2009 Alfa Romeo 159 engine

LEANING LEATHER SEATS
(optional for versions/
markets where applicable)
Remove dried on dirt with lightly moist-
ened chamois leather or cloth without
pressing too hard.
Remove liquid or grease stains with a dry
absorbent cloth without rubbing. Then
wipe with a soft cloth or chamois leather
with water and neutral soap.
If the stain persists, use specific prod-
ucts, carefully following the instructions
for use.
IMPORTANTNever use spirit or al-
cohol-based products.
247
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
TECHNICAL
SPECIFICATIONS
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
CAR
MAINTENANCE
Engine compartment
At the end of the winter the engine com-
partment should be carefully washed,
without directing the jet against electronic
control units. Contact a specialised work-
shop to have this done.
IMPORTANT The car should be
washed with the engine cold and the key
removed from the ignition device. After
washing make sure that the various pro-
tections (e.g. rubber caps and various cov-
ers) have not been damaged or removed.INTERIORS
Periodically check that water is not
trapped under the mats (due to water
dripping off shoes, umbrellas, etc.)
which could cause oxidisation of the
sheet metal.
CLEANING SEATS AND
FABRIC AND VELVET PARTS
Use a soft brush or vacuum cleaner to
remove dust. Velvet is cleaned better if
the brush is moistened.
Rub the seats with a sponge moistened
with a solution of water and neutral de-
tergent.
223-248 Alfa 159 GB 4-06-2008 9:44 Pagina 247

249
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
TECHNICALSPECIFICATIONS
TT T
E E
C C
H H
N N
I I
C C
A A
L L
S S
P P
E E
C C
I I
F F
I I
C C
A A
T T
I I
O O
N N
S S
IDENTIFICATION DATA ........................................ 250
ENGINE CODES - BODYWORK VERSIONS ............... 252
ENGINE.......................................................... 253
FUEL FEED/IGNITION ........................................ 255
TRANSMISSION............................................... 255
BRAKES........................................................... 256
STEERING........................................................ 256
SUSPENSIONS.................................................. 256
WHEELS.......................................................... 257
DIMENSIONS.................................................... 261
PERFORMANCE................................................. 263
WEIGHTS......................................................... 264
CAPACITIES...................................................... 266
FLUIDS AND LUBRICANTS................................... 267
FUEL CONSUMPTION......................................... 269
CO
2EMISSIONS.............................................. 270
RADIO FREQUENCY REMOTE CONTROL:
MINISTERIAL CERTIFICATIONS ............................. 271
249-270 Alfa 159 GB 4-06-2008 9:44 Pagina 249

250
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
TECHNICALSPECIFICATIONS
IDENTIFICATION LABEL
This is to be found in the engine com-
partment, aside the upper right shock-
absorber connection and it bears the fol-
lowing identification data:
A.Space for details of national ho-
mologation
B.Space for punching the consecutive
chassis number
IDENTIFICATION
DATA
You are advised to note the identifica-
tion codes. The identification data
stamped and given on the plates and
their position are the following fig. 1:
1- Identification label
2- Body label
3- Bodywork paint identification label
4- Engine label.C.Space available for maximum
weights authorised by various national
regulations
D.Space for version and any supple-
mentary indications to those specified
E.Space for smoke coefficient (diesel
versions only)
F.Space for punching the Manufactur-
er’s name.
A0A0045mfig. 1A0E0013mfig. 2
249-270 Alfa 159 GB 4-06-2008 9:44 Pagina 250

BODYWORK PAINT
IDENTIFICATION LABEL
This is located in the inner side of the
tailgatefig. 4and it includes:
A.Paint manufacturer
B.Name of colour
C.Colour code.
D.Colour code for touching up and re-
spraying.
ENGINE MARKING
Engine marking is stamped on the gear-
box side, on the rear left side.
BODYWORK LABEL
This is located on the passenger com-
partment floor near the front passen-
ger’s seat.
It can be reached by raising cover
A-fig. 3and it includes:
❒type of vehicle (ZAR 939000);
❒Manufacturer’s serial number (chas-
sis number).
251
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
TECHNICALSPECIFICATIONS
A0A0222mfig. 4A0A0175mfig. 3
249-270 Alfa 159 GB 4-06-2008 9:44 Pagina 251

252
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
TECHNICALSPECIFICATIONS
ENGINE CODES - BODYWORK VERSIONS
Versions Engine code Bodywork version
1.8939A4000 939AXL1A 21C
939BXL1A 22C ()
1.9 JTS939A6000 939AXA1B 00C
939BXA1B 10C ()
2.2 JTS939AXB1B 03C
939A5000939BXB1B 11C (
)
939AXB1B 03D (**)
939BXB1B 11 () (**)
3.2 JTS 4x2939A000 939AXG1B 44
939BXG1B 45 ()
3.2 JTS 4x4939A000 939AXG2B 09B
939BXG2B 16B ()
1.9 JTD
M8v939A1000 939AXE1B 04C
939A7000 (*) 939AXH1B 06C (*)
939BXE1B 14C (
)939BXH1B 17C ()(*)
1.9 JTD
M16v939A2000 939AXC1B 01C
939A8000 (*) 939AXC1B 01D (*)
939AXF1B 05C (*)
939BXC1B 12E (
)
939BXC1B 12F (*)
939BXC1B 12C (
) (*)
939BXC1B 12D (
) (*)
939BXF1B 15 (
) (*)
939BXF1B 15C (
) (*)
939BXF1B 15E () (*)
2.4 JTD
M4x2939A9000 939AXM1B 39B
939BXM1B 40B ()
2.4 JTD
M4x4939A9000 939AXM2B 35B
939BXM2B 36B ()
(*) For specific markets () Sportwagon versions (**) Pack TI
249-270 Alfa 159 GB 4-06-2008 9:44 Pagina 252

