2009.5 Citroen DS3 lock

Familiarisation
80
Open
A. Unfolding/Folding the key. B. Unlocking the vehicle.
Remote control key
Other functions...C. Normal locking of the vehicle or Deadlocking the vehicle. Vehicle location.
1. Opening the fuel filler flap. 2. Opening and hooking the fuel filler cap.
Fuel tank
96
165
Tank capacity: - approximately 50 litres (petrol), - approximately 48 litres (Diesel).
A. Interior release lever. B. Exterior safety catch. C. Bonnet stay.
Bonnet

11Familiarisation
Instruments and controls
1. Audio equipment steering wheel controls. 2. Steering lock and ignition. 3. Wipers/wash-wipe/trip computer stalk. 4. Instrument panel. 5. Scented air freshener. 6. Driver’s airbag. Horn. 7. Gear lever. 8. Parking brake. 9. Central armrest with storage. 10. Door mirror controls. Electric window controls. 11. Oddments storage 12. Alarm button Electronic stability programme button (ESP/ASR). 13. Side adjustable air vent. 14. Front door window demisting/defrosting vent. 15. Speaker (tweeter). 16. Windscreen demisting/defrosting vent.

Instruments and controls
1. Steering wheel adjustment. 2. Headlamp height adjustment. 3. Cruise control/speed limiter controls. 4. Lighting and direction indicator stalk 5. Central locking button. 6. Multifunction screen. 7. Hazard warning lamp switch. 8. Central adjustable air vents. 9. Sunshine sensor Hi-Fi audio system central speaker. 10. Passenger’s airbag. 11. Glove box /Passenger airbag deactivation/Fusebox. 12. Bonnet release lever. 13. 12 V accessory socket USB por t /auxiliary socket. 14. Upper and lower storage. 15. MyWay or Audio system. 16. Heating/air conditioning controls.

Sitting comfortably
4. Head restraint height adjustment.
Other adjustments
Other functions... Access to rear seats.
72
1. Unlock the adjustment mechanism. 2. Adjust for height and reach. 3. Lock the adjustment mechanism.
Steering wheel adjustment
75
For reasons of safety, these operations must only be carried out with the vehicle stationary.

Warning lampis onCauseAction/Obser vations
Diesel engine pre-heating fixed. The ignition switch is at the 2 nd position (ignition on). Wait until the warning lamp has switched off before starting. The duration for which the warning lamp is on is determined by the climatic conditions.
Parking brake fixed. The parking brake is applied or not properly released. Release the parking brake to switch off the warnin g lamp, keeping your foot on the brake pedal. Obser ve the safety recommendations. For fur ther information on the parking brake, refer t o the "Driving" section.
Engine coolant temperature fixed blue. On star ting the engine, it indicates that the engine is cold. After a few minutes driving, it swiches off to indicate that the engine temperature is normal. In order to protect your engine, avoid driving too hard until the warning lamp has switched off.
Foot on the brake pedal fixed. With an automatic gearbox, you have forgotten to press the brake pedal to come out of the P postion.
With the engine running, before releasing the park ing brake you must press the brake pedal to unlock the th e automatic gear selector lever and come out of the P position.
Automatic wiping fixed. The wiper control is pushed downwards. Automatic front wiping is activated.

Passenger's airbag system fixed. The control switch, located in the glove box, is in the " ON " position. The passenger's front airbag is activated. In this case, do not install a rear-facing child seat.
Turn the control switch to the " OFF " position to deactivate the front passenger's airbag. In this case you can install a rear-facing child seat. The passenger's airbag system is automatically put into ser vice on star ting the vehicle (" ON " position).

31Instruments and controls
Braking
fixed. The braking system fluid level has
dropped significantly.
Top up with brake fluid recommended by CITROËN.
If the problem persists, have the system checked by a CITROËN dealer.
+ fixed, associated with the ABS warning lamp. The electronic brake force distribution (EBFD) system has a fault. Have it checked by a CITROËN dealer.
Warning lampis onCauseAction/Obser vations
Anti-lock Braking System (ABS) fixed. The anti-lock braking system has a fault. The vehicle retains conventional braking. Drive carefully at reduced speed and contact a CITROËN dealer without delay.
Dynamic stability control (ESP/ASR)
flashing. The ESP/ASR regulation is active. The system optimises traction and improves the directional stability of the vehicle.
fixed. Unless it has been deactivated with the indicator lamp on the button on, the ESP/ASR system is faulty.
Have it checked by a CITROËN dealer.

37Instruments and controls
5 seconds after the ignition is switched on, the distance recorder resumes its normal operation. The spanner remains lit .
The distance remaining may be weighted by the time factor, depending on the driver's driving habits.
Therefore, the spanner may also come on if you have exceeded the two year ser vice inter val.
Service indicator zero reset
After each ser vice, the ser vice indicator must be reset to zero. The procedure for resetting to zero is as follows:  switch off the ignition,  press and hold the trip distance recorder zero reset button,  switch on the ignition; the distance recorder display begins a countdown,  when the display indicates "=0" , release the button; the spanner disappears.
Following this operation, if you wish to disconnect the battery, lock the vehicle and wait at least five minutes for the zero reset to be taken into account.
Retrieving the service information
You can access the ser vice information at any time.  Press the trip distance recorder zero reset button. The ser vice information is displayed for a few seconds, then disappears.
Service overdue
For 5 seconds after the ignition is switched on, the spanner flashes to indicate that the ser vice must be carried out as soon as possible. Example: the ser vice is overdue by 300 km. For 5 seconds after the ignition is switched on, the display indicates:

Instruments and controls
System which measures the total distance travelled by the vehicle during its life. The total and trip distances are displayed for thir ty seconds when the ignition is switched off, when the driver's door is opened and when the vehicle is locked or unlocked.
Total distance recorder
System which measures a distance travelled during a day or other period until it is reset to zero by the driver.  With the ignition on, press the button until zeros appear.
Trip distance recorder
System for manual adjustment of the brightness of the instruments and controls in relation to the exterior brightness.
Lighting rheostat
Activation
When the lighting is on:  press the button to change the brightness
of the instruments and controls,  when the level of brightness required is reached, release the button.
Deactivation
When the lighting is off, or in day mode on vehicles fitted with LED lamps, pressing the button does not have any effect.