracks,
press OKor
ß.
Scroll the selected folder tracks. To
play the required track, select the ti-
tle and then press OKor
ß.
For further details on FOLDERS,
menu customization, see section
PRACTICAL HINTS FOR USING
THE MEDIA PLAYER.
603_97_217 IDEA Blue&Me GB 1ed 1-10-2009 8:40 Pagina 29

Selection by artist
?
To select the tracks of a special
artist using manual interaction, pro-
ceed as follows:
Launch the Main Menu, select
MEDIA PLAYER, and then press
OKor
ß.
Select ARTISTSand then press
OKor
ß.
Scroll artists. To select the required
artist, press OKor
ß.
Scroll the artist’s albums. To play all
the albums of the required artist, se-
lect PLAY ALLand press OKor
ß.
To play an album, select the re-
quired album and then press OKor
ß.
To play a track, select the title and
then press OKor
ß.
}
Or, using voice interaction:
Press
‘and pronounce “Artists”.
Scroll the artist’s albums. To play all
the albums of the required artist, se-
lect PLAY ALLand then press
OKor
ß. To play an album, select
the required album and then press
OKor
ß.
To play a track, select the title and
then press OKor
ß.
Note
If your USB device contains many audio
files, the ARTISTSmenu can be subdi-
vided into alphabetical sub-menus. Alpha-
betical sub-menu can display just the first
letter of the tracks it contains (e.g.: A-F),
or it can display the first two letters (e.g.:
Aa-Ar).Selection by genre
?
To select the tracks of a special
genre using manual interaction, pro-
ceed as follows:
Launch the Main Menu, select
MEDIA PLAYER, and then press
OKor
ß.
Select GENRESand then press
OKor
ß.
Scroll genres. To play all the tracks
of the displayed genre, press OKor
ß.
}
Or, using voice interaction:
Press
‘and pronounce “Genres”.
Scroll genres. To play all the tracks
of the displayed genre, press OKor
ß.
Note
If your USB device contains many audio
files, the GENRESmenu can be subdivid-
ed into alphabetical sub-menus. Alphabet-
ical sub-menu can display just the first let-
ter of the tracks it contains (e.g.: A-F), or
it can display the first two letters (e.g.: Aa-
Ar).
30
603_97_217 IDEA Blue&Me GB 1ed 1-10-2009 8:40 Pagina 30

Selection by album
?
To select an album using manual in-
teraction, proceed as follows:
Launch the Main Menu, select ME-
DIA PLAYER, and then press OK
or
ß.
Select ALBUMSand then press
OKor
ß.
Scroll albums. To select the dis-
played album, press OKor
ß.
Scroll the album tracks. To play all
the tracks in the album, select
PLAY ALLand press OKor
ß.
To play an album, select it and then
press OKor
ß.
To play just one track, select the
track title and press OKor
ß.
}
Or, using voice interaction:
Press
‘and pronounce “Al-
bums”.
Scroll albums. To select the dis-
played album, press OKor
ß.
Scroll the album tracks. To play all the
tracks in the album, select PLAY
ALLand press OKor
ß.
To play just one track, select the
track title and press OKor
ß.
Note
If your USB device contains many audio
files, the ALBUMSmenu can be subdi-
vided into alphabetical sub-menus. Alpha-
betical sub-menu can display just the first
letter of the tracks it contains (e.g.: A-F), or
it can display the first two letters (e.g.: Aa-
Ar).Selection by playlist
Playlists stored in your USB device can be
displayed with the PLAYLISTSmenu.
?
To select a playlist using manual in-
teraction, proceed as follows:
Launch the Main Menu, select ME-
DIA PLAYER, and then press OK
or
ß.
Select PLAYLISTSand press OK
or
ß.
Scroll playlists. To play the displayed
playlist, press OKor
ß.
}
Or, using voice interaction:
Press
‘and pronounce “Playlists”.
Scroll playlists. To play the displayed
playlist, press OKor
ß.
For further details on how to build
playlists, refer to section PRACTICAL
HINTS.
31
603_97_217 IDEA Blue&Me GB 1ed 1-10-2009 8:40 Pagina 31

32
PLAYING AUDIO TRACKS
Shuffle playback of the whole
media library
Option “PLAY ANYTHING” shall be
used to play quickly the whole content of
your media library at random.
?
To start “PLAY ANYTHING” us-
ing manual interaction, proceed as
follows:
Launch the Main Menu, select ME-
DIA PLAYER, and then press OK
or
ß.
Select PLAY ANYTHINGand
press OKor
ß.
}
Or, using voice interaction:
Press
‘and pronounce “Play
anything”.
For further details on digital audio
files playback, refer to section “DIG-
ITAL AUDIO SELECTION”.Now playing (track data)
With the NOW PLAYINGoption you
can display current track data for 15 sec-
onds.
?
To start this option using manual in-
teraction, proceed as follows:
Launch the Main Menu, select ME-
DIA PLAYER, and then press OK
or
ß.
Select NOW PLAYINGand then
press OKor
ß.
}
Or, using voice interaction:
Press
‘and pronounce “Now
playing”.
Note
When the playback of a digital audio track
is started, the relevant track data will be
automatically displayed for 15 seconds.Audio play
?
To start playing an audio file using
manual interaction, proceed as fol-
lows:
If “AUTOPLAY” option is on,
connect your USB device to
Blue&Me
™: track playback will
start automatically.

SETTINGS FUNCTION - MEDIA
PLAYER.
You can also select the required au-
dio file and then press OKor
ßto
start playing it.
}
Or, using voice interaction:
Press
‘and pronounce “Play
anything”.
Pause
To pause the track being played: Press
&/ESC or button MUTEon sound sys-
tem front panel.
Play
To resume playback of the paused track:
Press
ESCor button MUTEon sound
system front panel.
603_97_217 IDEA Blue&Me GB 1ed 1-10-2009 8:40 Pagina 32