253
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
TECHNICALSPECIFICATIONS
1.9 JTS
939A6000
Otto
4 in line
4
86 x 80
1859
118
160
6500
190
19.4
4500
NGKFR5CP
Unleaded petrol
95 RON
(Specification
EN228)2.2 JTS
939A5000
Otto
4 in line
4
86 X 94.6
2198
136
185
6500
230
23.4
4500
NGKFR5CP
Unleaded petrol
95 RON
(Specification
EN228)3.2 JTS
939A000
Otto
6 in 60° V
4
85.6 X 89
3195
191
260
6200
322
32.8
4500
BOSCH
HR7MPP152
Unleaded petrol
95 RON
(Specification
EN228) 1.8
939A4000
Otto
4 in line
4
80.5 x 88.2
1796
103
140
6500
175
17.8
3800
BOSCH
FQR8 LEU2
Unleaded petrol
95 RON
(Specification
EN228)
To change plugs contact Alfa Romeo Authorized Services.
ENGINE
GENERAL
Engine code
Cycle
Number and layout of cylinders
Valves per cylinder
Piston bore and stroke mm
Total displacement cm3
Maximum power (EEC) kW
HP
corresponding ratio rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio rpm
Spark plugs
Fuel
249-270 Alfa 159 GB 4-06-2008 9:44 Pagina 253

254
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
TECHNICALSPECIFICATIONS
1.9
JTD
M8v
939A1000
Diesel
4 in line
2
82 x 90.4
1910
88
120
4000
280
28.6
2000
–
Diesel fuel
for motor
vehicles
(Specification
EN590)1.9
JTDM16v
939A2000
Diesel
4 in line
4
82 x 90.4
1910
110
150
4000
320
32.6
2000
–
Diesel fuel
for motor
vehicles
(Specification
EN590)2.4 JTD
M
200 HP (**)
939A3000
Diesel
5 in line
4
82
X90.4
2387
147
200
4000
400
40.8
2000
–
Diesel fuel
for motor
vehicles
(Specification
EN590)
(*) For specific markets
(**) QTronic gearbox versions1.9
JTD
M8v (*)
939A7000
Diesel
4 in line
2
82 x 90,4
1910
85
115
4000
275
28
2000
–
Diesel fuel
for motor
vehicles
(Specification
EN590)1.9
JTDM16v (*)
939A8000
Diesel
4 in line
4
82 x 90,4
1910
100
136
4000
305
31
2000
–
Diesel fuel
for motor
vehicles
(Specification
EN590)
2.4 JTDM
210 HP
939A9000
Diesel
5 in line
4
82 x 90.4
2387
154
210
4000
400
40.8
1500
–
Diesel fuel
for motor
vehicles
(Specification
EN590)
GENERAL
Engine code
Cycle
Number and layout of cylinders
Valves per cylinder
Piston bore and stroke mm
Total displacement cm3
Maximum power (EEC) kW
HP
corresponding ratio rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio rpm
Spark plugs
Fuel
249-270 Alfa 159 GB 4-06-2008 9:44 Pagina 254

255
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
TECHNICALSPECIFICATIONS
FUEL FEED/IGNITION
1.8 1.9 JTS - 2.2 JTS1.9 JTDM8V
3.2 JTS1.9 JTDM16v - 2.4 JTDM
Fuel feed Multipoint fuel injection Direct injection Direct injection, Common Rail
Modifications or repairs to the fuel feed system that are not carried out properly or do not
take the system’s technical specifications into account can cause malfunctions leading to
the risk of fire.
1.8
Five forward gears + reverse
and synchronisers for speeds
Dry single disk
with hydraulic control
Front2.4 JTDM210 HP 4x4
3.2 JTS 4x4
Six forward gears + reverse
and synchronisers for speeds
Dry single disk
with hydraulic control
Four-wheel drive 1.9 JTS - 2.2 JTS- 3.2 JTS 4x2
1.9 JTD
M8V- 1.9 JTDM16v
2.4 JTD
M200 HP
2.4 JTD
M210 HP
Six forward gears + reverse
and synchronisers for speeds
Dry single disk
with hydraulic control
Front
TRANSMISSION
Gearbox
Clutch
Drive
IMPORTANTIn the event of difficult disengagement, due to significant difference of grip between front and rear axle, do
not insist with heavy accelerations: it is actually more effective an attempt of disengagement at medium slow engine rpm,
with pauses of a few seconds if several attempts are necessary.
249-270 Alfa 159 GB 4-06-2008 9:44 Pagina 255