2009 Citroen C6 light

22
II
FOLDING AND EJECTING THE KEY
Button D is for folding and ejecting the key from its housing in the remote control.
If you do not press on button D, you could damage the key mechanism.
Changing the remote control battery
Unclip the cover to gain access to the battery.
Battery: CR 0523 - 3 V.
After a change of battery, it may be necessary to re-initialise t he remote control. To do that, switch on the ignition and immediately press button B on your remote control to trigger the action desired. This may take so me ten seconds.Note: Make a careful note of the numbers for the keys and for the remote control on the ASSISTANCE card. Keep this in a safe place.
Do not throw away the old batteries. They should be returned to a CITROËN dealerDo not throw away Do not throw or deposited at a recognised collection point (a camera dealershop, for example).
Except when reinitialising, the remote control cannot function while the key is in the ignition, even when switched off.
Warning: by inadvertently actioning the remote control, when for example it is in your pocket, you can unlock the vehicle without your realising it.
However, if none of the doors are opened within thirty seconds following an unlocking, the doors will automatically relock.
Warning: there is a risk of damage if the replacement batte ry is not the correct one.
Only use batteries that are identical or equivalent to those approved by CITROËN.
GUIDE-ME-HOME LIGHTING
A press on button C operates the guide-me-home lighting (illumina-tion of the sidelamps and dipped beams for approx. one minute).
A second press prior to the end of this period cancels the guide-me-home lighting.
LOCATING OF THE VEHICLE
To locate the vehicle in a carpark, press button B, the interior lamps come on and the direction indica-tors fl ash for a few seconds. The vehicle remains locked.

34
II
B
AC
D
NIGHT DRIVINGA fi rst press on the DARK button puts the display on standby. Only the time and the temperature remain displayed.
A second press switches off the display and the instrument panel, except for information concerning:
The speed indicator.The automatic gearbox.Cruise control/Speed limiter if this has been activated.Note:
Temporary lighting of the display for modifi cation of audio-CD adjustments and air conditioning.The display lights up if any of the other buttons on the display is pressed. To revert to night driving, press just once on button DARK.DARKDARKAll the displays come on if there is an alert.A third press returns you to normal lighting.

32
II
I N S T R U M E N T P A N E L
MAINTENANCE INDICATOR
It informs you when the next routine service is due in accordance with the vehicle servicing schedule in the Maintenance and Warranty Guide. This information is dependent on two parameters: the mileage covered, and the time elapsed since the last visit.
Operation
From switching on the ignition and for a few seconds, the span-ner symbolising maintenance operations lights up; the instru-ment panel tells you the distance remaining to the next service.
Example: there remain up to the next service:
A few seconds after this, the engine oil level indicator is displayed, then the total mileage recorder resumes its normal role. The instrument panel gives the total and trip mileages.
Operation if the distance to the next service is less than 600 miles
Each time you switch on the igni-tion and for 5 seconds, the span-ner and the distance fl ash.
Example: there remain up to the next service: 500 miles. On switch-ing on the ignition and for 5 seconds, the instrument panel indicates:
A few seconds after this, the engine oil level indicator is displayed, then the total mileage recorder resumes its normal role and the mainte-nance symbol remains lit up.
This is a warning to you that a service must be carried out at the earliest opportunity.
The instrument panel gives the total and trip mileages.
Operation if the service interval has been passed
Each time you switch on the igni-tion, the maintenance symbol and the distance covered (preceded by a minus) beyond the recom-mended interval fl ash.
Example: You have exceeded the service interval by 300 miles.
The routine service on your vehi-cle needs to be carried as soon as possible.
A few seconds after switching on the ignition, the total mile-age recorder resumes its normal role and the maintenance symbol remains lit up.

33
II
00
00A
A
I N S T R U M E N T P A N E L
Maintenance intervals
If you use your vehicle in particu-larly diffi cult conditions, it is essen-tial to use the service schedule for "severe conditions" comprising shorter intervals between services. See "Maintenance and Warranty Guide".
Reset to zero
Your CITROËN technician resets the indicator to zero after each service. However, if you do your own servicing, the procedure for resetting to zero is as follows:1. Switch off the ignition.2. Press on button A and keep it pressed.3. Switch on the ignition.4. Keep button A pressed down until the screen indicates "=0"and the maintenance symbol disappears.
Note: If the maximum time between two oil changes is reached before the mileage has been covered, the mainte-nance spanner lights up and the instrument panel indicates "0".
MILEAGE RECORDER
Display
When the driver's door is opened or the vehicle is unlocked with the remote control, for around 30 seconds there is display of the mileage recorders and sometimes the maintenance spanner.
Trip mileage recorder reset
This can operate when the ignition is switched on.
With a long press on the zero reset button A, the trip mileage dis-played resets to zero.
FUEL GAUGE
If the fuel low warning lamp comes on permanently on horizontal ground, accompanied by a sound signal, there remain around 9 l of fuel (petrol version) or 8 l of fuel (diesel version).
When the second-to-last bar dis-appears, you still have approx. 5 lof fuel.
REV COUNTER
When you approach maximum engine speed, crossing into the red zone indicates the need to engage a higher gear.

