2009 CITROEN DS3 boot

33
Instruments and controls
Warning lamp
is o
n
Cause
Action/Observations
Engine o
il
press
ure
fixed.

There is a
fault with the en
gine
lubricat
ion system.
Stop as soon it is sa
fe to do so.
Park, switch off the ignition and contact a CITRO
ËN
dealer.
Battery charge
fixed.
The battery charging circuit has a fault
(dirty or loose terminals, slack or cut
alternator belt, ...). This lamp should switch off when the engine is started.
If it does not switch off
, contact a CITROËN dealer.
Door(s) open
fixed if the speed is below 6 mph
(10 km/h
).
A door or the boot is still open. Close the door or boot.
fixed and accom
panied
by an au
dibl
e s
igna
l
if the speed is above 6 mph (10 km/h).

Monochrome screen A This displays the following information: - time
,
- date, - ambient temperature (this flashes if there is
a risk o
f ice
),
- status o
f the doors and boot,
- audio sources (radio, CD...), - trip computer (refer to the "Instruments and
Controls" section).
Warnin
g messa
ges
(e.g.: "Emission control
system fault
y") or information messa
ges
(e.g.:
"Boot open"
) ma
y appear temporaril
y. These
can
be c
leare
d by press
ing the "E
SC
" button.
Displays on the screen

From the control panel of
your Audio s
ystem,
you can: ) press t
he "MENU"
button to
gain access to
the general menu
,
) press t
he " " or
" " buttons to scro
ll
through the items on the screen,
) press t
he "M
ODE"
button to c
hange
the permanent application
(date, audio
source...
),
)
press t
he "  " or "  " buttons to c
hange a
setting value,
) press t
he "OK" button to con
firm,
or ) press t
he "E
SC
"button to a
bandon t
he
operation in progress.
Co
ntrols
)
Press t
he "MENU"
button to ga
in access
to the general menu , then press the
" "
or "

" buttons to scroll through the various
me
nus:
- radio-CD
,
- vehicle configuration,
- o
ptions,
-
display sett
ings,
-
languages,
- un
its.
)
Press the
"OK
"button to select the menu
required.
Ge
neral m
enu

49
Multifuntion screens

Monochrome screen C
This displa
ys the followin
g information:
- t
ime,
- date
,
- ambient temperature (this flashes if there is
a risk o
f ice
),
- status of doors and boot, - audio sources (radio, CD, USB port, jack
socket etc.),
- trip computer (refer to the "Instruments and
controls" section
).

Warning messages (E.g. "Emisions control
system faulty") or information messages (E.g.: Automatic headlamps active") may appear
temporar
ily. These can
be c
leare
d by press
ing
the "ESC"
button.

Displa
ys on the screen
From
your Audio s
ystem control panel,
you can:
)
press the
"MENU"
button to
gain access to
the
genera
l menu
,
) press t
he "  " or "
" buttons to scro
ll
throu
gh the items on t
he screen,
)
press t
he "MODE"
button to c
hange t
he
permanent application (trip computer, audio
source...),
) press the
"  " or "  " buttons to change a
setting value,
)
press the
"OK"button to confirm
,
or ) press t
he "ESC
"button to a
bandon t
he
operat
ion
in pro
gress.
Controls
) Press t
he "MENU"
button to ga
in access to
t
he genera
l menu :
- audio functions
,
- the trip computer,
- personalisation-configuration,
- telephone
(hands-free kit
).
) Press
the "  " or "  " buttons to selec
t the
menu required, then con
firm b
y pressin
g
t
he "OK" button.
Ge
neral m
enu

59
Comfort

Recommendations for ventilation and air conditioning
If after an extended sto
p in sunshine,
the inter
ior temperature
is ver
y high
,
first ventilate the cabin
for a
few
moments. Put the air flow control at a setting high enough to quickly change the air in the passen
ger compar
tmen
t.
The air conditionin
g system does not
conta
in c
hlorine an
d does not
present
any danger to t
he ozone
layer.
In order
for these s
ystems to be
fully effective,
follow the operation and maintenance
guidelines below: ) To o
btain an even a
ir distribution, ta
ke care not to o
bstruct t
he exter
ior a
ir inta
ke gr
illes
located at the base of the windscreen
, the nozzles
, the vents and the air outlets
, as well
as the air extractor located in the boot.
)
Do not cover the sunshine sensor, located on the dashboard; this is used for regulation of the air conditionin
g system.
) Operate the air conditionin
g system for at least 5 to 10 minutes, once or twice a month
to keep it in per
fect workin
g order.
)
Ensure that the passen
ger compartment
filter is in
good condition and have the
filter
elements replaced re
gularl
y (refer to the "
Checks" section
).
We recommend the use o
f a combined passenger compartment
filter. Thanks to its
special active additive, it contributes to the purification of the air breathed by the occupants and the cleanliness of the passenger compartment (reduction of allergicsymptoms, bad odours and greasy deposits).
)
To
guarantee correct operation of the air conditionin
g system,
you are also advised to
have it checked re
gularl
y as recommended in the Maintenance and Warrant
y Guide.
) If the s
ystem does not produce cold air, deactivate it and contact a CITRO
ËN dealer.

