2009 Alfa Romeo GT transmission fluid

●●●●●●●●●
●●
●●●●
●●●●
●●
●
●●●
●
●
●
●●●●●●●●●
●●●●●●●●●
●●●
●●●●●●●●●
●●●●●●●●●
CAR MAINTENANCE
218
20 40 60 80 100 120 140 160 180Thousands of km
Check and if necessary top up the Selespeed automatic transmission oil level
(2.0 JTS versions)
Sight check for conditions of timing gear drive toothed belt (3.2 V6 and JTD versions)
Check emissions/smoke at the exhaust (JTD versions)
Check operation of engine control system (through diagnosis socket)
Check mechanical transmission oil level
Change counter-rotating shaft drive belt
Change timing gear drive belt (1.8 T.SPARK and 2.0 JTS versions) (*)
Change timing gear drive belt (3.2 V6 and JTD versions) (*)
Change accessory poly-V drive belt
Change spark plugs (petrol versions)
Change engine oil and oil filter (petrol versions) (or every 24 months)
Change engine oil and oil filter (diesel with DPF versions)(**)
(or every 24 months)
Change engine oil and oil filter (diesel without DPF versions)(**)
(or every 24 months)
Change brake fluid (or every 24 months)
Change fuel filter (JTD versions)
Change pollen filter (or every year)
(*) Regardless of the km covered, the timing belt shall be replaced every 4 years for particularly demanding use (cold climates, driving in the city, idling for a long time) or in any case every 5 years.
(**) Engine oil and oil filter shall actually be changed according to the conditions of use of the car and it is indicated by the relevant warning light or message (where provided) on the instrument panel
(see “Warning lights and messages” paragraph).
If the car is used mainly on urban routes or if the yearly kilometres travelled are less than 10,000 km, the engine oil and filter must be changed every 12 months.

CAR MAINTENANCE
219
ADDITIONAL
OPERATIONS
Every 1000 kmor before long journeys,
check and if necessary top up:
– engine coolant fluid level
– brake/hydraulic clutch control fluid level
– power steering fluid level
– windscreen washer and headlamp wash-
er fluid level
– tyre pressure and conditions.
Every 3000 kmcheck and if necessary
top up the engine oil level.
The use of FL Seleniaproducts is rec-
ommended which have been designed and
made expressly for Alfa Romeo cars (see
“Refuelling” in the “Technical Specifica-
tions” chapter).
ANNUAL INSPECTION
PROGRAMME
For cars with an annual mileage
of below 20,000 km (for example
about 10,000 km) the following
yearly inspection programme is ad-
vised:
– Check tyre conditions/wear and if nec-
essary adjust the pressure (including spare
wheel)
– Check operation of lighting system
(headlights, direction indicators, hazard
warning lights, boot, passenger compart-
ment, glovebox lights, warning lights, etc.)
– Check operation of windscreen wiper
system, spray jet adjustment
– Check windscreen blade position/wear
– Check front disk brake pad conditions
and wear
– Check cleanness of bonnet and boot
locks, and lever cleanness and lubrication.– Sight check for conditions of: engine,
gearbox, transmission, pipes (exhaust - fu-
el supply - brakes), rubber parts (boots -
sleeves - bushes etc..), brake and fuel sup-
ply system hoses
– Check battery charge
– Sight check for conditions of various dri-
ve belts
– Check and if necessary top up fluid lev-
els (engine coolant, brakes, windscreen
washer, battery etc. )
– Change engine oil and oil filter
– Change pollen filter.

CAR MAINTENANCE
222
fig. 1 - 1.8 T. SPARK version
A0A0736b
A0A0681b
CHECKING LEVELS
Never smoke while work-
ing in the engine compart-
ment; gas and inflammable
vapours may be present, with the
risk of fire.
When topping up take
care not to confuse the var-
ious types of fluids: they
are incompatible with one anoth-
er and could seriously damage the
car.
fig. 2 - 2.0 JTS version 1Engine oil - 2Battery - 3Brake fluid -
4Windscreen/rear window/headlight
washer fluid - 5Engine coolant - 6Power
steering fluid - 7Selespeed transmission oil
(2.0 JTS Selespeed versions)

REFILLING
2.0JTS
Selespeed
63 (
▲)
7 (▲)
7,2
4.4
(❍)
2.0
0.6
1.2
0.52
2.5
4.2
3.2V6
63 (▲)
7 (▲)
7.2
5.9
(❍)
2.0
–
1.2
0.52
2.5
4.2
1.8 T.
SPARK
63 (▲)
7 (▲)
7.2
4.4 (❏)
2.0
–
1.2
0.52
2.5
4.2
2.0JTS
63 (
▲)
7 (▲)
7.2
4.4
(❍)
2.0
–
1.2
0.52
2.5
4.2TECHNICAL SPECIFICATIONS
252
JTD16V
63 (■)
7 (■)
7.2
4.5 (
●)
2.0
–
1.2
0.52
2.5
4.2
Fuel tank: litres
– including a reserve of litres
Engine cooling
system litres
Oil sump and filter litres
Mechanical transmission/
differential litres
Selespeed transmission litres
Hydraulic power steering litres
Hydraulic brake circuit
with ABSlitres
Windscreen washer and rearscreen
washer fluid reservoir litres
– with headlamp washer litresRecommended products and
genuine lubricants
(▲)Unleaded petrol with no less than
95 R.O.N
(■)Diesel fuel for motor vehicles
(Specification EN590)
Mixture of distilled water
andPARAFLU UP at 50%
(❏)SELENIA 20 K for Alfa Romeo
(❍)SELENIA RACING(●)SELENIA WR
TUTELA CAR TECHNYX
TUTELA CAR CS SPEED
TUTELA GI/A
TUTELA TOP 4
for Alfa Romeo
Mixture of water and fluid
TUTELA
PROFESSIONAL SC 35

TECHNICAL SPECIFICATIONS
254
Brake fluid
Protective agent for radiators
Windscreen and rear window
washer fluid Lubricants and greases for
transmissions Use
Fluid and lubricant specifications
for correct car operation
Synthetic-based oil, grade SAE 75W-85
that passes API GL-4 PLUS, FIAT 9.55550
Lubricant for automatic transmissions that passes
“ATF DEXRON II D LEV” specification
Specific fluid for gear selector electrohydraulic actuators
Molibdenum disulphide, lithium soap based grease.
Synthetic fluid, F.M.V.S.S. n. 116, DOT 4, ISO 4925, SAE J-1704
Protective with antifreeze action, red colour based on inhibited monoethylen
glycol and organic formula, that passes CUNA NC 956-16,
ASTM D 3306 specifications
Mixture of alcohol and surfactants CUNA NC 956-11Genuine fluids
and lubricants
TUTELA
CAR TECHNYX
TUTELA GI/A
TUTELA CAR CS SPEED
TUTELA STAR 500
TUTELA TOP 4
for Alfa Romeo
PARAFLU
UP
TUTELA
PROFESSIONAL SC 35Applications
Mechanical gearbox and
differential
Hydraulic power steering
Selespeed
electrohydraulic actuator
CV joints
on wheel side
Brake and clutch
hydraulic controls
Cooling circuits.
Proportion:
50% down to –35° C.
Not to be mixed with
products having different
formulas.
To be used diluted or
undiluted