Cleaning Plastic Instrument Cluster Lenses
The lenses in front of the instruments in this vehicle are
molded in clear plastic. When cleaning the lenses, care
must be taken to avoid scratching the plastic.
1. Clean with a wet soft rag. A mild soap solution may be
used, but do not use high alcohol content or abrasive
cleaners. If soap is used, wipe clean with a clean damp
rag.
2. Dry with a soft cloth.
Seat Belt Maintenance
Do not bleach, dye or clean the seat belts with chemical
solvents or abrasive cleaners. This will weaken the fabric.
Sun damage will also weaken the fabric.
If the seat belts need cleaning, use MOPARTotal Clean,
a mild soap solution, or lukewarm water. Do not remove
the seat belts from the vehicle to wash them.Replace the seat belts if they appear frayed or worn or if
the buckles do not work properly.
FUSES
Totally Integrated Power Module
The Totally Integrated Power Module (TIPM) is located
in the engine compartment near the battery. This center
contains cartridge fuses, mini fuses and relays. A label
that identifies each component is printed on the inside of
the cover.
396 MAINTAINING YOUR VEHICLE
Cavity Cartridge
FuseMini-
FuseDescription
J1 40 Amp
GreenPower Folding Seat
J2 30 Amp
PinkTransfer Case/Pwr
Liftgate Module
Cavity Cartridge
FuseMini-
FuseDescription
J3 40 Amp
GreenRear Door Module (RR
DOOR NODE)
J4 25 Amp
NaturalDriver Door Node
J5 25 Amp
NaturalPassenger Door Node
J6 40 Amp
GreenAnti-Lock Brake Sys-
tem (ABS) Pump/ESP
J7 30 Amp
PinkAnti-Lock Brake Sys-
tem (ABS) Valve/ESP
J8 40 Amp
GreenPower Memory Seat (If
Equipped)
J9 40 Amp
GreenPZEV Motor/Flex Fuel
J10 30 Amp
PinkHdlp Wash Relay/
Manual Tuning Valve
Totally Integrated Power Module (TIPM)
MAINTAINING YOUR VEHICLE 397
7
