2009 CITROEN C CROSSER DAG ad blue
[x] Cancel search: ad bluePage 5 of 216
8
FAMILIARISATION
INTERIOR Automatic air conditioning
This automatic air conditioning system
g u a r a n t e e s c o m f o r t a n d a s u f fi c i e n t
circulation of air in the passenger
compartment.
Cruise control
This system automatically maintains
the vehicle speed at the value
programmed by the driver, without the
accelerator pedal being pressed. Audio and communication
systems
T h i s e q u i p m e n t b e n e fi t s f r o m t h e l a t e s t
technology: MP3 compatible audio
equipment, Bluetooth hands-free
telephone, colour display, Rockford
F o s g a t e a u d i o s y s t e m , a u x i l i a r y s o c k e t s .
Four wheel drive system with
electronic control
This system permits the selection of
a transmission mode in relation to the
driving conditions.
44
114
154
112
Page 175 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
172
NAVIGATION-GUIDANCE
What is the navigation system and
the GPS?
The satellite navigation system guides
the driver to the destination that he has
set in accordance with a chosen route.
Initially, it searches for the destination
required by the user, then it calculates
t h e r o u t e a n d fi n a l l y i t p r o v i d e s t h e v i s u a l
and audible guidance instructions. What precautions should be
observed in order to use the system
under good conditions?
Do not place anything on or near the
GPS aerial.
Do not use any digital communication
equipment (personal computers, etc.)
near the GPS aerial.
D o n o t a f fi x a n y r e fl e c t i v e fi l m s o r fi l m s
containing carbon to the window.
The GPS (Global Positioning
System) consists of several
satellites distributed around
the earth. They continuously
transmit digital signals
which travel at the speed of light, on 2
different frequencies.
At any given time, the system receives
its position in relation to the satellites
detected and the time of transmission
of the signal.
This enables the telematic unit to
deduce its position and therefore that of
the vehicle.
A repositioning process using the
map database stored on the hard disc
permits repositioning of the vehicle’s
position on the road network in order
to improve the accuracy of the locating
function. What is a point of interest (POI)?
Up to 40 different icons may
be displayed (refer to the
section “Points of interest
icon”).
T h e y a r e c l a s s i fi e d i n
5 g r o u p s a n d i d e n t i fi e d b y o n e c o l o u r
for each group:
- S h o p s , fi n a n c e a n d b u s i n e s s e s (Green),
- Vehicles and travel (Dark blue),
- Restaurants (Orange),
- Public places and emergency services (Brown),
- Entertainment and attractions (Blue).
GPS
The system’s measurements may be
inaccurate if the vehicle is:
- in a tunnel or underground car park,
- underneath a two-level motorway,
- in an area with several very high buildings,
- surrounded by closely planted trees.
Depending on the vehicle’s situation and
the reception of the GPS information, the
displayed information may disappear
from the display temporarily. A point of interest (POI) is
represented by an icon on
the map, it represents an
airport, a station, a town
hall, ...
Page 180 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
177
Selecting points of interest (POI)
icons displayed on the map
You can select up to 40 types of point
of interest icon which are displayed on
your map screen.
Press the MENU button then
[Navigation/Settings].
Press [Screen] then [Select] on the POI
line.
Press [ ] which is displayed.
Press each POI required.
At each contact with a POI, the display-
ing of [ ] changes ( = the POI will be
displayed on the screen). General
Town centre
Locality
S h o p s , fi n a n c e a n d b u s i n e s s e s (Green)
Major companies
Shopping centre
Vehicles and travel (Dark blue)
CITROËN
Airport
Bus stop
Vehicle hire
Suburban station / station
Ferry terminal
Hotel
Park and ride
Car park (press +)
Service station
Rest area
Toll booth
Tourist information
Railway station Restaurant (Orange)
Night life / night club
Restaurant Public places and emergency
services (Brown)
Town Hall
Community centre
C o n v e n t i o n / e x h i b i t i o n c e n t r e
Hospital
University / college
Entertainment and attractions (Blue) Theme park
Bowling alley
Casino
Cinema
Golf course
Historical monument
Skating rink
Marina
Museum
Flying club
Leisure area
Ski station
Sports centre
Theatre / opera
Tourist attraction
Vineyard / wine and spirit store
Page 188 of 216
ABC
DE
F
GHI
J
K
L
M
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
185
Information displayed in CD mode and recording a CD
A. The name of the album is displayed
for the track currently being played.
B. The name of the artist is displayed for
the album currently being played.
C. The playing time of the track
currently being played is displayed.
D. The playing mode currently selected
is displayed.
E. Position of the cursor and total
number of tracks on the album.
F. Displays the item currently selected.
G. To scroll up or down through the
tracks. Press and hold for rewind or
fast forwards playing of a track.
H. Displays the number and the name
of the track. While driving, they
are not available and cannot be
selected.
I. To display the secondary menu.
J. Move the cursor onto the track
currently being played.
K. The number and the name of the
track currently being played are
displayed.
L. During recording, this symbol is
displayed in red and it switches off
when all recording operations are
complete. The number indicates the
percentage of the total number of
tracks on the CD already recorded
onto the hard disc. 00% when only
one track has been recorded.
M. The tracks which have not been
recorded are displayed in blue.
No symbol is displayed for tracks
which have been recorded.
The CD button is only active if the play-
er contains a CD.
Press Open to return the display to the
vertical position.
