2009 Alfa Romeo MiTo belt

14GETTING TO KNOW YOUR CAR
Passenger-side air bag/side bags
deactivated (amber)
The“warning light comes on when the front pas-
senger’s airbag and the side bags are disabled. With front
passenger airbag on, when the ignition key is turned to MAR, the
“warning light comes on steadily for several seconds, it flashes
for another few seconds and then it should go out.
“
Failure of the “warning light is indicated by the
¬warning light coming on. In addition, the airbag
system automatically disables the airbag on the
passenger’s side (both front and side airbags, where pro-
vided). Contact an Alfa Romeo Authorised Service imme-
diately to have the system checked.
Seat belts unfastened (red)
This warning light remains on steadily with the vehi-
cle at a standstill when the driver’s seat belt is not
correctly fastened. The warning light will flash and a
buzzer will sound if the vehicle is in motion and the front seat belts
are not correctly fastened.
If you wish to permanently deactivate the S.B.R. (Seat Belt Re-
minder) system buzzer, please contact your nearest Alfa Romeo
Authorised Service.
The system can be reactivated using the Set-up Menu.<
Low batter y charge (red)
(where provided)
The warning light comes on when the ignition key is
turned to MAR, but it should go out as soon as the en-
gine has started (with the engine running at idle speed a brief de-
lay before going out is acceptable).
If the warning light (or symbol in the display) remains on constantly
or flashes, contact your nearest Alfa Romeo Authorised Service.w
Failure of the ¬warning light is indicated by the
“warning light flashing for longer than the nor-
mal 4 seconds, thus signalling that the front pas-
senger airbag is deactivated. In addition, the airbag sys-
tem automatically disables the airbag on the passenger’s
side (both front and side airbags, where provided). In this
case, warning light
¬may not indicate a fault in the
system. Contact an Alfa Romeo Authorised Service im-
mediately to have the system checked.
001-126 Alfa MiTo GB 13-11-2008 10:08 Pagina 14

30GETTING TO KNOW YOUR CAR
SETUP MENU
The menu comprises a series of items which can be selected us-
ing the + and – buttons to access the different selection and set-
ting operations (setup) given in the following paragraphs. Some
items also have a sub-menu. The setup menu can be activated by
briefly pressing the MENU ESC button.The menu includes the following items:
– MENU
– SPEED BEEP
– HEADL. SENSOR (where provided)
– RAIN SENSOR (where provided)
– TRIP B DATA
– SET TIME
– SET DATE
– FIRST PAGE (where provided)
– SEE RADIO
– AUTOCLOSE
– UNITS
– LANGUAGE
– BUZZER VOLUME
– BUTTON VOL.
– BELT BUZZER
– SERVICE
– PASSENGER BAG
– DAY LIGHTS
– COURTESY LIGHTS
– EXIT MENU
NOTE On vehicles equipped with radio-navigation systems (where
provided), some menu items are shown on the navigator display.
001-126 Alfa MiTo GB 13-11-2008 10:08 Pagina 30

GETTING TO KNOW YOUR CAR39
1
Buzzer volume (Adjusting the
failure/warning buzzer volume)
With this function the volume of the buzzer accompanying any fail-
ure/warning indication can be adjusted (according to 8 levels).
To adjust the volume proceed as follows:
– briefly press MENU ESC: the previously set volume level will flash
on the display;
– press + or – to change the setting;
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.
Button vol. (Button volume adjustment)
This function may be used to adjust the volume of the beep ac-
companying the activation of buttons MENU ESC, + and – (ac-
cording to 8 levels).
To adjust the volume proceed as follows:
– briefly press MENU ESC: the previously set volume level will flash
on the display;
– press + or – to change the setting;
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.
On versions equipped with a reconfigurable multifunctional display,
the volume level is represented by bars. A buzzer will sound dur-
ing the adjustment procedure.
Belt buzzer (Buzzer activation
for S.B.R. indication)
This function can only be displayed after an Alfa Romeo Authorised
Service has deactivated the S.B.R. system (see the paragraph
on“S.B.R. system” in chapter 2).
001-126 Alfa MiTo GB 13-11-2008 10:08 Pagina 39

