Getting to Know Your Enclave6
Seat Adjustments
Power Seat Adjustment
Use the horizontal control (A) on the
outboard side of the seat cushion to
move the seat forward/rearward and —
on the driver’s seat only — up/down,
as well as raise/lower the front or rear
of the seat cushion.
Power Seatback Recline Adjustment
(if equipped)
Use the vertical control (B) on the
outboard side of the seat cushion to
recline/raise the seatback.
Power Lumbar Support Adjustment
(if equipped)
Use the control pad (C) on the outboard
side of the seat cushion to increase/
decrease lumbar support.
Manual Seatback Recline Adjustment
Lift the lever located on the outboard
side of the seatback and move the seat-
back to the desired position; then
release the lever.
OnStar®
Your vehicle features the uplevel OnStar
Directions & Connections Plan with one
year of OnStar service from the date
you purchased your new vehicle. With
the help of OnStar Advisors, who are
available 24 hours a day, 7 days a
week, OnStar offers a wide variety of
safety and driver assistance capabilities,
including:
• Driving Directions and Turn-by-Turn
Navigation
• OnStar Vehicle Diagnostic email
• Automatic Notification of Airbag
Deployment
• Emergency Services
• Remote Door Unlock
• Stolen Vehicle Location Assistance
• Information & Connections services
For more information, refer to
your OnStar Owner’s Guide, call
1-888-4-ONSTAR (1-888-466-7827),
or visit onstar.com.
See Section 2 of your Owner Manual.
Child Restraints (LATCH)
Your vehicle is equipped with LATCH
anchors, and may have top tethers for
use with a LATCH-compatible child
restraint. The LATCH anchors are locat-
ed in the 2nd-row outboard seating posi-
tions. If your child restraint is not com-
patible with the LATCH system, you may
still use it by installing the child restraint
with the safety belt system. Choose a
child seat that is appropriate for the
child’s age and size (weight and height).
See Section 1 of your Owner Manual.
COMFORT
C B A
Entering or Exiting the 3rd-Row Seats
The 2nd-row SmartSlide
™seats allow for
easy access to the 3rd-row seats. To
enter or exit the 3rd-row seats:
1. Make sure nothing is on the 2nd-row
seat or the floor in front of the seat.
2. Before sliding the 60/40 split bench
seat, fold the center armrest into the
upright position in the seatback.
Manual Lumbar Support Adjustment
To adjust the amount of lumbar support,
use the lever located on the inboard
side of the seatback. To increase
support, ratchet the lever up repeatedly.
To decrease support, ratchet the lever
down repeatedly.
See Section 1 of your Owner Manual.
7
2nd-Row Seats
3. Pull forward
the release
lever located
on the upper
outboard
side of the
seatback.
4. Push the top
of the seat-
back forward. The seat cushion will
fold up automatically and the entire
seat will slide forward.
To return the 2nd-row seat to the seating
position:
1. Make sure nothing is on the floor
behind the 2nd-row seat.
2. Push the top of the seatback rear-
ward until the seatback and floor
tracks lock.
3. Push down at the rear of the seat
cushion to lock it in place.
4. Pull on the seatback to make sure it
is locked in place.
Sliding the Seats
To slide the 2nd-row seats for more leg
room in the 2nd or 3rd row:
1. Make sure nothing is on the floor in
front or behind the 2nd-row seat.
2. Pull outward
on the han-
dle located
on the out-
board side
of the seat
cushion and slide the seat forward
or rearward.
3. Release the handle.
4. Pull on the seat to make sure it is
locked in place.
