2009 DODGE CALIBER oil temperature

UNDERSTANDING YOUR INSTRUMENT PANEL
CONTENTS
Instrument Panel Features ............... 166
 Instrument Cluster – Base ............... 167
 Instrument Cluster – Premium ............ 168
 Instrument Cluster Descriptions ........... 169
 Electronic Vehicle Information Center (EVIC) —
If Equipped .......................... 180
▫ Oil Change Required .................. 182
▫ EVIC Functions ..................... 183
▫ Compass/Temperature/Audio ........... 184▫
Average Fuel Economy ................ 184
▫ Distance To Empty (DTE) .............. 184
▫ Elapsed Time ....................... 185
▫ Tire Pressure Monitor (TPM) ............ 185
▫ Personal Settings (Customer-Programmable
Features) .......................... 185
 Sales Code REQ — AM/FM Stereo Radio And
6–Disc CD/DVD Changer (MP3/WMA AUX
Jack) ............................... 190
▫ Operating Instructions - Radio Mode ...... 1914

28. Electronic Vehicle Information Center Display — If
Equipped
When the appropriate conditions exist, this display
shows the Electronic Vehicle Information Center (EVIC)
messages.
Refer to the Electronic Vehicle Information Center (EVIC)
in this section for more information.
29. Transmission Temperature Indicator — If EquippedDuring sustained high speed driving on hot
days, the automatic transmission oil may be-
come too hot. If this happens, the transmission
overheat indicator light will come on and the
vehicle will slow slightly until the automatic transmis-
sion cools down enough to allow a return to the re-
quested speed. If the high speed is maintained, the
overheating will reoccur as before in a cyclic fashion.
ELECTRONIC VEHICLE INFORMATION CENTER
(EVIC) — If Equipped
The Electronic Vehicle Information Center (EVIC) fea-
tures a driver-interactive display that is located in the
instrument cluster.
Electronic Vehicle Information Center (EVIC)
180 UNDERSTANDING YOUR INSTRUMENT PANEL

Air Conditioning (MAX A/C)
For maximum cooling select the
air direction to either the Panel or
Bi-Level position using the mode
control. Press the A/C button and
the recirculation button so that
both lights are illuminated and set
the temperature control to its
coolest setting.
NOTE:
•Recirculation Mode will not operate in Floor, Mix or
Defrost modes.
•See “Circulation Control” in this section, for proper or
extended use of this position.
Air Filtration System – If Equipped
An air filter is included in the optional Security Group.
The filter media includes a particle filtration layer. The
filter will reduce, but not eliminate, diesel and agricul-
tural smells. The filter acts only on air coming from
outside the vehicle; it does not filter air inside the
passenger compartment.. The air filter change interval
coincides with engine oil and filter change intervals. As
with oil changes, the interval is shorter for heavy duty
service or dusty conditions. Refer to “Maintenance
Schedule” in Section 7. See your authorized dealer for
service.
UNDERSTANDING YOUR INSTRUMENT PANEL 241
4

the engine cooling system and turning off the A/C
removes this heat. You can also turn the Temperature
control to maximum heat, the Mode control to floor, and
the fan control to high. This allows the heater core to act
as a supplement to the radiator and aids in removing heat
from the engine cooling system.
CAUTION!
Driving with a hot cooling system could damage
your vehicle. If the temperature gauge reads “H”,
pull over when safe and stop the vehicle with the
engine at idle. Turn the air conditioner off and wait
until the pointer drops back into the normal range.
After appropriate action has been taken, if the
pointer remains on the “H”, turn the engine OFF
immediately and call for service.
WARNING!
A hot engine cooling system is dangerous. You or
others could be badly burned by steam or boiling
coolant. You may want to call a service center if your
vehicle overheats. If you decide to look under the
hood yourself, refer to “Maintenance”, Section 7 of
this manual. Follow the warnings under the “Cooling
System Pressure Cap” paragraph.
AUTOMATIC TRANSAXLE OVERHEATING
During sustained high speed driving or trailer towing up
long grades on hot days, the automatic transaxle oil may
become too hot.If this happens, the transmission overheat in-
dicator light will come on, and the vehicle will
slow slightly until the automatic transaxle
cools down enough to allow a return to the
WHAT TO DO IN EMERGENCIES 325
6

