2009.5 Citroen C5 DAG gearbox

IX
142
D R I V I N G
CRUISE CONTROL
System which automatically main-
tains the vehicle speed programmed
by the driver, without any action on
the accelerator pedal.
The cruise control is switched on
manually: the vehicle speed must be
at least 25 mph (40 km/h) and you
must be in at least:
- 4th gear for manual gearboxes,
- 2nd gear for automatic gearboxes. Displays on the instrument
panel
The programmed information is
grouped together in zone
A of the
instrument panel.
Programming

 Press button 4 to select cruise
control mode "
CRUISE
" .
Steering mounted controls
The cruise control switches are lo-
cated on the left-hand side of the
steering wheel. The selection is confi rmed by the
display of the function in zone
A of
the instrument panel.
When the function is selected, no
cruising speed has yet been
memorised. Once the desired speed has been
reached using the accelerator, press
button
1 or button 2 . The cruising
speed is then memorised and cruise
control is activated. The cruising
speed is displayed in zone A of the
instrument panel, and "ON" is dis-
played.
Adjustment of the memorised
speed while cruise control is
in operation
You can adjust the memorised
speed, displayed in zone A , by
pressing:
- Button 1 to increase the speed.
- Button 2 to reduce the speed.
Successive presses will modify the
cruise speed in steps of 1 mph and a
continuous press in steps of 5 mph.
You can then release the accelera-
tor pedal. The vehicle will automati-
cally keep to the speed chosen.
The vehicle speed may vary slightly
from that memorised.
If during cruise control the system
cannot keep to the cruise speed
(e.g. on a steep descent), then the
speed fl ashes. If necessary, brake to
curb your speed.

IX
!
143
D R I V I N G
Cruise control must only be
used wh e re the traffi c condi-
tions permit driving at a con-
stant speed .
Do not use it on congested roads
or when the weather or the road
conditions are poor .
The driver must remain attentive
and in complete control of the ve-
hicle .
You are recommended to keep your
feet within range of the pedals .
Overriding the programmed
speed
While cruise control is in operation,
it is always possible to go above the
programmed speed simply by pres-
sing the accelerator pedal (for ex-
ample to overtake another vehicle).
The speed displayed in zone A
fl ashes.
You only have to release the ac-
celerator pedal to return to the pro-
grammed speed.
Suspension/Resumption

 Either by pressing the brake
pedal or the clutch pedal.

 Or by pressing button 3 .

 Or by the ESP or ASR systems
being active.
For vehicles with a manual gearbox,
cruise control is deactivated if the
gear lever is in neutral. Reactivation
-
By recalling the memorised
speed
After deactivation, press button 3 .
Your vehicle automatically returns
to the memorised cruising speed.
The memorised speed and "ON"
are displayed in zone A .
If the memorised cruising speed is higher than the current speed,
the vehicle will accelerate strong-
ly to reach the current speed.
- By selecting the current speed
Press button 1 or 2 once the de-
sired speed has been reached.
The new speed and "ON" will
appear in zone A .
Return to normal driving

 Either press on button 5 .

 Or select the cruise control func-
tion.

 Or stop the engine.
The speed that was chosen is no
longer memorised.

"PAUSE" will be displayed in zone A
of the instrument panel.
These actions do not cancel the
cruising speed which remains dis-
played on the instrument panel. Operating fault

If there is a malfunction, a mes-
sage is displayed accompanied by
an audible signal and lighting of the

SERVICE warning lamp.
Have it checked by a CITROËN
dealer.

X
!
162
C H E C K S
Brake pads Brake wear depends on
the style of driving, par-
ticularly in the case of ve-
hicles used in town, over
short distances. It may be
necessary to have the condition of
the brakes checked, even between
vehicle services.
Unless there is a leak in the circuit, a
drop in the brake fl uid level indicates
that the brake pads are worn.
Manual gearbox
The gearbox does not re-
quire any maintenance (no
oil change).
Automatic gearbox The gearbox does not re-
quire any maintenance (no
oil change). Brake disc wear
For information relating to
checking the brake disc
wear, contact a CITROËN
dealer.
Parking brake If a loss of effectiveness
of this system is noticed,
the parking brake must be
checked, even between
two services.
This system must be checked by a
CITROËN dealer.
Only use products recommended
by CITROËN or products of equiv-
alent quality and specifi cations.
Do not use a dry cloth with an abra-
sive product for the maintenance of
aluminium parts; use a sponge and
soapy water.
In order to optimise the operation
of units as important as the braking
system, CITROËN selects and of-
fers very specifi c products.
To avoid damaging the electrical
units, the use of a high pressure
washer in the engine compartment
is strictly
prohibited .
Refer to the Maintenance and
Warranty Guide for the details of the
level checking interval for this com-
ponent.
Refer to the Warranty and
Maintenance Record for details of
the level checking interval for this
component.

