2009 CADILLAC ESCALADE ESV keyless entry

EXIT LIGHTING This feature allows you to select the amount of time
you want the exterior lamps to remain on when it is dark
enough outside. This happens after the key is turned
from ON/RUN to LOCK/OFF.
Press the customization button until EXIT LIGHTING
appears on the DIC display. Press the set/reset
button once to access the settings for this feature.
Then press the customization button to scroll through
the following settings:
OFF: The exterior lamps will not turn on.
30 SECONDS (default): The exterior lamps will stay on
for 30 seconds.
1 MINUTE: The exterior lamps will stay on for
one minute.
2 MINUTES: The exterior lamps will stay on for
two minutes.
NO CHANGE: No change will be made to this feature.
The current setting will remain.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC. APPROACH LIGHTING This feature allows you to select whether or not to
have the exterior lights turn on briey during low light
periods after unlocking the vehicle using the Remote
Keyless Entry (RKE) transmitter.
Press the customization button until APPROACH
LIGHTING appears on the DIC display. Press the
set/reset button once to access the settings for
this feature. Then press the customization button
to scroll through the following settings:
OFF: The exterior lights will not turn on when you
unlock the vehicle with the RKE transmitter.
ON (default): If it is dark enough outside, the exterior
lights will turn on briey when you unlock the vehicle
with the RKE transmitter.
The lights will remain on for 20 seconds or until the
lock button on the RKE transmitter is pressed, or
the vehicle is no longer off. See Remote Keyless
Entry (RKE) System Operation on page 2-5 for
more information.
NO CHANGE: No change will be made to this feature.
The current setting will remain.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.
3-69

To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.
EASY EXIT SETUP If your vehicle has this feature, it allows you to select
which areas will recall with the automatic easy exit
seat feature. It also allows you to turn off the automatic
easy exit feature. See Memory Features on page 1-7
and “EASY EXIT RECALL” earlier for more information.
Press the customization button until EASY EXIT SETUP
appears on the DIC display. Press the set/reset button
once to access the settings for this feature. Then press
the menu up/down button to scroll through the following
settings:
OFF: No automatic seat exit will recall.
SEAT ONLY: The driver’s seat will recall.
TILT ONLY: The steering wheel tilt feature will recall.
ALL (default): The driver’s seat and the steering wheel
tilt feature will recall.
NO CHANGE: No change will be made to this feature.
The current setting will remain.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC. MEMORY SEAT RECALL This feature allows you to select your preference for
the remote memory seat recall feature. See Memory
Features on page 1-7 for more information.
Press the customization button until MEMORY SEAT
RECALL appears on the DIC display. Press the set/
reset button once to access the settings for this feature.
Then press the customization button to scroll through the
following settings:
OFF (default): No remote memory seat recall will
occur.
ON: The driver’s seat, and on some vehicles, the
outside mirrors will automatically move to the stored
driving position when the unlock button on the Remote
Keyless Entry (RKE) transmitter is pressed. On some
vehicles with the adjustable throttle and brake pedal
feature, the pedals will also automatically move.
See “Relearn Remote Key” under DIC Operation and
Displays on page 3-48 for more information on matching
transmitters to driver ID numbers.
NO CHANGE: No change will be made to this feature.
The current setting will remain.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.
3-72

REMOTE START If your vehicle has this feature, it allows you to turn the
remote start off or on. The remote start feature allows you
to start the engine from outside of the vehicle using the
Remote Keyless Entry (RKE) transmitter. See Remote
Vehicle Start on page 2-8 for more information.
Press the customization button until REMOTE START
appears on the DIC display. Press the set/reset button
once to access the settings for this feature. Then press
the customization button to scroll through the following
settings:
OFF: The remote start feature will be disabled.
ON (default): The remote start feature will be enabled.
NO CHANGE: No change will be made to this
feature. The current setting will remain.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC. DISPLAY DIGITAL SPEED This feature allows you to enable or disable the digital
speedometer on the DIC.
Press the customization button until DISPLAY DIGITAL
SPEED appears on the DIC display. Press the set/reset
button once to access the settings for this feature.
Then press the customization button to scroll through
the following settings:
OFF: The digital speedometer will be disabled.
ON (default): The digital speedometer will be enabled.
NO CHANGE: No change will be made to this
feature. The current setting will remain.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.
3-73

You have two minutes to match the rst tire/wheel
position, and ve minutes overall to match all four
tire/wheel positions. If it takes longer than two minutes, to
match the rst tire and wheel, or more than ve minutes
to match all four tire and wheel positions the matching
process stops and you need to start over.
The TPMS sensor matching process is outlined below:
1. Set the parking brake.
2. Turn the ignition switch to ON/RUN with the
engine off.
3. Press the Remote Keyless Entry (RKE) transmitter’s
LOCK and UNLOCK buttons at the same time for
approximately ve seconds. The horn sounds
twice to signal the receiver is in relearn mode
and TIRE LEARNING ACTIVE message displays
on the DIC screen.
4. Start with the driver side front tire. 5. Remove the valve cap from the valve cap stem.
Activate the TPMS sensor by increasing or
decreasing the tire’s air pressure for ve seconds,
or until a horn chirp sounds. The horn chirp,
which may take up to 30 seconds to sound,
conrms that the sensor identication code has
been matched to this tire and wheel position.
6. Proceed to the passenger side front tire, and repeat
the procedure in Step 5.
7. Proceed to the passenger side rear tire, and repeat
the procedure in Step 5.
8. Proceed to the driver side rear tire, and repeat the
procedure in Step 5. The horn sounds two times to
indicate the sensor identication code has been
matched to the driver side rear tire, and the TPMS
sensor matching process is no longer active. The
TIRE LEARNING ACTIVE message on the DIC
display screen goes off.
9. Turn the ignition switch to LOCK/OFF.
10. Set all four tires to the recommended air pressure
level as indicated on the Tire and Loading
Information label.
11. Put the valve caps back on the valve stems.
6-68

