2009.5 Citroen C5 ignition
[x] Cancel search: ignitionPage 34 of 314
I
36M O N I T O R I N G
Service indicator zero reset
A f t e r e a c h s e r v i c e , t h e s e r v i c e i n d i -
c a t o r m u s t b e r e s e t t o z e r o .
T h e p r o c e d u r e f o r r e s e t t i n g t o z e r o
is as follows:
s w i t c h o f f t h e i g n i t i o n ,
press and hold the trip distance
r e c o r d e r z e r o r e s e t b u t t o n ,
switch on the ignition; the dis-
t a n c e r e c o r d e r d i s p l a y b e g i n s a
c o u n t d o w n ,
w h e n t h e d i s p l a y i n d i c a t e s "=0" ,
release the button; the spanner
disappears.
F o l l o w i n g t h i s o p e r a t i o n , i f y o u w i s h
t o d i s c o n n e c t t h e b a t t e r y , l o c k t h e
v e h i c l e a n d w a i t a t l e a s t fi v e m i n u t e s
f o r t h e z e r o r e s e t t o b e t a k e n i n t o a c -
count. Engine oil level indicator
S y s t e m w h i c h i n f o r m s t h e d r i v e r
whether the engine oil level is cor-
rect or not.
This information is indicated for a
few seconds when the ignition is
s w i t c h e d o n , a f t e r t h e s e r v i c e i n f o r -
mation.
T h e l e v e l r e a d w i l l o n l y b e c o r r e c t i f
the vehicle is on level ground and
the engine has been off for more
t h a n 1 5 m i n u t e s .
Oil level correct
Oil level low
T h i s i s i n d i c a t e d b y d i s p l a y i n g o f t h e
message "Oil level incorrect".
I f t h e l o w o i l l e v e l i s c o n fi r m e d b y a
c h e c k u s i n g t h e d i p s t i c k , i t i s e s s e n t i a l
that the level is topped up to prevent
damage to the engine. Oil level gauge fault
T h i s i s i n d i c a t e d b y d i s p l a y i n g o f t h e
message "Oil level measurement in-
v a l i d " . C o n s u l t a C I T R O Ë N d e a l e r .
Page 35 of 314
I
36M O N I T O R I N G
Service indicator zero reset
A f t e r e a c h s e r v i c e , t h e s e r v i c e i n d i -
c a t o r m u s t b e r e s e t t o z e r o .
T h e p r o c e d u r e f o r r e s e t t i n g t o z e r o
is as follows:
s w i t c h o f f t h e i g n i t i o n ,
press and hold the trip distance
r e c o r d e r z e r o r e s e t b u t t o n ,
switch on the ignition; the dis-
t a n c e r e c o r d e r d i s p l a y b e g i n s a
c o u n t d o w n ,
w h e n t h e d i s p l a y i n d i c a t e s "=0" ,
release the button; the spanner
disappears.
F o l l o w i n g t h i s o p e r a t i o n , i f y o u w i s h
t o d i s c o n n e c t t h e b a t t e r y , l o c k t h e
v e h i c l e a n d w a i t a t l e a s t fi v e m i n u t e s
f o r t h e z e r o r e s e t t o b e t a k e n i n t o a c -
count. Engine oil level indicator
S y s t e m w h i c h i n f o r m s t h e d r i v e r
whether the engine oil level is cor-
rect or not.
This information is indicated for a
few seconds when the ignition is
s w i t c h e d o n , a f t e r t h e s e r v i c e i n f o r -
mation.
T h e l e v e l r e a d w i l l o n l y b e c o r r e c t i f
the vehicle is on level ground and
the engine has been off for more
t h a n 1 5 m i n u t e s .
Oil level correct
Oil level low
T h i s i s i n d i c a t e d b y d i s p l a y i n g o f t h e
message "Oil level incorrect".
I f t h e l o w o i l l e v e l i s c o n fi r m e d b y a
c h e c k u s i n g t h e d i p s t i c k , i t i s e s s e n t i a l
that the level is topped up to prevent
damage to the engine. Oil level gauge fault
T h i s i s i n d i c a t e d b y d i s p l a y i n g o f t h e
message "Oil level measurement in-
v a l i d " . C o n s u l t a C I T R O Ë N d e a l e r .