GETTING TO KNOW YOUR CAR57
1
Height adjustment (where provided)
Move lever B up or down until the required height is achieved.
IMPORTANT Carry out the adjustment whilst seated in the driver’s
seat.
Adjusting backrest inclination
Rotate knob C until the required position is reached.
fig. 22A0J0078m
For maximum safety, keep the back of your seat
upright, lean back into it and make sure the seat
belt fits closely across your chest and hips.
Lumbar adjustment (where provided)
Rotate knob D until the required position is reached.
Backrest tilt
To access the rear seats lift handle E upwards: this tilts the back-
rest and you can then slide the seat forward by pushing the back-
rest.
Moving back the back rest will return the seat to its original posi-
tion.
Check that the seat is firmly locked in the runners
by trying to move it back and forth.
001-126 Alfa MiTo GB 13-11-2008 10:08 Pagina 57

GETTING TO KNOW YOUR CAR101
1
EXPANDING THE LUGGAGE COMPARTMENT
Removing the parcel shelf
Proceed as follows:
❍free the ends of the two links A-fig. 62 supporting the parcel
shelf B, releasing eyelets C from pins D;
❍free pins A-fig. 63 on the outside of the shelf from housings B
in the side mounts, then remove the parcel shelf.
❍after removal, the parcel shelf can be loaded sideways into the
luggage compartment or placed between the front seat back-
rests and the folded-back rear seats (with the luggage com-
partment completely expanded).
Folding back the seats
Proceed as follows:
❍raise the head restraints to the maximum height, press both
buttons A-fig. 64 to the side of the two supports, then remove
the head restraints by sliding them upwards;
❍move the seat belts to the side, making sure that they are
correctly extended and not twisted;
fig. 62A0J0080mfig. 63A0J0081m
001-126 Alfa MiTo GB 13-11-2008 10:08 Pagina 101

102GETTING TO KNOW YOUR CAR
Repositioning the rear seat
Move the seat belts making sure that they are correctly extended
with no coils.
Lift up the backrests and push them back until a click is heard for
both mechanisms. Make sure that red strip on levers A-fig. 65. is
no longer visible; if it is, this indicates that the backrest has not
engaged.
Reposition the head restraints into their housings.
❍raise backrest levers A-fig. 65 and fold the required cushion for-
ward (when lever A is raised this is indicated by a red strip).
fig. 64A0J0083mfig. 65A0J0082m
001-126 Alfa MiTo GB 13-11-2008 10:08 Pagina 102

SAFETY127
2
Seat belts.................................................................... 128
S.B.R. system............................................................... 129
Pretensioners............................................................... 131
Carrying children safely................................................. 134
Fitting “Universal” child seat .......................................... 135
“Isofix” child restraint assembly setup .............................. 139
Front Airbags ............................................................... 142
Side Air bags (Side bag - Window bag) ............................ 145
“Alcohol Test” Kit ......................................................... 148
127-148 Alfa MiTo GB 12-11-2008 15:41 Pagina 127

128SAFETY
SEAT BELTS
USING THE SEAT BELTS
Wear the belt keeping the chest straight and rested against the back-
rest. To fasten the seat belts, hold tongue A-fig. 1 and insert it into
buckle B, until the locking click is heard.
If the seatbelt jams when pulling it out, let it rewind for a short
stretch and then pull it out again without jerking.
To unfasten the seat belts, press button C. Guide the seat belt
with your hand while it is rewinding, to prevent it from twisting.
fig. 1A0J0101mfig. 2A0J0102m
Never press button C-fig. 1 when travelling.
The rear seat is fitted with inertia seat belts with three anchor points
and reel. Fasten the rear seat belts as shown in fig. 2.
127-148 Alfa MiTo GB 12-11-2008 15:41 Pagina 128