
 185
Entertainment
Reference
At a glance
Controls
Driving tips
Communications
Navigation
Mobility
Settings
Suppressing cookies
1. Open "Options".
2. "Suppress cookies"
Suppressing pop-ups
1.Open "Options".
2. "Suppress pop-ups"
Suppressing safety warnings
1.Open "Options".
2. "Block HTTPS pop-ups"
Activating TeleService*
If the services are not displayed, they may need 
to be activated.
1."BMW Assist"
2. "Activate TeleService"
Customer Relations
Contact Customer Relations for information on 
all aspects of your vehicle.
Vehicle equipped with BMW Assist or 
TeleService
1."BMW Assist"
2. "Customer Relations"
3. "Start service"
A voice connection is established to Customer 
Relations.
Vehicle not equipped with BMW Assist 
or TeleService
1. "BMW Assist"
2. "Customer Relations"
The Customer Relations phone number is dis-
played. If the vehicle is equipped with BMW  Assist or the mobile phone preparation pack-
age, a voice connection is established.
Service Request*
You can send a request to your BMW center to 
arrange a service appointment. The TeleSer-
vice data is transmitted during a Service 
Request. Your BMW center will contact you.
Starting a Service Request
1.
"BMW Assist"
2. "Service Request"
3. "Start service"
Automatic Service Request*
The TeleService data ne cessary for servicing 
the vehicle are automatically sent to your BMW 
center prior to the service deadline. The center 
will contact you and a service appointment can 
be arranged.
You can check when the BMW center was noti-
fied.
ba8_E9091_cic.book  Seite 185  Mittwoch, 29. Oktober 2008  2:59 14 

Refueling
192
If you refueled with the wrong fuel, contact your 
BMW center.
The filler neck is desi gned for refueling at 
diesel fuel pumps.
If the filler nozzle cannot be inserted into your 
BMW's filler pipe, please  ensure that you are re-
fueling at a diesel fuel pump and that it is 
equipped with a diesel filler nozzle. <
Winter diesel
To ensure that the diesel engine remains oper-
ational in the winter, please use winter diesel, 
which is available at gas stations during winter 
months. The fuel filter heating system, included 
as a standard feature, prevents disruption of the 
fuel supply while driving.
Do not add additives, including gasoline; 
otherwise, engine damage may occur. <
BMW Advanced Diesel
The concept
BMW Advanced Diesel reduces nitrogen oxide 
in the diesel emissions of your vehicle by means 
of a mechanism that injects diesel exhaust fluid, 
a reduction agent, into the exhaust tract. A 
chemical reaction occurs in the catalytic con-
verter that minimizes the nitrogen oxide con-
tent.
To be able to start the engine as usual, a suffi-
cient amount of diesel exhaust fluid must be 
present in a separate reservoir.
Warming the system
To warm the system to its operating tempera-
ture after starting with  a cold engine, the auto-
matic transmission delays shifting to the next 
higher gear, if necessary.
Reserve display
A display in the instrument cluster informs you 
about the remaining distance you can drive with 
the fluid remaining in the reservoir.
-
The reserve display appears beginning at ap-
prox. 1,000 miles/1,600 km before the supply is 
used up.
When this reserve display appears in the 
instrument cluster, have diesel exhaust 
fluid refilled to avoid not being able to start the 
engine. <
Diesel exhaust fluid at the minimum 
level
Even if the display indicates -- mls, the engine 
continues running if it is not switched off and if 
all other requirements cont inue to be met, e.g. a 
sufficient supply of fuel.
Do not drive to the end of the indicated 
distance. Otherwise, it will not be possible 
to start the engine again after switching it off. <
Wrong fluid
A warning lamp lights up:
The wrong fluid was filled into the res-
ervoir.
Please contact your BMW center.
ba8_E9091_cic.book  Seite 192  Mittwoch, 29. Oktober 2008  2:59 14 