Page 204 of 216
DE
E1E2E3E4
D1D2
D3D4
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
201
Time and date, language, unit,
picture size
E - Choose the size of the DVD picture
for:
E1 - normal 4/3,
E 2 - e x t e n d s t h e p i c t u r e e v e n l y t o t h e r i g h t and to the left in wide screen mode,
E 3 - e x t e n d s t h e r i g h t a n d l e f t p a r t s o n l y
leaving the centre as it stands in wide
screen mode,
E4 - enlarges the picture in 4/3 format.The top and the bottom are outside the
frame.
D
- Choose the base settings of the
system for:
D1 - setting of the time by the RDS signal,
time zone, summer time,
D2 - the language (English, Français,
Deutsch, Nederlands, Portuguese,
Español, Svenska, Italiano, Dansk),
D3 - the units for calculation of the
distances (km or miles and °C or °F),
D4 - other settings such as:
- the voice guidance volume,
- the type of voice guidance voice (female or male),
- the volume of the operation bleeps (1 to 3 and 0=no bleep),
- the type of inputting keypad (alphabet or PC),
- the range of menu colours (red or blue),
- the displaying or not of the audio playing icons on the map screen,
- the reinitialisation of the vehicle sensor,
- the interruption or not of the display when the air conditioning is used.
Page 208 of 216
G
EFF1F2
F3F4
F5
F6
E1
E2
E3
G1G2
G3
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
205
F - Consult the air conditioning
conditions:
F1 - the fan speed indicator,
F2 - the air selection indicator,
F3 - the windscreen demisting indicator light,
F4 - the air conditioning indicator,
F5 - the rear screen demisting
indicator light,
F6 - the AUTO mode indicator.
E - Consult the environment
information:
E1 - the altitude,
E2 - the atmospheric pressure,
E3 - t h e e x t e r i o r t e m p e r a t u r e . T h e i c e
s y m b o l fl a s h e s i f t h e r e i s a r i s k
of ice.
G - Make and receive telephone
calls:
G1 - enter the telephone number,
G2 - delete a character,
G3 - make the call.
Refer to the hands-free telephone
section to connect your Bluetooth ®
mobile telephone.
Environment, air conditioning,
telephone
Page 209 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
206
HANDS-FREE TELEPHONE
What is the Bluetooth®
hands-free
telephone with voice recognition?
The system uses wireless
communication technology
referred to as Bluetooth ®
which allows you to make
hands-free telephone calls
in your vehicle via your
Bluetooth ®
compatible mobile
telephone.
It has a voice recognition function which
allows you to make telephone calls using
a microphone, located in the courtesy
light, and also by means of easy use
of the steering wheel controls or using
voice commands. Five languages are
available: English (by default), Spanish,
French, German and Italian.
SPEAK
Pressing activates the voice recognition (“Listening” is displayed).
During voice recognition, a brief press pauses this recognition.
A n e x t e n d e d p r e s s d e a c t i v a t e s t h e r e c o g n i t i o n .
A brief press will activate the recognition even if a telep hone call is progress. Decreasing of the audio volume.
PICK UP
Press to answer an incoming call.
If a second incoming call is received,
p r e s s t h i s b u t t o n t o p l a c e t h e fi r s t
call on hold and speak to the second
caller.
In this case, a brief press switches
between callers.
To establish a three-way conversation,
press the SPEAK button to switch
to voice recognition mode and say
“Incorporate the call”.
HANG UP
Press to reject an incoming call.
During a call, pressing ends this call.
General notes
Increasing of the audio volume.
Audio system on/off.
Page 212 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
209
Matching your Bluetooth®
telephone
The system can register up to 7 Blue-
tooth ®
compatible mobile telephones.
The telephone which has the
highest level of priority is matched
automatically.
It is absolutely essential that the vehicle
is parked in a safe place with the
handbrake applied.
1 - Press the SPEAK button. 7 - Say a 4-digit number which
will be recorded as the match-
ing code. 12 - After the audible signal,
allocate a name to the
telephone by saying the
name of your choice.
13 - The system says “Allocate an order of priority between 1 and 7. One is
the highest level of priority”.
If the system does not detect the
Bluetooth ®
compatible mobile
telephone, the matching process
stops accompanied by an audible
signal.
If you select a level of priority which
has already been allocated to
another telephone, the system asks
you if you wish to replace this level
of priority.
You can choose any 4-digit number.
Remember this matching code as
you must enter it in the telephone
in one of the following steps of the
matching procedure.
9 - The system says “Start the matching procedure on the telephone. Consult
the instructions in the telephone
manual”.
2 - S a y “ C o n fi g u r e ” .
3 - Say “Matching options”.
5 - Say “Match a telephone”. 8 - T h e s y s t e m c o n fi r m s t h e
validity of the number spoken,
answer “Yes”. Say “No” to
return to step 7.
10 - Consult your mobile telephone’s user manual
and enter the matching
code recorded in step 7
in the telephone.
11 - When it detects a Bluetooth ®
compatible mobile telephone, the
system says “Please say the name
of the telephone after the bleep”. 14 - Say a number between 1
and 7 to establish the level
of priority of the mobile
telephone.
1 5 - T h e s y s t e m s a y s a n d c o n fi r m s t h e
16 - Answer “Yes” or say “No” to return to step 13.
17 - The systems says “Matching complete” then
emits an audible signal
and deactivates the voice
recognition.
4 - The system says “Do you wish to match a telephone, delete a
telephone or obtain the list of
matched telephones?”.
6 - The systems says “Please say the 4 digits of a matching code”.