
Navigation
Entertainment
Driving tips
 209Reference
At a glance
Controls
Communications
Mobility
>"Tone":
>"Treble / Bass" and "Balance": 
Separately adjustable for the left and 
right-hand headphones and the infrared 
headphones.
> "Reset":
The settings are reset to the default 
value.
> "DVD format":
>"Standard"
> "Zoom": full-screen playback
> "Language": 
Language or sound track of DVD playback. 
The language advances one setting each 
time the menu item is selected.
> "Subtitles": 
Language of subtitles
"00 n/a": no subtitles.
> "Title": 
Selection of a single track of the DVD.
> "Angle of view": 
Camera angle
Notes or symbols that appear during the 
playback of a film generally point out differ-
ent camera angles. These are usually only 
briefly available.
> "Menu":
Call up the DVD-specific menu.
> "Return":
Exit menu or:
Press the  buttons on the remote con-
trol.
Many DVDs offer dialogs and subtitles in vari-
ous languages or scene descriptions for the 
hearing impaired. These functions are stored 
on the DVD. With some DVDs, it is  only possible to 
select language, subtit les, camera angle, 
or title by using the DVD-specific menu.
Refer to the information on your DVD for possi-
ble selections.
Entries marked in gray  in the menus cannot be 
selected. 
For example, it is possible to select from several 
possible plots or display information on the film.
1. Press the  button on the remote con-
trol during playback.
2. Select "Menu".
3. Press the  button.
On some DVDs, selecting "Menu" 
and "Title" gives you the option of 
choosing from additional menus. <
To make a selection:
1. Use the buttons on the remote control to 
select the desired func tion in the DVD-spe-
cific menu.
2. Press the  button.
You can also select  language, subtitles, 
camera angle, or title in the DVD-specific 
menu.
Observe the information on your DVD. <
Compressed video files
Playback
1.Select the direct ory if necessary.
2. Press the  button. 

Navigation
Entertainment
Driving tips
 211Reference
At a glance
Controls
Communications
Mobility
Selecting a track
Buttons on CD/DVD player
Press the  button for the corresponding 
direction repeatedly until you reach the desired 
track.
Playback begins at the start of the track.
Via the remote control
Press the  button for the corresponding 
direction repeatedly or turn the serrated dial 
until you reach the desired track.
Playback begins at the start of the track.
Settings and playback functions for 
audio CDs/DVDs
1. Select "SET".
2. Press the  button.
3. Make the settings with  the remote control:
> "Tone":
>"Treble / Bass" and "Balance": 
Separately adjustable for the left and 
right-hand headphones and the infrared 
headphones. >
"Reset":
The settings are reset to the default 
value.
> "Pause": 
Stop and continue playback.
> "Random": 
In this mode, the trac ks on the CD/DVD are 
played once in a random sequence.
> "Scan":
Automatically briefly samp le all tracks of the 
CD/DVD consecutively.
> "Repeat": 
Repeat the current track. Select again to 
end.
Fast forward/reverse
Buttons on the CD/DVD player:
Press and hold the  button for the corre-
sponding direction.
Remote control:
Press and hold the  button until you reach 
the desired point.
Compressed audio files
With some CDs/DVDs playback may automati-
cally start with the first track.
Playback
1.Select the direct ory if necessary.
2. Press the  button. 

DVD system in rear
212
3.
Select a track.
4. Press the  button.
To change the directory:
1. Select the directory.
2. Press the  button.
Settings and playback functions for 
compressed audio files
1.Select a track.
2. Press the  button.
3. Make the settings with  the remote control: >
"Tone":
>"Treble / Bass" and "Balance":
Separately adjustable  for the left and 
right-hand headphones and the infrared 
headphones.
> "Reset":
The settings are reset to the default 
value.
> "Pause": 
Stop or continue playback.
> "Scan directory": 
Briefly sample the tracks in the current 
directory.
> "Scan all": 
Briefly sample all tracks.
> "Random directory": 
Play the tracks in the  current directory in a 
random sequence.
> "Random all": 
Play all tracks in  a random sequence.
> "Repeat track": 
Repeat the selected track.
> "Repeat directory": 
Repeat the tracks in  the current directory.
> "Details":
Display any stored information on the cur-
rent track.
Displaying images from 
CD/DVD
1.Push the CD/DVD into the drive with the 
labeled side facing upward. 
The CD/DVD is auto matically pulled in.
2. Open the start menu with the remote con-
trol.
3. Select "Photo".
4. Press the  button. 