When towin
g the maximum load on a steep
gradient in hi
gh temperatures, switchin
g off the
air con
ditioning increases t
he ava
ilable en
gine power an
d so
improves t
he tow
ing ability.

The condensation created by the air conditionin
g results in a dischar
ge
of water under th
e vehicle whi
ch is
per
fectl
y normal.

81
Access
Locking the vehicle
Locking using the remote control Locking using the key
) Turn the key to the right in the driver's doo
r
lock to lock the vehicle completely.
Locking is confirmed by fixed lighting o
f
the direction indicators for approximatel
y
two seconds. Accordin
g to version, the door mirrors
fold at
the same t
ime.
) Press the closed padlock to lock the vehicle.
If one o
f the doors or the boot is still
open, t
he centra
l locking
does not ta
ke
place. When the vehicle is locked
, if it is
unlocked inadvertently, it will relock automatically after thirty seconds unless a door or the boot is open.The foldin
g and unfoldin
g of the door
mirrors us
ing the remote contro
l can
be
deactivated b
y a CITRO
ËN dealer.

Foldin
g the ke
y
)
First press button
A to fold the ke
y.

89
Access
System which provides full manual locking or unlocking of the doors from the inside. Ma
nua
l ce
ntralised
co
ntrol

Locking )
Press button
Ato lock the vehicle.
The red indicator lamp on the button comes on.
Unlocking) Press
button A again to un
lock the ve
hicle.
The re
d indicator
lam
p on t
he button sw
itches
o
ff.

If one of the doors is open, central lockin
g from the inside does not take
place.
If the vehicle is locked
from the outside,
the red indicator lam
p flashes and
button
A
is inactive.
)
In this case
, use the remote control
or the key to unlock the vehicle.
Auto
m
at
ic ce
ntralised

contro
l
System which provides
full automatic lockin
g
or unlocking o
f the doors and the boot while
driving.

You can activate or deactivate this function.
Loc
king
When the speed exceeds 6 mph
(10 km
/h), the
doors and the boot lock automatically.
Unlocking )
Above 6 mph (10 km/h), press button
Ato
unlock the doors and the boot temporarily.
If one of the doors is open, the automatic central lockin
g does not take
place. If the boot is o
pen, the automatic
central lockin
g of the doors is active.

91
Access

Boot
Openin
g
)
After unlocking the vehicle using theremote control or the key, pull the handle and raise the tailgate.
Closing ) Lower t
he ta
ilgate us
ing the inter
ior grab
handle.
If the tail
gate is not closed correctl
y:
- when the engine is running
,
this warning lamp comes on,
accompanied by a message on
the multifunction screen for a few
seconds
,
-
when the vehicle is moving
(speed above
6 mph
(10 km/h
)), this warnin
g lamp comes
on, accompan
ied by an au
dibl
e s
ignal an
d
a messa
ge on the multi
function screen
for
a few seconds.
System for mechanical unlockin
g of the boot
in the event of a batter
y or central lockin
g
m
alfunction.
Ta i l
gate release

Unlockin
g
)
Fold back the rear benchseat to gain access
to the lock fr
om in
side the boo
t.
) Insert a small screwdriver into hole
Aof the
lock to un
lock the ta
ilgate.

101
Visibility
LED lamps
Daytime external lighting using specific front lamps providing a signature of the vehicle. Comprising
two sets of six diodes, they are located in the vertical scoops below each headlamp.
On starting the vehicle, in daylight the LED
lamps come on automatically, if the lighting stalk is in position
"0"or "AUT
O".
If the dipped beam headlamps are switchedon manually or automatically, the LED lamps switch o
ff.For countries where exterior lighting by day
is not a le
gal requirement,
you can activate
or dea
tivate the function vi
a the multifunction
screen con
figuration menu.

Headlamp
adjustment To avoid causing a nuisance to other road TTusers, the hei
ght o
f the headlamps should be
adjusted in relation to the load in the vehicle.
0.Driver only or driver + front passenger.
- . Intermediate setting 1. 5 people. - . 5 people + load in the boot. 2. Driver on
ly + max
imum aut
horised load in
th
e boo
t.
This position is su
fficient to avoid causin
g dazzle.
Higher settings may limit the spread of light
from the headlam
ps.p
The initial sett
ing
is pos
ition
"0".
Programming
In countr
ies w
here
it is a
legal
requirement:- this function is activated by default
and cannot be deactivated
,
- in daylight, the sidelamps and
number plate lamps also come on,
- If the dipped beam headlamps
are sw
itched on manua
lly or
automat
ically, the LED
lamps
switch o
ff.