Checking the oil while the vehicle is on level ground and
only when the engine is hot, will improve the accuracy of
the oil level readings. Maintain the oil level between the
range markings on the dipstick. The range markings will
consist of a crosshatch zone that says SAFE or a cross-
hatch zone that says MIN at the low end of the range and
MAX at the high end of the range. Adding 1 qt (1L) of oil
when the reading is at the low end of the indicated range
will result in the oil level at the full end of the indicator
range.
CAUTION!
Do not overfill the engine. Overfilling the engine as
indicated by the range markings, as described above,
on the engine oil dipstick will cause oil aeration,
which can lead to loss of oil pressure and an increase
in oil temperature. This could damage your engine.
Change Engine Oil
Refer to the “Maintenance Schedule” in Section 8 for
recommended engine oil change intervals.
Engine Oil Selection
For best performance and maximum protection for all
engines under all types of operating conditions, the
manufacturer recommends engine oils that are API Cer-
tified and meet the requirements of Chrysler Material
Standard MS-6395.
MAINTAINING YOUR VEHICLE 345
7

American Petroleum Institute (API) Engine Oil
Identification Symbol
This symbol means that the oil has
been certified by the American
Petroleum Institute (API). The
manufacturer only recommends
API Certified engine oils.
Engine Oil Viscosity (SAE Grade)
SAE 5W-20 engine oil is recommended for all operating
temperatures. This engine oil improves low temperature
starting and vehicle fuel economy. Your engine oil filler
cap also states the recommended engine oil viscosity
grade for your engine.Lubricants which do not have both the engine oil certi-
fication mark and the correct SAE viscosity grade num-
ber should not be used.
Synthetic Engine Oils
You may use synthetic engine oils provided the recom-
mended oil quality requirements are met, and the recom-
mended maintenance intervals for oil and filter changes
are followed.
Materials Added To Engine Oils
The manufacturer strongly recommends against the ad-
dition of any additives (other than leak detection dyes) to
the engine oil. Engine oil is an engineered product and its
performance may be impaired by supplemental
additives.
Disposing Of Used Engine Oil and Oil Filters
Care should be taken in disposing of used engine oil and
oil filtersfrom your vehicle. Used oil and oil filters,
indiscriminately discarded, can present a problem to the
346 MAINTAINING YOUR VEHICLE

Emergency, In Case ofJacking ............................. 326
Jump Starting ......................... 331
Towing ............................. 334
Emission Control System Maintenance ......342,382
Engine ............................... 340
Break-In Recommendations ................ 70
Checking Oil Level ..................... 344
Cooling ............................. 353
Exhaust Gas Caution .................. 72,305
Fuel Requirements ..................... 301
Jump Starting ......................... 331
Oil ........................... 344,377,378
Oil Change Interval .................... 345
Oil Filler Cap ...................... 340,346
OilFilter ............................ 378
Oil Selection .......................... 345
Oil Synthetic ......................... 346
Overheating .......................... 324 Temperature Gauge
.................... 169
Enhanced Accident Response Feature .......... 58
Event Data Recorder ...................... 59
Exhaust Gas Caution ............ 35,72, 305,351,352
Exhaust System ....................... 72,351
ExteriorLights .......................... 74
Filler Location Fuel ...................... 169
Filters Air Cleaner .......................... 347
Engine Oil ........................ 347,378
Flashers .............................. 324
Hazard Warning ....................... 324
Turn Signal ...................... 74, 177,373
Flat Tire Stowage ........................ 331
Flooded Engine Starting ................... 250
Fluid, Brake ........................... 379
Fluid Capacities ......................... 377
Fluid Leaks ............................. 74
414 INDEX

Electronic Stability Program (ESP)
Indicator......................... 271,273
Engine Temperature Warning .............. 172
Exterior .............................. 74
Fog .......................... 128,177,372
Headlight Switch ...................... 126
Headlights ........................... 126
High Beam Indicator .................... 178
Instrument Cluster ..................... 126
License ............................. 375
Lights On Reminder .................... 127
Low Fuel ............................ 170
Malfunction Indicator (Check Engine) ........ 175
Map Reading ......................... 130
Oil Pressure .......................... 171
Seat Belt Reminder ..................... 171
Security Alarm (Theft Alarm) ............ 19,171
Service Engine Soon (Malfunction Indicator) . . . 175
Theft Alarm (Security Alarm) .............. 171Tire Pressure Monitoring (TPMS)
........... 172
Traction Control ....................... 271
Turn Signal ................... 74, 126,128,373
Voltage ............................. 170
Warning (Instrument Cluster Description) ..... 169
Loading Vehicle ...................... 307,309
Capacities ........................... 309
Tires ............................... 279
Locks Child Protection ........................ 31
Door ................................ 26
Power Door ........................... 27
Lubrication, Body ....................... 350
Lumbar Support ........................ 119
Maintenance Free Battery .................. 348
Maintenance, General ..................... 344
Maintenance Procedures ................... 344
Maintenance Schedule .................... 382
418 INDEX