Mobility
 193Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Having diesel exhaust fluid refilled
Diesel exhaust fluid is refilled by your BMW 
center during regular service. If the service in-
tervals are adhered to, it generally does not 
need to be refilled between service appoint-
ments.
Under certain conditions , e.g. especially fre-
quent accelerations or operation of the vehicle 
at high altitudes, it  may become necessary to 
refill the fluid between  service appointments.
When this reserve display appears in the instru-
ment cluster, have diesel exhaust fluid refilled to 
avoid not being able to start the engine.
You can have the fluid refilled by a BMW center.
Diesel exhaust fluid at low 
temperatures
Because of its physical properties, it may 
be necessary to refill diesel exhaust fluid 
between regular  service appointments at tem-
peratures below +23 7/-5 6.
The need to add fluid is indicated by the reserve 
display in the instrume nt cluster, refer to 
page 192.<
Refilling diesel exhaust fluid in 
exceptional cases
To be able to reach the next BMW center, you 
can refill diesel exhaust fluid yourself while ad-
hering to the following warnings.
Do not come into cont act with diesel ex-
haust fluid as it can lead  to skin or eye irri-
tations. Wear goggles an d gloves, if necessary. 
Follow the safety instructions on the bottle.
Vapors with a sharp odor can escape from the 
bottle or container when it is opened. Before re-
filling, completely close the windows and doors 
of the vehicle to prevent the vapors from intrud-
ing into the interior. If handling diesel exhaust 
fluid in an enclosed area, ensure that the room 
is well ventilated.
After handling diesel exhaust fluid, wash your 
hands thoroughly; othe rwise, inadvertently 
touching your eyes, for example, may lead to 
eye irritations.
If eye irritations occur, rinse the eyes thoroughly 
with water and consult a physician if necessary. If diesel exhaust fluid comes into contact with 
the surface of your vehicle, rinse the affected 
areas with water to pr
event surface damage.
Keep diesel exhaust fluid away from children. <
Suitable diesel exhaust fluid
>Preferred: BMW Diesel Exhaust Fluid.
Diesel exhaust fluid can be refilled conve-
niently with this bottle and its special 
adapter.
> Alternatively: NOx reduction agent AUS 32
You can obtain diesel exhaust fluid from your 
BMW center.
Refilling quantity
Refilling quantity when th e reserve display first 
appears:
Approx. 1 US gallon/3.7 liters
Opening the diesel exhaust fluid 
reservoir
1. Remove the cover in the bumper by press-
ing on it, see arrow.
2. Place the handle of the screwdriver from the 
onboard tool kit, page 222, onto the bottom 
cap and open the cap, arrow.
ba8_E9091_cic.book  Seite 193  Mittwoch, 29. Oktober 2008  2:59 14 

Under the hood
214
1.
"Vehicle Info"
2. "Vehicle status"
3. "Engine oil level"
Possible messages
>"Engine oil level OK."
> "Measurement not possible at this time."
> "Measuring engine oil level...":
This can take about 3 min utes if the car is at 
a standstill on a level surface and the engine 
is running, and about 5 minutes while the 
car is moving.
If engine oil was added,  it may take up to 
30 minutes to obtain  an oil level reading.
> "Engine oil level below minimum. Add 1 
quart!"
Add engine oil as soon  as possible, but no 
more than 1 US quart/1 liter, refer also to 
Adding engine oil below.
If the oil level is below the minimum value, 
add engine oil immediately to avoid engine 
damage.
> "Engine oil level too high! Have this 
checked."
Too much oil will  harm the engine. 
Have the vehicle checked without de-
lay. < >
"Measurement inactive. Have this 
checked."
Do not add engine oil. You can continue 
your journey. Note the newly calculated dis-
tance remaining to the ne xt oil service, refer 
to page 71. Have the system checked as 
soon as possible.
Adding engine oil
Add a maximum of 1 US quart/1 liter of engine 
oil no earlier than wh en a corresponding mes-
sage appears on the Control Display or, if the 
car has a diesel engine, when the oil level has 
dropped to just above the lower marking on the 
dipstick, refer to page 212.
Add oil within the next 125 miles/200 km, 
otherwise the engine could be dam-
aged.<
Keep oils, greases, etc. out of the reach of 
children and comply with the relevant 
warnings on the containers. Otherwise, health 
hazards may result. <
Oil change
Have oil changed only at your BMW center or at 
a workshop that works according to BMW re-
pair procedures with  correspondingly trained 
personnel.
Specified engine oils
The quality of the engine  oil selected has critical 
significance for the oper ation and service life of 
an engine. BMW continuously approves spe-
cific oils after testing them extensively.
Your BMW center will be glad to answer 
any questions regarding the approved 
oils. <
ba8_E9091_cic.book  Seite 214  Mittwoch, 29. Oktober 2008  2:59 14 