35
II2
14
3
H E A D - U P D I S P L A Y
The Head-up display projects essential driving data into the driver's fi eld of vision. This enables the driver never to take his eyes off the road.
ACTIVATION/DEACTIVATION
To activate/deactivate the Head-up display: when you switch on the ignition, press on button 1.
The function status (activated/deac-tivated) when you stop the engine is retained when you restart.
ADJUSTMENTS OF THE HEAD-UP DISPLAY
Height adjustment
To adjust the height for the Head-up display, press on buttons 2 and 3.
It is recommended to adjust it as low as possible.
Brightness adjustment
The Head-up display has a bright-ness sensor so that the information can be seen to the best advantage, whatever the ambient brightness.
You can enhance the display brightness at any time by rotating the control 1.
Note:In certain extreme weather conditions (rain and/or snow, strong sunlight), the Head-up display may be momentarily subject to interference.
When emerging from a tunnel, there is a certain delay before the system can re-adapt the display brightness to the outside conditions.
Note: Certain types of spectacles may disperse the light coming from the Head-up display.
There is memorisation of driving positions as well as those for the Head-up display
The adjustments you have made for the Head-up display are adopted alongside the driving posi-tion memorisations (see "Memori-sation"). They are:Height adjustment.
Brightness.The types of information selected.

37
II
1432
M U L T I F U N C T I O N D I S P L A Y S
C O L O U R S C R E E N C
1 - Outside temperature
2 - Display zone
3 - Date
4 - Time
When the outside temperature is between +3 °C and –3 °C, the temperature display fl ashes (risk of ice).Note: The outside temperature displayed may be higher than the actual temperature if the vehicle is stationary in bright sunlight.
The driver is advised not to oper-ate the controls described below while the vehicle is moving.
CONTROLSA Access to the "Main menu" of the display.B Scroll through display menus.C Selection in the menus of the function chosen or value to modify.D Cancellation of the operation or return to the previous display.
Main Menu
Press on button A to bring up the "Main menu" of the multifunc-tion display. This menu gives you access to the following functions:
Radio mono CD
See chapter "RDS Audio Compact Disc system".
Trip computer
For:Entering the distance to the destination.Access to the log of alerts (recall of the alerts signalled previously).
Access to the status of functions, for example automatic lighting of headlamps, ESP, windscreen wipe.

38
II
M U L T I F U N C T I O N D I S P L A Y S
C O L O U R S C R E E N C
TRIP COMPUTER
To enter the distance to be travelled on the trip computer:1. Press on A.2. Use B to select the icon "Trip computer", then confi rm with a press on C.3. Select entry of distance using B. Confi rm your choice with a press on C.4. To choose the distance, select the fi gure you wish to modify by using B, then confi rm with a press on C.5. Use B to adjust the value, then validate by pressing C.6. Validate "OK" on the screen.
To access the tripcomputer's log of alerts:1. Press on A.2. Use B to select the icon "Trip computer", then confi rm with a press on C.3. Select the log of alerts.4. When the list displays, use Bto scroll through it.5. Press D to return to the perma-nent display.
To access the status of functions: proceed in a similar manner.
PERSONALISATION/CONFIGURATION
To activate/deactivate the automatic guide-me-home lighting:1. Press on A.2. Use B to select the icon "Personalisation-Confi guration" then confi rm your choice by pressing C.3. Then select the sub-menu for the vehicle parameters. Confi rm your choice with a press on C.4. Using B, select lighting and signalling. Confi rm your choice with a press on C.5. Press on C to select/deselect the guide-me-home lighting.
After activation, choose the dura-tion: press C then use B to select the duration, then press C.
To activate/deactivate the automatic lighting of headlamps:
Repeat stages 1 to 4 described above.5. Press on C to select/deselect the automatic lighting of head-lamps.Note: Activation of this function is immediate while deactivation requires the ignition to be switched off.

41
II
124
35
M U L T I F U N C T I O N D I S P L A Y S
N A V I D R I V E C O L O U R D I S P L A Y
1 Outside temperature.2 Folder.3 Date.4 Telephone.5 Time.
When the outside temperature is between +3 °C and –3 °C, the temperature display fl ashes (risk of ice).Note: The outside temperature displayed may be higher than the actual temperature if the vehicle is stationary in bright sunlight.
The driver is advised not to oper-ate the controls described below while the vehicle is moving.
CONTROLSA Access to the "Main menu" of the display.B Scroll through display menus.C Selection in the menus of the function chosen or value to modify.Scroll through display menus.D Cancellation of the operation or return to the previous display.
Air conditioning
Refer to the explanations given in the section "Auto-matic air conditioning".
Traffi c information
See chapter "NaviDrive"
Navigation - Traffi c information
See chapter "NaviDrive"
Audio
See chapter "NaviDrive"
Main Menu
Press on button A to bring up the "Main menu" of the multifunc-tion display. This menu gives you access to the following functions:
Telephone and telematic services
See chapter "NaviDrive"
Confi guration, to activate/deactivate the guide-me-home lighting, automatic lighting of headlamps etc. as well as to adjust the vari-ous parameters (time, date etc.). See chapter "NaviDrive".
Map
See chapter "NaviDrive"
Video
See chapter "NaviDrive"
Vehicle diagnosis
See chapter "NaviDrive"