2009.5 Peugeot 308 SW BL seat adjustment

1. Audio and telematics system
steering mounted controls.

2. Steering lock and ignition.

3. Wiper/wash-wipe/trip computer
control stalk.

4. Instrument panel.

5. Driver's airbag.
Horn.

6. Gear lever.

7. Parking brake.

8. Panoramic sunroof blind control.

9. Heated seat control.

10. Door mirror controls.
Electric window controls.

11. Passenger's airbag deactivation
switch.

12. Manual headlamp height
adjustment.

13. Side adjustable air vent.

14. Front side window demisting vent.

15. Speaker (tweeter).

16. Windscreen demisting vent.

Driver’s seat Manual adjustment
Electric adjustment
Forwards-backwards

 62

 63 Seat back angle
Height

i
!
Steering wheel adjustment

1. Unlocking the control.

2. Adjustment for height and reach.

3. Locking the control.
Front seats
Other functions available...
Access to the rear seats (3-door).
Front passenger seat table posi-
tion (SW).
Storing driving positions (driver's
electric seat).
Heated seats.
Head restraint height
Lumbar Front armrest

 64
 106

 77 For your comfort, the height and longi-
tudinal position of the front armrest can
be adjusted.
It also has a storage compartment.
As a safety precaution, these op-
erations must only be carried out
when stationary.

i
Door mirrors

A. Selection of the mirror to be adjusted.

B. Adjustment of the position of the
mirror in the four directions.

C. De-selection of the mirror.
Other functions available...
Folding/Unfolding.
Automatic tilting of the mirror in re-
verse gear for parking. Interior mirror
Manual day/night model
Front seat belts

1. Fastening the buckle.

2. Height adjustment.

 76

 132

 75
1. Selection of the "day" position of
the mirror.

2. Mirror orientation.
Automatic day/night model

1. Automatic detection of the day/
night mode.

2. Mirror orientation.

 77
Adjustment

Operating the rear seats
2nd row rear seats

1. Forwards-backwards adjustment.

2. Seat back angle adjustment/Table
position.

3. Head restraint height adjustment.

4. Folding.

5. Removal/Installation.

6. Carrying.

 69 3rd row additional seats

A. Seat back angle adjustment/Table
position.

B. Head restraint height adjustment.

C. Folding.

D. Removal/Installation.

E. Carrying.

 71
Operating the front
passenger seat
Table position

A. Partial table position.

B. Full table position.

 65

i
65
COMFORT
Table position for front
passenger seat Heated seats control
With the engine running, the front seats
can be heated separately.

 Use the adjustment dial, placed on
the side of each front seat, to switch
on and select the level of heating
required:

0
: Off.

1
: Low.

2
: Medium.

3
: High.
Placing this seat in the table position, with
the rear seats also in the table position,
allows you to transport long objects.

 Pull the control upwards to fold the
seat back onto the seat cushion.
To lower the seat back fully, tilt the seat back angle adjustment control.

 Pull the control again to release the
seat back and raise it.
When put back in place, the seat back returns to its initial position. Do not forget to fold the "aircraft"
type table fi xed on the back of the
seat fi rst.

i!
66
COMFORT

Storing driving positions
System which takes into account the
electrical settings of the driver's seat
and exterior mirrors. It enables you to
store up to two positions using the but-
tons on the side of the driver's seat and
two further driving positions using the
two remote control keys.
Recalling a stored position
When the vehicle is unlocked, the driv-
er's seat and the door mirrors return to
the position stored by the remote control
key.
Storing a position Storing a new position cancels the
previous position.
When the ignition is off, after a few
consecutive position recalls, the
function will be deactivated until
the engine is started, to prevent
discharging of the battery.
Using the remote control keys
When the vehicle is locked, the remote
control key stores the position of the
driver's seat and door mirrors.
Each remote control key can store one
specifi c setting.
Ignition on

 Briefl y press button 1 or 2 to recall
the corresponding position.
An audible signal is heard indicating the end of the adjustment. Vehicle moving

 Press and hold button 1 or 2 until
the audible signal is heard indicating
the end of the adjustment.
Using buttons M/1/2

 Switch on the ignition.

 Adjust your seat and the door
mirrors.

 Press button M , then press button 1
or 2 within four seconds.
An audible signal is heard indicating that the position has been stored.

i
65
COMFORT
Table position for front
passenger seat Heated seats control
With the engine running, the front seats
can be heated separately.

 Use the adjustment dial, placed on
the side of each front seat, to switch
on and select the level of heating
required:

0
: Off.

1
: Low.

2
: Medium.

3
: High.
Placing this seat in the table position, with
the rear seats also in the table position,
allows you to transport long objects.

 Pull the control upwards to fold the
seat back onto the seat cushion.
To lower the seat back fully, tilt the seat back angle adjustment control.

 Pull the control again to release the
seat back and raise it.
When put back in place, the seat back returns to its initial position. Do not forget to fold the "aircraft"
type table fi xed on the back of the
seat fi rst.