Mobility
 217Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Socket for On-Board 
Diagnosis OBD
Primary components that make up exhaust 
emissions can be checked by a device via the 
OBD socket.
This socket is located on the driver's side to the 
left, on the bottom of the instrument panel 
underneath a cover.
Exhaust emission values
The warning lamp lights up:
The exhaust emission values have 
worsened. Have the car checked as 
soon as possible.
Canadian models display this warning 
lamp.
The lamp flashes under certain conditions. This 
indicates excessive misfir ing in the engine. If 
this happens, you should reduce your speed 
and visit your nearest BMW center as soon as 
possible. Severe engine misfiring can quickly 
lead to serious damage  of emissions-related 
components, especially  the catalytic converter.
The warning lamp comes on if the gas 
cap is not properly tightened and the 
OBD system assumes that fuel vapor 
is escaping. If the gas ca p is then tightened, the 
warning lamp should go  out within a few days.
Event data recorders
Your vehicle may be equipped with one or sev-
eral measuring or diagnostic modules or a 
device for recording or sending certain vehicle 
data or information. In addition, if you have 
signed a service contract for BMW Assist, cer- tain vehicle data ma
y be transmitted or 
recorded in order to fa cilitate the corresponding 
services.
ba8_E9091_cic.book  Seite 217  Mittwoch, 29. Oktober 2008  2:59 14 

Care
218
Care
Care products
Regular cleaning and care contributes signifi-
cantly to the value retention of your BMW.
BMW recommends cleaning and caring for your 
vehicle with products that are approved by 
BMW for this purpose.
Your BMW center will be  happy to advise you on 
the products and services available for cleaning 
and caring for your BMW.
Original BMW CareProducts have been 
material tested, labo ratory checked and 
proven in the field, and offer optimal care and 
protection for your vehicle. <
Do not use cleaners that contain alcohol 
or solvents as these may result in dam-
age.<
Cleaning agents can contain substances 
that are dangerous or hazardous to your 
health. Therefore, follow the warning and safety 
instructions on the packaging. When cleaning 
inside the vehicle, always open the doors or 
windows of the vehicle. In enclosed areas, pro-
vide for sufficient ventilation. Only use products 
designed for cleaning vehicles. <
Exterior care
Washing the vehicle
Especially during the winter months, 
ensure that the vehicle is washed more 
frequently. Heavy soiling and road salt can lead 
to vehicle damage. <
After washing the vehicle, apply the 
brakes briefly to dry them, otherwise 
water can reduce braking efficiency over the 
short term and the brake discs can corrode. <
Automatic car washes
Preference should be given to cloth car washes.
Before driving into a car wash, ensure that it is 
suitable for your BMW. Check the following: >
Dimensions of your vehicle, refer to 
page 239
> If necessary: fold in the exterior mirrors, 
refer to page 47
> Maximum permissible tire width
Preparations before driv ing into an automatic 
car wash:
> Unscrew the rod antenna
*.
> Deactivate the rain sensor
* to prevent unin-
tentional wiping.
> Sports Wagon: deactivate the rear window 
wiper and protect it against damage. If nec-
essary, ask the operator of the car wash 
about protective measures you should take.
> Remove additional attachments, e.g. 
spoiler or telephone an tennas, if there is a 
possibility that they could be damaged.
Automatic transmission
Before driving into an  automatic car wash, per-
form the following steps to  ensure that the vehi-
cle can roll:
1. Insert the remote cont rol, even with conve-
nient access, into the ignition lock.
2. Move the selector lever to position N.
3. Release the parking brake.
4. Switch off the engine.
5. Leave the remote control  in the ignition lock 
so that the vehicle can roll.
Steam jets / high -pressure washers
When using steam jets or high-pressure 
washers, ensure that you maintain suffi-
cient clearance to the vehicle and do not exceed 
a temperature of 140 7/60 6. 
Insufficient clearance or excessive pressure or 
temperature can lead to  component damage or 
water penetration. Follow the operating instruc-
tions of the high-pressure washer. <
When using high-pressure washers, do 
not spray against the sensors and cam-
ba8_E9091_cic.book  Seite 218  Mittwoch, 29. Oktober 2008  2:59 14 

