2008 TOYOTA tC fuel filter

30,000 Miles or 36 months
___ Replace engine air filter
___ Replace engine oil and oil filter1
___ Rotate tires
___ Inspect the following:_ Ball joints and dust covers
_ Brake lines and hoses
_ Brake linings/drums and brake pads/discs
4
_ Drive shaft boots
_ Engine coolant3
_ Exhaust pipes and mountings
_ Front differential oil
_ Fuel lines and connections, fuel tank band and fuel tank vapor
vent system hoses _ Fuel tank cap gasket
_ Steering gear box
_ Steering linkage and boots
_ Transmission fluid or oil
Additional Maintenance Items for
Special Operating Conditions2
Driving on dirt roads or dusty roads:
___ Tighten nuts and bolts on chassis
Dealer Service Verification: Date: Mileage:
tC
SCHEDULED
MAINTENANCE
GUIDE
2008
MAINTENANCE LOG
7
1Reset the oil replacement reminder light (
MAINT REQD) or the messageOIL MAINTENANCE REQUIRED
on the multi-information display after engine oil replacement.
2Perform these service items only if you drive primarily under the conditions indicated.3Refer to Engine Coolant in the Explanation of Maintenance Items section in the back of this guide for more
information.
4Inspect thickness measurement and disc runout.

60,000 Miles or 72 months
___ Replace engine air filter
___ Replace engine oil and oil filter1
___ Rotate tires
___ Inspect the following:_ Ball joints and dust covers
_ Brake lines and hoses
_ Brake linings/drums and brake pads/discs
4
_ Drive belts5
_ Drive shaft boots
_ Engine coolant3
_ Engine valve clearance6
_ Exhaust pipes and mountings
_ Front differential oil
_ Fuel lines and connections, fuel tank band and fuel tank vapor
vent system hoses _ Fuel tank cap gasket
_ Steering gear box
_ Steering linkage and boots
_ Transmission fluid or oil
Additional Maintenance Items for
Special Operating Conditions2
Driving on dirt roads or dusty roads:
___ Tighten nuts and bolts on chassis
Dealer Service Verification: Date: Mileage:
tC
SCHEDULED
MAINTENANCE
GUIDE
2008
MAINTENANCE LOG
11
1Reset the oil replacement reminder light (
MAINT REQD) or the messageOIL MAINTENANCE REQUIRED
on the multi-information display after engine oil replacement.
2Perform these service items only if you drive primarily under the conditions indicated.3Refer to Engine Coolant in the Explanation of Maintenance Items section in the back of this guide for more
information.
4Inspect thickness measurement and disc runout.5Initial inspection at 60,000 miles/72 months. Inspect every 15,000 miles/18 months thereafter.6Check for tappet noise and engine vibration and adjust if necessary.

90,000 Miles or 108 Months
___ Replace engine air filter
___ Replace engine oil and oil filter1
___ Rotate tires
___ Inspect the following:_ Ball joints and dust covers
_ Brake lines and hoses
_ Brake linings/drums and brake pads/discs
4
_ Drive belts
_ Drive shaft boots
_ Engine coolant
3
_ Exhaust pipes and mountings
_ Front differential oil
_ Fuel lines and connections, fuel tank band and fuel tank vapor
vent system hoses _ Fuel tank cap gasket
_ Steering gear box
_ Steering linkage and boots
_ Transmission fluid or oil
Additional Maintenance Items for
Special Operating Conditions2
Driving on dirt roads or dusty roads:
___ Tighten nuts and bolts on chassis
Dealer Service Verification: Date: Mileage:
tC
SCHEDULED
MAINTENANCE
GUIDE
2008
MAINTENANCE LOG
15
1Reset the oil replacement reminder light (
MAINT REQD) or the messageOIL MAINTENANCE REQUIRED
on the multi-information display after engine oil replacement.
2Perform these service items only if you drive primarily under the conditions indicated.3Refer to Engine Coolant in the Explanation of Maintenance Items section in the back of this guide for more
information.
4Inspect thickness measurement and disc runout.

120,000 Miles or 144 Months
___ Replace engine air filter
___ Replace engine oil and oil filter1
___ Replace spark plugs4
___ Rotate tires
___ Inspect the following:_ Ball joints and dust covers
_ Brake lines and hoses
_ Brake linings/drums and brake pads/discs
5
_ Drive belts
_ Drive shaft boots
_ Engine coolant
3
_ Engine valve clearance6
_ Exhaust pipes and mountings
_ Front differential oil
_ Fuel lines and connections, fuel tank band and fuel tank vapor
vent system hoses _ Fuel tank cap gasket
_ Steering gear box
_ Steering linkage and boots
_ Transmission fluid or oil
Additional Maintenance Items for
Special Operating Conditions2
Driving on dirt roads or dusty roads:
___ Tighten nuts and bolts on chassis
Dealer Service Verification: Date: Mileage:
tC
SCHEDULED
MAINTENANCE
GUIDE
2008
MAINTENANCE LOG
19
1Reset the oil replacement reminder light (
MAINT REQD) or the messageOIL MAINTENANCE REQUIRED
on the multi-information display after engine oil replacement.
2Perform these service items only if you drive primarily under the conditions indicated.3Refer to Engine Coolant in the Explanation of Maintenance Items section in the back of this guide for more
information.
4Required under the terms of the Emission Control Warranty.5Inspect thickness measurement and disc runout.6Check for tappet noise and engine vibration and adjust if necessary.

Engine Air Filter
Replace at specified intervals. When performing inspections, check for damage,
excessive wear and oiliness, and replace if necessary.
Engine Coolant
Drain and flush the cooling system and refill with an ethylene-glycol type coolant.
Inspect the radiator, condenser and/or intercooler for leaves, dirt and insects, and
clean if necessary. Inspect hoses and connections for corrosion and leaks. Tighten
connections and replace parts as necessary. A qualified technician should perform
these operations. (For further details, refer to “Radiator, Condenser and Hoses” in the
“Vehicle Maintenance and Care” section of the
Owner’s Manual.)
Note:
Your Scion is equipped with Genuine Toyota Super Long-Life Coolant. The
replacement intervals for engine coolant recommended in this booklet are based on
replacement with Genuine Toyota Super Long-Life Coolant or similar high-quality
non-silicate, non-amine, non-borate ethylene-glycol coolant with long-life hybrid
organic acid technology (i.e., a combination of low phosphates and organic acids). If
another type of ethylene-glycol coolant is used, replacement intervals may be
different.
Engine Oil and Oil Filter
Replace the oil filter and drain and refill the engine oil at specified intervals. For
recommended oil grade and viscosity, refer to the
Owner’s Manual.
Engine Valve Clearance
Check for tappet noise and engine vibration and adjust if necessary. A qualified
technician should perform this operation.
Exhaust Pipes and Mountings
Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration and
damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten
connections or replace parts as necessary.
Fuel Lines and Connections, Fuel Tank Band and Fuel Tank Vapor
Vent System Hoses
Visually inspect for corrosion, damage, cracks and loose or leaking connections.
Tighten connections or replace parts as necessary.
tC
SCHEDULED
MAINTENANCE
GUIDE 2008
EXPLANATION OF MAINTENANCE ITEMS
21