Page 270 of 279
94
VII
C H I L D S A F E T Y
MANUAL CHILD LOCK
Locking
Turn the red control one quarter
of a turn to the right using the
ignition key.
Unlocking
Turn the red control one quarter
of a turn to the left using the igni-
tion key.
ELECTRIC CHILD LOCK *
Mechanical system to prevent ope-
ning of the rear door using its interior
control.
The control is located on the edge of
each rear door. Remote control system to prevent
opening of the rear doors using their
interior controls and use of the rear
electric windows.
Activation
Press the button A .
The indicator lamp on the button A
comes on, accompanied by a mes-
sage on the multifunction screen.
This indicator lamp remains on until
the child lock is deactivated. The indicator lamp on the button
A
switches off, accompanied by a mes-
sage on the multifunction screen.
This indicator lamp remains off until
the child lock is activated.
Any other status of the indicator
lamp indicates a malfunction of the
electric child lock. Have it checked
by a CITROËN dealer.
This system is independent and in
no circumstances does it take the
place of the central locking control.
Check the status of the child lock
each time you switch on the ignition.
Always remove the key from the
ignition when leaving the vehicle,
even for a short time.
In the event of a serious impact,
the electric child lock is deactiva-
ted automatically to permit the exit
of the rear passengers. This warning lamp comes
on temporarily on the instru-
ment panel when the child
lock is activated.
The control A is located on the dri-
ver's door, with the electric window
controls. Deactivation
Press the button A again.
* Depending on version.
It also comes on when the ignition
is switched on, then switches off ap-
proximately ten seconds after the
engine is started.
Page 275 of 279
135
XI
P R A C T I C A L I N F O R M A T I O N
Removing a wheel
List of operations
P a r k t h e v e h i c l e o n s t a b l e , fi r m
g r o u n d . A p p l y t h e p a r k i n g b r a k e .
Switch off the ignition and en- g a g e fi r s t g e a r o r r e v e r s e g e a r ,
depending on the slope (for ve-
hicles with automatic gearbox,
s e l e c t p o s i t i o n P ) .
D e t a c h t h e e m b e l l i s h e r u s i n g t h e
wheelbrace 1 b y p u l l i n g c l o s e t o
t h e v a l v e .
For vehicles with aluminium
wheels, slide the embellisher re-
moval tool 3 into the slot in the
c e n t r a l e m b e l l i s h e r a n d a p p l y
fi r m l e v e r a g e t o d e t a c h .
Slacken the wheel bolts using
the wheelbrace 1 .
F o r v e h i c l e s fi t t e d w i t h s e c u r i t y
w h e e l b o l t s , s l a c k e n t h e s e c u r i t y
bolts using the socket 4 fi t t e d o n
the wheelbrace 1 .
Position the jack 2 under the bo-
d y s h e l l , e x a c t l y a s i n t h e i l l u s t r a -
tion at the mark A , closest to the
w h e e l t h a t i s t o b e r e p l a c e d .
Operate the jack 2 until its base
i s i n c o n t a c t w i t h t h e g r o u n d .
Make sure that the base of the
j a c k i s v e r t i c a l l y b e l o w t h e j a c -
k i n g p o i n t u s e d .
R a i s e t h e v e h i c l e .
Remove the bolts and disengage
t h e w h e e l . List of operations
P o s i t i o n t h e w h e e l o n t h e h u b .
D o u p t h e 3 b o l t s b y h a n d .
P o s i t i o n t h e 4 t h b o l t .
Pretighten the bolts using the
wheelbrace 1 . F o r v e h i c l e s fi t t e d
w i t h s e c u r i t y w h e e l b o l t s , p r e t i g h -
t e n t h e s e c u r i t y b o l t u s i n g t h e s o c -
ket 4 fi t t e d o n t h e w h e e l b r a c e 1 .
Retract the jack 2 a n d d i s e n g a g e i t .
Tighten the wheel bolts using the
wheelbrace 1 a n d t h e s e c u r i t y
bolts using the socket 4 .
Reposition the embellisher, com-
m e n c i n g b y p l a c i n g t h e s l o t a t
the valve, pressing it home with
t h e p a l m o f y o u r h a n d .
F o r v e h i c l e s fi t t e d w i t h a l u m i - nium wheels, reclip the central
e m b e l l i s h e r i n p l a c e .
Stow the tools and the wheel in
t h e b o o t .
C h e c k t h e t y r e p r e s s u r e a n d
also have the wheel balancing
c h e c k e d .
Fitting a wheel
Page 276 of 279
136
XI
P R A C T I C A L I N F O R M A T I O N
This repair kit is available from
CITROËN dealers.
It is designed to repair most punc-
tures which could affect the tyre, lo-
cated on the tyre tread or shoulder.
Avoid removing any foreign bodies
which have penetrated the tyre.
TEMPORARY PUNCTURE
REPAIR KIT
Complete system consisting of a
compressor and an incorporated
sealant cartridge which permits
tem-
porary repair of the tyre so that you
can drive to the nearest garage.
The kit is stowed in the boot below the
fl o o r . I t i s fi t t e d i n t h e t o o l b o x , l o c a t e d
below the storage compartment. Using the kit
This procedure, comprising several
steps, must be carried out in full.
Switch off the ignition.
Turn the selector A to the
"SEALANT" position.
Check that the switch B is in po-
sition "0" .
Connect the white pipe C to the
valve of the tyre to be repaired.
Connect the compressor's electric
plug to the vehicle's 12 V socket.
A f fi x t h e s p e e d l i m i t a t i o n s t i c k e r
to the vehicle's steering wheel
to remind you that a wheel is in
temporary use.
Start the vehicle and leave the
engine running.
Access to the kit