2009 FIAT DOBLO mirror controls

52
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
G Air recirculation control button.
H Fan speed increase/decrease control buttons.
I Temperature increase/decrease control knob.
L Heated rear windscreen and electric door mirror
on/off button
(for versions/markets where provided).
CONTROLS fig. 44
A AUTO button for automatic control of all functions.
B Air distribution selection button.
C Display.
D MAX DEF function control button.
E System off button.
F Compressor enabling/disabling button.
F0V0121mfig. 44

53
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
During fully automatic operation (FULL AUTO), the word
FULL will disappear if the air distribution and/or flow rate
and/or activation of the compressor and/or recirculation
settings are changed. In this way, the functions will switch
from automatic to manual control until the AUTO button
is pressed again. With one or more functions turned on
manually, the adjustment of the intake air temperature con-
tinues to be managed automatically, except with the com-
pressor switched off: if this is the case, the temperature of
the air introduced into the passenger compartment can-
not be lower than that of the outside air.
CONTROLS
Air temperature adjustment knob (I)
Turn the knob either clockwise or anticlockwise to in-
crease or lower the temperature in the passenger com-
partment.
The temperature set is shown on the display.
Turn the knob either all to the right or all to the left to
the extreme HI or LO position to turn the maximum heat-
ing or maximum cooling functions on:
❒HI Function (maximum heating):
select by turning the temperature knob clockwise over the
maximum value (32 °C). USING THE CLIMATE CONTROL SYSTEM
The system can be started in different ways, but it is ad-
visable to start by pressing the AUTO button and then
turning the knob to set the temperature required on the
display. The system will start running automatically in this
way and the set temperature will be reached as quickly
as possible. The system will adjust the temperature, the
quantity and the distribution of the air introduced into the
passenger compartment and will manage the recirculation
function and the air conditioning compressor engagement.
During fully automatic operation the only manual inter-
vention required is the possible activation of the following
functions:
❒Òair recirculation, to keep it always on or off;
❒Zto speed up demisting/defrosting of the front door
window glasses, rear door window glasses and door
mirrors.
During fully automatic system operation, you can change
the set temperatures, air distribution and fan speed at any
time by using the relevant buttons or knobs: the system
will automatically change its settings to adjust to the new
requirements.

263
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
CODE card .............................. 5
Control buttons..................... 70
Coolant overheating
warning light .......................145
Cruise Control....................... 63
Dashboard ................................ 3
Dead lock ................................. 8
Defrosting/demisting
– rear window ......... 46-49-58
– windscreen and front
side windows ........ 45-48-57
Demisting/defrosting
– rear window ......... 46-49-58
– windscreen and front
side windows............... 45-49
– door mirrors ......... 46-49-58
Diesel filter............................ 206
– light warning of water
in filter.............................. 151
Digital display ......................... 14– control buttons ................ 14
– setup menu ....................... 15
– standard screen ............... 14
Dipped beam headlights
– bulb replacement ........... 173
– switching on ...................... 59
Direction Indicators
– front bulb
replacement .................... 173
– rear bulb
replacement ...........175-176
– side bulb
replacement .................... 173
– switching on ...................... 60
Door locking ......................... 77
Doors
– central locking................... 77
– child safety device............. 80
– load area unlocking .......... 77
– locking/unlocking from
the inside......................79-80 – interiors ........................... 216
– leather upholstery ......... 217
– plastic parts .................... 217
– windows............................. 61
Cleaning your vehicle
– engine compartment .... 216
– exterior............................ 214
– interior ............................ 216
Climate control system
controls ..........................47-51
Climate control vents .......... 43
Climate control ............... 47-51
– air vents ...............................43
Clock
– adjusting ...............................22
Clutch
– technical
specifications................... 224
CO
2emissions
in exhaust ........................... 253
CO
2in exhaust .....................253

267
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Keys ............................................ 5
– key with remote
control ................................. 6
– key without remote
control ....................................6
– remote locking/
unlocking........................... 5-6
– replacing remote
control battery.................... 7
– requesting additional
remote control keys ......... 8
Know your vehicle ................. 3
Ladder bulkhead behind
driver...................................... 36
Lifting the vehicle
– with the jack ................... 158
– with the lift arms ........... 189
– with the workshop
lift ...................................... 189
Lights (controls
to switch on) ....................... 59Liquids
(specifications)...........247-248
Load limiters ........................ 118
Lubricants
(specifications)...........247-248
Main beam headlights
– bulb replacement ........... 174
– flashing ............................... 59
– switching on ...................... 59
Manual climate control ........ 47
Mirrors
– exterior ............................. 40
– rear-view mirror ............. 40
MSR (system) ...................... 100
Multifunction display............. 19
– control buttons................. 19
– setup menu ........................ 20
– standard screen................. 19Nozzles
– windscreen/rear window/
headlamp washer ........... 213
Number plate lights
– bulb replacement ........... 177
Odometer.........................14-19
On-board computer
(trip)....................................... 28
On-board instruments
(panel) ................................... 12
Paintwork (maintenance) ... 214
– bodywork colour
plate ................................. 220
ParafluUP
– checking levels and
topping up ....................... 202
– specifications .................. 248
Parking sensors ................... 103
Particulate filter (DPF)........ 114
Partitions.................................. 36