Navigation (NAV) 130
– Select Start route guidance page 129, fig.135, the
route is calculated and the map display is shown auto-
matically.
– Select one of the routes suggested in the single destina-
tion mode page 130 on the map display by rotating
and pressing the control knob.
– In the route plan map display, confirm the route
suggested page 132 by rotating and pressing the
control knob.After calculating route guidance, the Navigation System switches
a ut o ma t i c a l ly to ma p d i s p l a y m o d e . The ro u t e g u id a n c e i s s h o w n in
simplified form in the instrument cluster display
page 113. You
are additionally receive navigation voice prompts page 112.
When you have entered a final destination
page 119 and started
route guidance, you are offered up to three different routes to reach
your destination
page 119.
When you have entered a route plan and started route guidance,
you are shown the route with the different stopovers and various
information in the overview
page 132.
Entered destinations can be saved
page 135 and
page 137.
Route criteria
page 141 can be changed at anytime during guid-
ance, and the route will be recalculated.
If you do not complete route guidance you started, this route guid-
a n c e wi l l b e c o n t i n u e d t he n e x t t i m e t h e v e h i c l e i s s t a r t e d . Th is a l s o
applies to destinations entered which cannot be reached because of
local conditions (e.g. lake or tourist attraction). If you would like to
terminate this route guidance, select Cancel route guidance
page 132
Tips
Calculated destinations can also be changed in the map display by
moving the crosshairs
page 149
Single destination information before route guidanceFig. 136 Navigation: Example of map display after route has been calculatedWhen you have entered the destination data page 117
and the road network allows, you are offered up to three
different routes to choose from.
– Select one of the optional routes by rotating the control
knob.
Frequently Asked Questions (FAQ) 176Wa rra n t yThe same warranty conditions apply to the equipment
as to new vehicles.Damage under the warranty excludes improper treatment of the
radio or attempts to make repairs by unqualified persons.
The unit must not have suffered any external damage.
Exchange service
After expiration of the warranty, equipment requiring repair will be
exchanged for overhauled equipment at replacement value with an
exchange part warranty. This is dependent upon whether there is no
damage to the housing and no unqualified persons have attempted
to make repairs.
Tips
In a warranty case or in the event of an exchange, the “device card”
with the PIN number and the serial number must be presented to
the Audi dealership.