Page 58 of 314
III
59
C O M F O R T
FRONT SEATS
ELECTRIC ADJUSTMENTS
To adjust the electric seats, switch on the ignition or start the engine if the vehicle
has gone into economy mode.
Seat adjustments are also possible for a short period after ope ning one of the
front doors or switching off the ignition.
2. Adjustment of the backrest
angle
Move the control forwards or backwards to adjust the backrest
angle.
3. Adjustment of the angle of the
top of the backrest
Move the control forwards or backwards to adjust the angle of
the top of the backrest.
1. Adjustment of the seat height
and angle, and longitudinal
adjustment
Raise or lower the front of
the control to adjust the seat
cushion angle.
Raise or lower the rear of the
control to raise or lower the seat.
Simultaneously raise or lower
the front and rear of the control
in order to raise or lower the
entire seat.
4. Adjustment of lumbar support
This function allows you to inde- pendently adjust the height and
level of lumbar support.
Move the control:
Forwards or backwards to in-
crease or reduce the lumbar
support.
Upwards or downwards to raise or
lower the lumbar support zone.
Head restraint height and
angle adjustments on electric
seats
To adjust the angle of the head
restraint, push back or pull for-
ward section C of the head re-
straint until you reach the desired
position.
To raise it, pull upwards.
To lower it, press on the control D
to unlock it, and simultaneously on
the head restraint itself.
To remove it, press on the control D
to unlock it, then pull it upwards.
Page 59 of 314
III
60
C O M F O R T
This function provides the driver with
a back massage. It only operates
when the engine is running.
Press on button A .
The warning lamp comes on and the
massage function is activated for a
period of 1 hour. During this time,
massage is performed in cycles of
6 minutes (4 minutes of massage fol-lowed by 2 minutes break). In total,
the system will perform 10 cycles.
After 1 hour, the function is deacti-
vated. The warning lamp goes out.
Massage function The Welcome function
The welcome function assists entry
and leaving the vehicle.
After switching off the ignition and
opening the driver’s door, the seat
moves back automatically and then
stays in this position, ready for the
next entry to the vehicle.
When switching on the ignition, the
seat moves forward to the memo-
rised driving position.
When moving the seat, take care
that no person or object hinders the
automatic movement of the seat.
This function is deactivated by de-
fault. You may activate or deactivate
this function using the "Main Menu"
on the instrument panel screen. To
do so, select "Vehicle parameters/
Comfort/Driver welcome".
Deactivation
You can deactivate the massage
function at any time by pressing on
button A .
Heated seats control
With the engine running, the front
seats can operate separately.
Use the corresponding adjust-
ment dial, placed on the outer
side of each front seat, to switch
on and select the level of heating
required:
0 : Off.
1 : Low.
2 : Medium.
3 : High.
Page 60 of 314
III
61
C O M F O R T
Storing driving positions
System which takes into account the
settings of the driver's seat and air
conditioning. It enables you to store
up to two positions using the buttons
on the side of the driver's seat. Storing a position
Using buttons M/1/2
Switch on the ignition.
Adjust your seat.
Press button M , then press but-
ton 1 or 2 within four seconds.
An audible signal is heard indicating
that the settings have been stored.
Storing a new position cancels the
previous position.
Recalling a stored position
Ignition on or engine running
B r i e fl y p r e s s b u t t o n 1 or 2 to re-
call the corresponding position.
An audible signal is heard indicating
the end of the adjustment.
When the ignition is on, after a few
consecutive position recalls, the
function will be deactivated until the
engine is started, to prevent dis-
charging of the battery. For your safety, avoid storing a
driving position while driving.
REAR HEAD RESTRAINTS
The rear head restraints can be re-
moved and have two positions:
- high, position for use,
- low, storage position.
To raise a head restraint, pull it up-
wards.
To lower it, press the lug then the
head restraint.
