2009 CHEVROLET UPLANDER maintenance

[x] Cancel search: maintenance

Page 406 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual Sheet Metal Damage
If the vehicle is damaged and requires sheet metal
repair or replacement, make sure the body repair shop
applies anti-corrosion material to parts repaired or
replaced to restore cor

Page 415 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual Maintenance Schedule......................................6-2
Introduction...................................................6-2
Maintenance Requirements..............................6-2
Your Vehicle

Page 416 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual Maintenance Schedule
Introduction
Important: Keep engine oil at the proper level and
change as recommended.
Have you purchased the GM Protection Plan? The Plan
supplements the vehicle warranties. See

Page 417 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual Using the Maintenance Schedule
We want to help keep this vehicle in good working
condition. But we do not know exactly how you will
drive it. You might drive very short distances only
a few times a we

Page 418 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual The proper replacement parts, �uids, and lubricants to
use are listed inRecommended Fluids and Lubricants
on page 6-11andMaintenance Replacement Parts
on page 6-13. When the vehicle is serviced, make

Page 419 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual Scheduled Maintenance
Service MaintenanceIMaintenanceII
Change engine oil and �lter. SeeEngine Oil on page 5-15. Reset oil life system.
SeeEngine Oil Life System on page 5-18.An Emission Control Servi

Page 420 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual Additional Required Services
The following services should be performed at the �rst maintenance service (IorII) after the indicated miles
(kilometers) shown for each item.
Additional Required Services

Page 421 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual Maintenance Footnotes
#Lubricate the suspension, steering linkage, and the
underbody contact points and linkage.
(a)Visually inspect brake lines and hoses for proper
hook-up, binding, leaks, cracks, c