Fuses Usage
21 Power Door Lock 1 (Lock Feature)
22 Driver Information Center (DIC)
23 Rear Wiper
24 Cooled Seats
25 Driver Seat Module, Remote
Keyless Entry System
26 Driver Power Door Lock
(Unlock Feature)
Circuit Breaker Usage
LT DR Driver Side Power Window Circuit
Breaker
Harness
Connector Usage
LT DR Driver Door Harness Connection
BODY Harness Connector
BODY Harness Connector Center Instrument Panel Fuse Block The center instrument panel fuse block is located
underneath the instrument panel, to the left of the
steering column.
Top View
Harness
Connector Usage
BODY 2 Body Harness Connector 2
BODY 1 Body Harness Connector 1
BODY 3 Body Harness Connector 3
6-108

Hood
Checking Things Under ................................ 6-12
Release ..................................................... 6-13
Horn ............................................................... 3-6
How to Wear Safety Belts Properly ................... 1-35
IIgnition Positions ............................................. 2-25
Infants and Young Children, Restraints ............... 1-55
Ination - Tire Pressure ................................... 6-62
Instrument Panel
Brightness .................................................. 3-23
Cluster ....................................................... 3-34
Overview ..................................................... 3-4
Introduction ...................................................... 7-2
JJump Starting ................................................. 6-40
KKeyless Entry System ....................................... 2-4
Keys ............................................................... 2-3 L Labeling, Tire Sidewall ..................................... 6-57
Lamps
Back-Up ..................................................... 6-51
Daytime Running (DRL) ................................ 3-21
Dome ........................................................ 3-23
Dome Lamp Override ................................... 3-23
License Plate .............................................. 6-53
Malfunction Indicator .................................... 3-42
Reading ..................................................... 3-24
Lap Belt ........................................................ 1-50
Lap-Shoulder Belt ........................................... 1-43
LATCH System for Child Restraints ................... 1-63
LED Lighting .................................................. 6-51
Level Control .................................................. 5-43
Liftgate, Power ............................................... 2-14
Liftgate/Liftglass .............................................. 2-12
Liftglass/Liftgate .............................................. 2-12
Lighting
Entry ......................................................... 3-23
Exit ........................................................... 3-23
LED .......................................................... 6-51
Lights
Airbag Readiness ........................................ 3-36
Antilock Brake System (ABS) Warning ............ 3-40
Brake System Warning ................................. 3-39
Charging System ......................................... 3-38
Cruise Control ............................................. 3-46
Exterior Lamps ............................................ 3-16
8

Rearview Mirrors (cont.)
Reclining Seatbacks, Power ............................... 1-8
Recommended Fluids and Lubricants ................. 7-13
Recovery Hooks ............................................. 5-32
Recreational Vehicle Towing ............................. 5-40
Reimbursement Program, GM Mobility ................. 8-7
Remote Keyless Entry (RKE) System .................. 2-4
Remote Vehicle Start ........................................ 2-8
Removing the Flat Tire and Installing the
Spare Tire .................................................. 6-84
Removing the Spare Tire and Tools ................... 6-79
Replacement Bulbs ......................................... 6-53
Replacement Parts
Maintenance ............................................... 7-15
Reporting Safety Defects
General Motors ........................................... 8-15
U.S. Government ......................................... 8-14
Restraint System Check
Checking the Restraint Systems .................... 1-95
Replacing Restraint System Parts After a
Crash ..................................................... 1-96
Retained Accessory Power (RAP) ...................... 2-26
Ride Control Systems
Road Sensing Suspension .............................. 5-9
Road Sensing Suspension ................................. 5-9
Roadside Service ............................................. 8-7 Rocking Your Vehicle to Get it Out .................... 5-32
Roof
Sunroof ...................................................... 2-65
Running the Vehicle While Parked ..................... 2-39
S Safety Belts
Care of .................................................... 6-100
Extender .................................................... 1-51
How to Wear Safety Belts Properly ................ 1-35
Lap Belt ..................................................... 1-50
Lap-Shoulder Belt ........................................ 1-43
Reminders .................................................. 3-35
Safety Belts Are for Everyone ....................... 1-30
Use During Pregnancy ................................. 1-50
Safety Defects Reporting
General Motors ........................................... 8-15
U.S. Government ......................................... 8-14
Safety Warnings and Symbols .............................. iv
Scheduled Maintenance ..................................... 7-4
Additional Required Services ........................... 7-6
Scheduling Appointments ................................. 8-10
Seats
60/40 Split Bench Seat ................................. 1-11
Bucket Seats, Rear ...................................... 1-17
Center Seat ................................................ 1-10
12