2008 YAMAHA GRIZZLY 700 brake

[x] Cancel search: brake

Page 8 of 164

YAMAHA GRIZZLY 700 2008  Owners Manual EBU17420
TABLE OF CONTENTS
SAFETY INFORMATION  .............................. 1-1
LOCATION OF THE WARNING AND 
SPECIFICATION LABELS  ............................ 2-1
DESCRIPTION ......................

Page 9 of 164

YAMAHA GRIZZLY 700 2008  Owners Manual Operating the drive select lever and 
driving in reverse  ...................................... 6-2
Engine break-in  .......................................... 6-4
Parking ...........................

Page 10 of 164

YAMAHA GRIZZLY 700 2008  Owners Manual Adjusting the brake pedal free play and 
checking the brake pedal position  .......... 8-49
Axle boots  ................................................ 8-51
Checking and lubricating the cables  .....

Page 13 of 164

YAMAHA GRIZZLY 700 2008  Owners Manual 1-3
1 steady speed when climbing a hill. If you stall or
roll backwards, follow the special procedure for
braking described in this manual. Dismount on
the uphill side or to a side if pointed straight

Page 22 of 164

YAMAHA GRIZZLY 700 2008  Owners Manual 3-1
3
EBU17680
DESCRIPTION 
EBU17690Left view
EBU17700Right view
1. Radiator cap
2. Battery
3. Fuses
4. Air filter case
5. Spark arrester
6. Engine oil dipstick
7. Oil filter cartridge
8. Coolant rese

Page 23 of 164

YAMAHA GRIZZLY 700 2008  Owners Manual 3-2
3
EBU17712Controls and instruments
NOTE:The ATV you have purchased may differ slightlyfrom the figures shown in this manual.
1. Drive select lever
2. Rear brake lever
3. Handlebar switches
4. Horn

Page 37 of 164

YAMAHA GRIZZLY 700 2008  Owners Manual 4-14
4 3. Tighten the locknut.
WARNING
EWB00240Improper adjustment of the speed limiter and
throttle could cause throttle cable damage or
improper throttle operation. You could lose
control, have an a

Page 38 of 164

YAMAHA GRIZZLY 700 2008  Owners Manual 4-15
4
EBU18611Drive select lever The drive select lever is used to shift your ATV into
the low-range, high-range, neutral, reverse and
park positions. See the “Operating the drive select
lever and
Page:   1-8 9-16 17-24 25-32 33-40 ... 48 next >