XII
194
T E C H N I C A L D A T A

MODELS:
ENGINES AND GEARBOXES

Model codes:
RD... RW...
6FYC RFJF RFJC/FF 5FV-5FN XFVJ

PETROL ENGINES
1.8 litre 16V
127 hp
2 litre 16V
143 hp
Biofl ex 2 litre
16V 143 hp
1.6 litre 156 hp
3 litre V6 24V
215 hp
Cubic capacity (cc) 1 749 1 997 1 997 1 598 2 946
Bore x stroke (mm) 82.7 x 81.4 85 x 88 85 x 88 77 x 8 5.8 87 x 82.6
EU standard maximum power (kW) 92 103 103 115 155
Maximum power engine speed (rpm) 6 000 6 000 6 000 6 000 6 000
EU standard maximum torque (Nm) 170 200 200 240 290
Maximum torque engine speed (rpm) 3 750 4 000 4 000 1 400 3 750
Fuel Unleaded Unleaded Unleaded/E85 Unle aded Unleaded
Catalytic converter Yes Yes Yes Yes Yes

GEARBOXES Manual
(5-speed) Auto.
(4-speed) Manual
(5-speed) Manual
(6-speed) Auto.
(6-speed)

OIL CAPACITIES (in litres)
Engine (with fi lter replacement) 5 5 - 4.2 4.75
Gearbox - Final drive - - - - -

XII
197
T E C H N I C A L D A T A

MODELS:
ENGINES AND GEARBOXES

Model codes:
RD... RW...
9HZC

9HZC/1
RHF8 RHH-RHE X8ZA

DIESEL ENGINES
1.6 litre HDi
110 hp
2 litre HDi
140 hp
2 litre HDi 163 hp
3 litre V6 HDi
240 hp
Cubic capacity (cc) 1 560 1 997 1 997 2 993
Bore x stroke (mm) 75 x 88.3 85 x 88 85 x 88 84 x 90
EU standard maximum power (kW) 80 103 120 177
Maximum power engine speed (rpm) 4 000 4 000 3 750 3 800
EU standard maximum torque (Nm) 240 320 340 450
Maximum torque engine speed (rpm) 1 750 2 000 2 000 1 600
Fuel Diesel Diesel Diesel Diesel
Catalytic converter Yes Yes Yes Yes
Particle emission fi lter (PEF) Yes Yes Yes Yes

GEARBOXES Manual
(5-speed) Manual
(6-speed) Manual
(6-speed) Auto.
(6-speed) Auto.
(6-speed)

OIL CAPACITIES (in litres)
Engine (with fi lter replacement) 3.75 5.25 - -
Gearbox - Final drive 1.9 - - -

IX
!
!
125
D R I V I N G
Release
The electric parking brake releases
automatically and progressively
when you press the accelerator:

 with a manual gearbox (fi rst
gear or reverse gear engaged) ,
press down fully on the clutch
pedal then press on the accele-
rator pedal and move off.

 with an automatic gearbox ,
accelerate with the selector in
position D , M or R .
Full release of the parking brake is
confi rmed by: - the warning lamp P on
control A and on the ins-
trument panel going out,
- the display of a message "hand- brake off" on the instrument panel
screen.
When stationary, with the engine
running, do not press the accelera-
tor pedal unnecessarily (particularly
when starting the engine, including
in neutral), as you may release the
parking brake. Activation/Deactivation of the
automatic functions
Depending on the country of sale,
automatic application when swit-
ching off the engine and automa-
tic release when moving off can be
deactivated. The activation/deactiva-
tion is done in the instrument panel
screen confi guration menu. Select
"Vehicle parameters/Comfort/Auto
handbrake".
Deactivation of these func-
tions is signalled by this
warning lamp in the instru-
ment panel.
With the automatic functions deac-
tivated, the parking brake must be
applied and released manually.
Deactivation of the automatic
functions is recommended in
very cold weather (freezing) and
when towing (recovery, caravan...). Manual operation
Manual application/release of the
parking brake is always possible.
Application
With the vehicle stationary, to apply the
parking brake whether the engine is
running or off, pull on control A .
The application of the parking brake
is confi rmed by: -
the lighting of the warning lamp
on control A and of warning
lamp P on the instrument panel,
- the display of a message "handbrake
on" on the instrument panel screen.
When the driver’s door is ope-
ned with the engine running, a
beep is heard and a message
displayed if the parking brake has
not been applied. If the confi guration menu does not
have the option to activate/deactivate
the automatic functions, this can be
done by a CITROËN dealer.

XII
194
T E C H N I C A L D A T A

MODELS:
ENGINES AND GEARBOXES

Model codes:
RD... RW...
6FYC RFJC/FF

5FV-5FN
XFVJ

PETROL ENGINES 1.8 litre 16V
Biofl ex 2 litre
16V

1.6 litre THP 155
3 litre V6
Cubic capacity (cc) 1 749 1 997
1 598 2 946
Bore x stroke (mm) 82.7 x 81.4 85 x 88
77 x 85.8 87 x 82.6
EU standard maximum power (kW)/hp DIN 92/127 103/143 115/159 155/215
Maximum power engine speed (rpm) 6 000 6 000 6 000 6 000
EU standard maximum torque (Nm) 170 200 240 290
Maximum torque engine speed (rpm) 3 750 4 000 1 400 3 750
Fuel Unleaded Unleaded/E85
Unleaded Unleaded
Catalytic converter Yes Yes
Yes Yes

GEARBOXES Manual
(5-speed) Manual
(5-speed)
Auto.
(6-speed) Manual
(6-speed) Auto.
(6-speed)

OIL CAPACITIES (in litres)
Engine (with fi lter replacement) 5 -
4.2 4.2 4.75
Gearbox - Final drive - -
- - -