Page 4 of 244
11Familiarisation
Instruments and controls
1. Cruise control/speed limiter controls. 2. Headlamp height adjustment. 3. Steering wheel adjustment. 4. Lighting and direction indicator stalk 5. Instrument panel. 6. Driver's airbag. Horn. 7. Gear lever. 8. 12 V accessory socket USB por t /auxiliary socket. 9. Heated seat control. 10. Bonnet release lever. 11. Door mirror controls. Electric window controls. 12. Fusebox. 13. Electronic stability programme button (ESP/ASR). 14. Front door window demisting/defrosting vent. 15. Speaker (tweeter). 16. Windscreen demisting/defrosting vent.
Page 6 of 244
13Familiarisation
Sitting comfortably
3. Seat back angle adjustment.
71
Front seats
1. For wards-backwards adjustment. 2. Height adjustment.
Page 7 of 244
Sitting comfortably
4. Head restraint height adjustment.
Other adjustments
Other functions... Access to rear seats. Heated seats.
72
1. Unlock the adjustment mechanism. 2. Adjust for height and reach. 3. Lock the adjustment mechanism.
Steering wheel adjustment
75
For reasons of safety, these operations must only be carried out with the vehicle stationary.
Page 8 of 244
15Familiarisation
Sitting comfortably
Door mirrors
Adjustment
A. Selecting the door mirror. B. Adjusting the position of the door mirror.
C. De-selecting the door mirror.
76
Other functions... Folding/Unfolding.
Rear view mirror
Manual day/night type
1.Selecting the "day" position of the rear view mirro r. 2. Rear view mirror orientation.
77
Automatic day/night type
77
1. Automatic detection of day/night mode. 2. Rear view mirror orientation.
A. Fitting the belt. B. Fastening.
C. Check that the belt is correctly fastened by pulling on the belt webbing.
Front seat belts
133
Page 62 of 244
71Comfort
Front seats
Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfor t.
Manual adjustments
F o r w a r d s - b a c k w a r d s a d j u s t m e n t
Raise the control and slide the seat for wards or backwards.
D r i v e r ' s o r p a s s e n g e r ' s s e a t h e i g h t a d j u s t m e n t
Pull the control upwards to raise or push
it downwards to lower, as many times as necessary, to obtain the position required.
Seat back angle adjustment
Push the control rear wards.
Page 63 of 244
Additional adjustments
H e a d r e s t r a i n t h e i g h t a d j u s t m e n t
To raise the head restraint, pull it upwards. To remove the head restraint, press the lug A and pull the head restraint upwards. To put the head restraint back in place, engage the head restraint stems in the openings keeping them in line with the seat back. To lower the head restraint, press the lug Aand the head restraint at the same time.
The head restraint is fitted with a frame with notches which prevents it from lowering; this is a safety device in case
of impact. T h e a d j u s t m e n t i s c o r r e c t w h e n t h e u p p e r e d g e o f t h e h e a d r e s t r a i n t i s
l e v e l w i t h t h e t o p o f t h e h e a d . Never drive with the head restraints removed; they must be in place and adjusted correctly.
Page 64 of 244
73Comfort
A c c e s s t o t h e r e a r s e a t s
Pull the control upwards to fold the seat back and move the seat for ward. When put back in place, the seat returns to its initial position.
No person or object should prevent the seat slide from returning to its initial position; the return to this position is necessary for longitudinal locking. Check that the seat belt has reeled in correctly so as to not impede access to the rear seats for passengers.
Heated seats control
With the engine running, the front seats can be heated separately. Use the adjustment dial, placed on the side of each front seat, to switch on and select the level of heating required: 0: Off. 1 : Low. 2 : Medium. 3 : High.
G r a b h a n d l e
This easy to use handle, located at the top of the side trim: - provides a means of suppor t for the outer rear passengers when moving, - provides a hand hold to ease access to the rear seats, - facilitates exit from the rear seats.
Page 129 of 244
135Safety
The driver must ensure that passengers use the seat belts correctly and that they are all restrained securely before setting off. Wherever you are seated in the vehicle, always fasten your seat belt, even for shor t journeys. Do not inver t the seat belt buckles as they will not fulfil their role fully. The seat belts are fitted with an iner tia reel permitting automatic adjustment of the length of the strap to your size. The seat belt is stored automatically when not in use. Before and after use, ensure that the seat belt is reeled in correctly. The lower par t of the strap must be positioned as low as possible on the pelvis. The upper par t must be positioned in the hollow of the shoulder. The iner tia reels are fitted with an automatic locking device which comes into operation in
the event of a collision, emergency braking or if the vehicle rolls over. You can release the device by pulling firmly on the strap and
releasing it so that it re-winds slightly.
In order to be effective, a seat belt must: - be tightened as close to the body as possible, - be pulled in front of you with a smooth movement, checking that it does not twist, - be used to restrain only one person, - not bear any trace of cuts or fraying, - not be conver ted or modified to avoid affecting its per formance. In accordance with current safety regulations, all repairs and checks must be carried out by a CITROËN dealer who guarantees that the work is carried out correctly. Have your seat belts checked regularly by a CITROËN dealer and par ticularly if the straps show signs of damage. Clean the seat belt straps with soapy water or a textile cleaning product, sold by CITROËN dealers.
After folding or moving a seat or rear bench seat, ensure that the seat belt is positioned and reeled in correctly.
Recommendations for children
Use a suitable child seat if the passenger is less than 12 years old or shor ter than one and a half metres. Never use the same seat belt to secure more than one person. Never allow a child to travel on your lap.
In the event of an impact
Depending on the nature and seriousness of the impacts , the pre-tensioning device may be triggered before and independentlyof the airbags. Triggering of the pre-tensioners is accompanied by a slight discharge of harmless smoke and a noise, due to the activation of the pyrotechnic car tridge incorporated in the system. In all cases, the airbag warning lamp comes on. Following an impact, have the seat belts system checked, and if necessary replaced, by a CITROËN dealer.
