6-30
6-30
This shock absorber contains highly pressurized
nitrogen gas. Read and understand the following
information before handling the shock absorber. The
manufacturer cannot be held responsible for property
damage or personal injury that may result from improper
handling.
1. Do not tamper with or attempt to open the cylinderassembly.
2. Do not subject the shock absorber to an open flame or other high heat source. This may cause the unit
to explode due to excessive gas pressure.
3. Do not deform or damage the cylinder in any way. Cylinder damage will result in poor damping
performance.
4. Take your shock absorber to a Yamaha dealer for any service.
Rear shock absorber adjustment
The spring prelod of the rear shock absorber can be adjusted
to suit rider’s preference, weight and course condition.
Turn the adjusting ring in direction a to increase spring
preload and in direction b to decrease spring preload. Make
sure that the appropriate notch in the adjusting ring is aligned
with the position indicator on the rear shock absorber.
1. Spring preload adjusting ring 2.Position indicator
WARNING:
ADJUSTING POSITION SOFT STANDARD HARD
12 35
4
This shock absorber contains highly pressurized
nitrogen gas. Read and understand the following
information before handling the shock absorber. The
manufacturer cannot be held responsible for property
damage or personal injury that may result from improper
handling.
1. Do not tamper with or attempt to open the cylinder
assembly.
2. Do not subject the shock absorber to an open flame or other high heat source. This may cause the unit
to explode due to excessive gas pressure.
3. Do not deform or damage the cylinder in any way. Cylinder damage will result in poor damping
performance.
4. Take your shock absorber to a Yamaha dealer for any service.
Rear shock absorber adjustment
The spring prelod of the rear shock absorber can be adjusted
to suit rider’s preference, weight and course condition.
Turn the adjusting ring in direction a to increase spring
preload and in direction b to decrease spring preload. Make
sure that the appropriate notch in the adjusting ring is aligned
with the position indicator on the rear shock absorber.
1. Spring preload adjusting ring 2.Position indicator
WARNING:
ADJUSTING POSITION SOFT STANDARD HARD
12 35
4