DVD system in rear
216
Settings for external devices
1.Press the  button during playback.
2. Make the settings with  the remote control:
> "Video settings":
>"Brightness", "Color" and "Contrast" of 
video playback.
> "NTSC color": 
The color can be adjusted on an external 
device with the NTSC standard.
> "Standard":
The DVD system in the rear can be 
adapted to external devices with various 
TV standards. When doing so, also refer 
to the operating manual of the external 
device.
> "Reset":
The settings are reset to the default 
value.
> "Tone":
>"Treble / Bass" and "Balance" can be 
adjusted for the left and right-hand 
headphones and the infrared head-
phones.
> "Reset":
Your settings are reset.
> Additional settings  can be made after 
changing to the top field.
"Audio": adjust the volume of the exter-
nal device to the vo lume of the CD/DVD 
player.
"Language": system language of the 
DVD system in the rear.
"Display": backgrou nd brightness of 
screen. >
"Video Format":
>"Standard"
> "Zoom": full-screen playback 

 221
Entertainment
Reference
At a glance
Controls
Driving tips
Communications
Navigation
Mobility
It may not be possible  to establish a telephone 
connection using the mobile phone while a con-
nection is being estab lished to BMW Assist or 
while a call to BMW Assist is already in 
progress. If this happens, you must log off the 
mobile phone from the vehicle if you wish to 
place a call with the mobile phone.
Commissioning
Pairing mobile phone in vehicle
The following prerequisites must be met:
> Suitable mobile phone: the mobile phone is 
supported by the full  mobile phone prepara-
tion package. Information on this subject is 
also provided on the Internet at: 
www.bmw.com
> The mobile phone is ready to operate.
> The Bluetooth link on th e vehicle, refer to 
page 225, and on the mobile phone is 
active.
> Depending on the mobile phone, it may be 
necessary to adjust the presets of the 
mobile phone, e.g. via the following menu 
items:
>Bluetooth activated
> Connection not with confirmation
> Reconnect
> Depending on the mobile phone model, the 
setting energy saving mode can, for exam-
ple, result in vehicle failing to detect the 
paired mobile phone.
> For pairing, specify any desired number as 
the Bluetooth passkey, e.g. 1. This Blue-
tooth passkey is no longer required follow-
ing successful pairing.
> The ignition is switched on.
Only pair the mobile phone with the vehi-
cle stationary, otherwise the passengers 
and other road users can be endangered due to 
a lack of attentiveness on the part of the 
driver. <
Switching on ignition
1.Insert the remote control as far as possible 
into the ignition lock.
2. Switch on the ignition by pressing the Start/
Stop button without depressing the brake 
pedal.
Preparation via iDrive
iDrive, for operating pr inciple refer to page16.
3. Press the  button to open the start 
menu.
4. Press the controller to open the  menu.
5. Select "Settings" and press the controller.
6. Select "Bluetooth" an d press the controller. 

Mobility
 249Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Wheels and tires
Tire inflation pressure
Information for your safety
The condition of the tires and the maintenance 
of the specified tire pres sure are crucial not only 
to the tire's service life, but also to driving com-
fort and most importantly, driving safety.
Checking pressure
Only check tire inflation  pressure when the tires 
are cold. This means after a maximum of 
1.25 miles/2 km driving or when the vehicle has 
been parked for at least 2 hours. When tires are 
warm, the tire inflation pressure increases.
Check the tire inflation pressure regularly 
and correct it as needed, even on the 
compact tire
*: at least twice a month and before 
starting long trips. If you fail to observe this pre-
caution, you may be driving on tires with incor-
rect tire pressures, a condition that can not only 
compromise your vehicle's driving stability, but 
also lead to tire damage and the risk of an acci-
dent. Do not drive with de pressurized, i.e. flat 
tires, except run-flat tires. A flat tire will seri-
ously impair your vehicle's handling and braking 
response. Attempts to dr ive on a flat tire can 
lead to a loss of control over the vehicle. <
After correcting the tire inflation pressure, 
reinitialize the Flat Tire Monitor, refer to 
page 100, or reset the Tire Pressure Monitor, 
refer to page 102.<
Pressure specifications
The tables below provide all the correct inflation 
pressures for the specified tire sizes at ambient 
temperature.
The inflation pressures apply to the 
tire sizes and tire brands respectively 
approved and recommended by BMW; a list 
of these is available from your BMW Sports 
Activity Vehicle Center. <
For correct identification of the right tire infla-
tion pressure for your  tires, observe the follow-
ing:
> Tire sizes of your vehicle
> Load conditions
> Maximum allowable driving speed
Tire inflation pre ssures for speeds 
up to 100 mph/160 km/h
For normal driving up to 100 mph/160 km/h, 
adjust pressures to the re spective tire inflation 
pressures listed on the  following pages in the 
column Traveling speeds up to max. of 
100 mph/160 km/h to achieve optimum driving 
comfort.
These pressure specifications can be found on 
the door post when you open the driver's door.
The permissible top speed for these tire 
inflation pressures is 100 mph/160 km/h. 
Do not exceed this speed, otherwise tire dam-
age and accidents may result. < 