Mobility
 227Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Fender-mounted lamps
Sedan
1.Using a screwdriver, pry off the cover in the 
cargo bay or release the turn-lock fastener 
by turning it counterclockwise and remove 
the cover.
2. Loosen the bulb holder at the clip, see 
arrow, and pull out.
3. Apply gentle pressure  to the bulb while 
turning it to the left for removal and replace-
ment.
4. Re-engage the bulb holder  so that it audibly 
clicks into place.
5. Reattach the cover  in the cargo bay.
Sports Wagon
1.Left-hand lamps:
Open the flap on the left-hand side of the 
cargo bay.
Right-hand lamps:
Open the cargo bay floor panel. Turn the 
screws on the cover, arrows  1, 90° and take 
out the cover, arrow  2. 2.
Loosen the bulb holder at the clip, see 
arrow, and pull out.
3. Apply gentle pressure  to the bulb while 
turning it to the left for removal and replace-
ment.
4. Re-engage the bulb holder  so that it audibly 
clicks into place.
5. Reattach the cover  in the cargo bay.
Lamps in the luggage compartment lid/
tailgate
Sedan
1.Take the warning triang le out of its holder, 
refer to page 231. Unscrew the holder using 
the screwdriver from the onboard tool kit.
2. Pry out the plastic plugs in the trim of the 
luggage compartment  lid using a screw-
driver and remove the trim.
3. Release the bulb holder at the clip, see 
arrow, and remove.
4. Apply gentle pressure  to the bulb while 
turning it to the left for removal and replace-
ment.
5. Re-engage the bulb holder  so that it audibly 
clicks into place.
ba8_E9091_cic.book  Seite 227  Mittwoch, 29. Oktober 2008  2:59 14 

Replacing components
228
6.
Reattach the trim of  the luggage compart-
ment lid and the holder for the warning tri-
angle.
Sports Wagon
1. Use a screwdriver to press out the cover at 
the clips, see arrows,  and fold it downward.
2. Fold away the foam insulating material.
3. Release the bulb holder at the clip, see 
arrow, and remove.
4. Apply gentle pressure to the bulb while 
turning it to the left for removal and replace-
ment.
5. Re-engage the bulb holder so that it audibly 
clicks into place.
6. Reattach the trim of the tailgate.
License plate lamp, center brake lamp, 
parking/tail lamp and turn signal*
These lamps use LED technology for operation. 
In the event of a malfunction, please contact 
your BMW center or a workshop that works 
according to BMW repair procedures with cor-
respondingly trained personnel.
Changing wheels
Your BMW is equipped with Run-Flat Tires as 
standard. This removes the need to change a 
wheel immediately in the event of a puncture.
For information on continuing to drive with a 
damaged tire, refer to Indica tion of a flat tire on 
page 84.
The symbol identifying Run- Flat Tires is a circle 
with the letters RSC on  the sidewall, refer to 
Run-Flat Tires, page 209.
When mounting new tires or changing over 
from summer to winter tires and vice versa, 
mount Run-Flat Tires for  your own safety. In the 
event of a flat, no spare wheel is available. Your 
BMW center will be glad to advise you. Refer 
also to New wheels and tires, page 209.
The tools for changing wheels are avail-
able as optional accessories from your 
BMW center. <
Jack mounting points
The jacking points are at the positions shown in 
the illustration.
Vehicle battery
Battery care
The battery is 100 % ma intenance-free, the 
electrolyte will last for the life of the battery 
when the vehicle is operated in a temperate cli-
mate. Your BMW center will be glad to advise in 
all matters concerning the battery.
ba8_E9091_cic.book  Seite 228  Mittwoch, 29. Oktober 2008  2:59 14