To remove it, place it in the high
position, push the lug and pull it
upwards.
T o r e fi t i t , e n g a g e t h e h e a d r e s t r a i n t
rods in the holes taking care to re-
main in line with the seat back.
Never drive with the head restraints removed, they must be in place
and correctly adjusted.
Page 61 of 314
III
61
C O M F O R T
Storing driving positions
System which takes into account the
settings of the driver's seat and air
conditioning. It enables you to store
up to two positions using the buttons
on the side of the driver's seat. Storing a position
Using buttons M/1/2
Switch on the ignition.
Adjust your seat.
Press button M , then press but-
ton 1 or 2 within four seconds.
An audible signal is heard indicating
that the settings have been stored.
Storing a new position cancels the
previous position.
Recalling a stored position
Ignition on or engine running
B r i e fl y p r e s s b u t t o n 1 or 2 to re-
call the corresponding position.
An audible signal is heard indicating
the end of the adjustment.
When the ignition is on, after a few
consecutive position recalls, the
function will be deactivated until the
engine is started, to prevent dis-
charging of the battery. For your safety, avoid storing a
driving position while driving.
REAR HEAD RESTRAINTS
The rear head restraints can be re-
moved and have two positions:
- high, position for use,
- low, storage position.
To raise a head restraint, pull it up-
wards.
To lower it, press the lug then the
head restraint.
To remove it, place it in the high
position, push the lug and pull it
upwards.
T o r e fi t i t , e n g a g e t h e h e a d r e s t r a i n t
rods in the holes taking care to re-
main in line with the seat back.
Never drive with the head restraints removed, they must be in place
and correctly adjusted.
Page 63 of 314
III
63
C O M F O R T
MIRRORS
Door mirrors
E a c h fi t t e d w i t h a n a d j u s t a b l e m i r r o r
glasses providing the lateral rear-
ward vision necessary for overtaking
or parking. They can also be folded.
Adjustment
With the ignition on:
move control A to the right or to
the left to select the corresponding
mirror,
move control B in all four direc-
tions to adjust,
return control A to the central po-
sition. Demisting/defrosting of the door
mirrors is associated with that of
the rear screen.
Folding
from outside; lock the vehicle
using the remote control or the
key.
from inside; with the ignition on,
pull control A rearwards.
If the mirrors are folded using
control A , they will not unfold when
the vehicle is unlocked. Control A
must be pulled again.
Unfolding
from outside; unlock the vehicle
using the remote control or the
key.
from inside; with the ignition on,
pull control A rearwards.
If the position is changed manually,
a long press on control A re-engages
the mirror.
The folding and unfolding of the exte-rior mirrors using the remote control
can be deactivated by a CITROËN
dealer. The objects observed are, in reality,
closer than they appear.
Take this into account in order to
correctly judge the distance of ve-
hicles approaching from behind.
Page 67 of 314
IV
67
O P E N I N G S
First press button A to fold
the key.
Locating your vehicle
Press the closed padlock to locate
your locked vehicle in a car park.
This is indicated by switching on of the
i n t e r i o r l i g h t i n g a n d fl a s h i n g o f t h e d i -
rection indicators for a few seconds.
The vehicle remains locked. Guide-me-home lighting Anti-theft protecti
on
Electronic engine immobiliser
The key contains an electronic chip
which has a special code. When the
ignition is switched on, this code
must be recognised in order for
starting to be possible.
This electronic engine immobiliser
locks the engine management sys-
tem a few minutes after the ignition
is switched off and prevents starting
of the engine by anyone who does
not have the key.
In the event of a mal-
function, you are in-
formed by lighting of
this warning lamp, an
audible signal and a message on
the multifunction screen.
In this case, your vehicle does not
start; contact a CITROËN dealer as
soon as possible.
Folding the key
A press on button B oper-
ates the guide-me-home
lighting (lighting of the
sidelamps, dipped beams
and number plate lamps).
A second press before the end of
the timing cancels the guide-me-
home lighting.
The timed duration can be set via the
"Lighting" menu on the "Main Menu"
of the instrument panel screen.