Mobility
 277Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
2.Guide the jack head into the rectangular 
recess of the jacking point when cranking 
up, refer to illustration detail.
3. Jack the vehicle up until the wheel you are 
changing is raised from the ground.
Mounting a wheel
1.Unscrew the lug bolts and remove the 
wheel.
2. Remove accumulations of mud or dirt from 
the mounting surfaces  of the wheel and 
hub. Also clean the lug bolts.
3. Position the new wheel or compact wheel. 
Secure the wheel by sc rewing at least two 
lug bolts into opposite bolt holes.
When you mount wheels other than Genu-
ine BMW light-alloy wheels, different lug 
bolts may also be required.
4. Screw in the remaining  lug bolts. Tighten all 
the bolts securely in a diagonal pattern.
5. Lower the vehicle and remove the jack from 
beneath the vehicle.
After mounting
1.Tighten the lug bolts in a diagonal pattern.
To ensure safety,  always have the 
lug bolts checked with a calibrated 
torque wrench as soon as possible to 
ensure that they are  tightened to the speci-
fied torque. Otherwis e, incorrectly tight-
ened lug bolts are a hidden safety risk. The 
tightening torque is 101 lb ft/140 Nm. <
2. Stow the defective wheel in the cargo bay.
The defective wheel cannot be stored 
under the floor panel flap due to its 
size. < 3.
Check and correct the ti re inflation pressure 
at the earliest opportunity.
Protect valve stems  with valve screw 
caps against dirt and contamination. 
Dirt in valve stems is a frequent source of 
gradual air loss. <
4. Initialize the Flat Tire Monitor, refer to 
page 100, or reset the Tire Pressure Moni-
tor, refer to page 102.
5. Replace the damaged tire  as soon as possi-
ble and have the new wheel/tire balanced.
Driving with compact wheel
Drive reservedly and do not exceed a 
speed of 50 mph/80 km/h. Otherwise, 
changes in the driving characteristics could 
result, for example reduced track stability on 
braking, extended brakin g distance, and altered 
self-steering characterist ics in the limit range. 
In conjunction with wint er tires, these charac-
teristics are more pronounced. <
Only one compact wheel may be 
mounted. Restore the wheels and tires to 
their original size as quickly as possible. Failure 
to do so is a safety risk. <
Vehicle battery
Battery care
The battery is 100 % main tenance-free, i.e., the 
electrolyte will last for  the life of the battery 
when the vehicle is operated in a temperate cli-
mate. Your BMW Sports Activity Vehicle Center 
will be glad to advise in  all matters concerning 
the battery.
Charging battery
Only charge the battery  in the vehicle via the 
terminals in the engine compartment with the 
engine switched off. Connections, refer to 
Jump starting on page 280.
Disposal
Have old batteries disposed of following 
replacement at your BMW Sports Activity  

Reference 293
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Entertainment
FunctionCommand
Tone control175 {Audio }
To switch on radio 178 {Radio on },
{ FM } or
{ AM }
To open "FM" 178 {FM menu }
To open "AM" 178 {AM menu }
To open "All stations" 178 {FM All stations }
To select radio station 178 {Station ... }, e.g. {Station WNYC } or
{ Choose station }
To open "Presets" 178 {FM presets } or
{ AM presets }
To select stored radio station 178{Preset ... }, e.g. {Preset 1 }
To open "Manual" 179 {FM manual },
{ AM manual } or
{ Choose frequency }, 
{ Frequency ... Megahertz }
To open strongest radio stations 179{AM Autostore }
To open "WB" 183 {Weatherband menu }
To switch on weatherband  183{Weatherband on }
To select a weatherband station 183{Choose weatherband station }
To open "SAT" 184 {SAT radio 
 menu}
To switch on satellite radio 184{SAT radio }
To open "Presets" of satellite radio 185{SAT radio presets }
To open "All channels" of satellite radio 185{SAT radio all channels }
To open "Categories" of satellite radio 185{SAT radio categories }
To open CD player 187 {CD menu }
To switch on CD player 187 {CD }
To open CD changer 187 {CD-changer menu }
To switch on CD changer 187{CD-changer }
To select CD 187 {CD 1...6 }
To select music track 188 {CD track ... }
To select CD and music track 188{CD 1...6 track ... }
To switch on audio playback with external audio 
device 200 {
Audio Aux }