2008 TOYOTA tC differential

30,000 Miles or 36 months
___ Replace engine air filter
___ Replace engine oil and oil filter1
___ Rotate tires
___ Inspect the following:_ Ball joints and dust covers
_ Brake lines and hoses
_ Brake linings/drums and brake pads/discs
4
_ Drive shaft boots
_ Engine coolant3
_ Exhaust pipes and mountings
_ Front differential oil
_ Fuel lines and connections, fuel tank band and fuel tank vapor
vent system hoses _ Fuel tank cap gasket
_ Steering gear box
_ Steering linkage and boots
_ Transmission fluid or oil
Additional Maintenance Items for
Special Operating Conditions2
Driving on dirt roads or dusty roads:
___ Tighten nuts and bolts on chassis
Dealer Service Verification: Date: Mileage:
tC
SCHEDULED
MAINTENANCE
GUIDE
2008
MAINTENANCE LOG
7
1Reset the oil replacement reminder light (
MAINT REQD) or the messageOIL MAINTENANCE REQUIRED
on the multi-information display after engine oil replacement.
2Perform these service items only if you drive primarily under the conditions indicated.3Refer to Engine Coolant in the Explanation of Maintenance Items section in the back of this guide for more
information.
4Inspect thickness measurement and disc runout.

60,000 Miles or 72 months
___ Replace engine air filter
___ Replace engine oil and oil filter1
___ Rotate tires
___ Inspect the following:_ Ball joints and dust covers
_ Brake lines and hoses
_ Brake linings/drums and brake pads/discs
4
_ Drive belts5
_ Drive shaft boots
_ Engine coolant3
_ Engine valve clearance6
_ Exhaust pipes and mountings
_ Front differential oil
_ Fuel lines and connections, fuel tank band and fuel tank vapor
vent system hoses _ Fuel tank cap gasket
_ Steering gear box
_ Steering linkage and boots
_ Transmission fluid or oil
Additional Maintenance Items for
Special Operating Conditions2
Driving on dirt roads or dusty roads:
___ Tighten nuts and bolts on chassis
Dealer Service Verification: Date: Mileage:
tC
SCHEDULED
MAINTENANCE
GUIDE
2008
MAINTENANCE LOG
11
1Reset the oil replacement reminder light (
MAINT REQD) or the messageOIL MAINTENANCE REQUIRED
on the multi-information display after engine oil replacement.
2Perform these service items only if you drive primarily under the conditions indicated.3Refer to Engine Coolant in the Explanation of Maintenance Items section in the back of this guide for more
information.
4Inspect thickness measurement and disc runout.5Initial inspection at 60,000 miles/72 months. Inspect every 15,000 miles/18 months thereafter.6Check for tappet noise and engine vibration and adjust if necessary.

90,000 Miles or 108 Months
___ Replace engine air filter
___ Replace engine oil and oil filter1
___ Rotate tires
___ Inspect the following:_ Ball joints and dust covers
_ Brake lines and hoses
_ Brake linings/drums and brake pads/discs
4
_ Drive belts
_ Drive shaft boots
_ Engine coolant
3
_ Exhaust pipes and mountings
_ Front differential oil
_ Fuel lines and connections, fuel tank band and fuel tank vapor
vent system hoses _ Fuel tank cap gasket
_ Steering gear box
_ Steering linkage and boots
_ Transmission fluid or oil
Additional Maintenance Items for
Special Operating Conditions2
Driving on dirt roads or dusty roads:
___ Tighten nuts and bolts on chassis
Dealer Service Verification: Date: Mileage:
tC
SCHEDULED
MAINTENANCE
GUIDE
2008
MAINTENANCE LOG
15
1Reset the oil replacement reminder light (
MAINT REQD) or the messageOIL MAINTENANCE REQUIRED
on the multi-information display after engine oil replacement.
2Perform these service items only if you drive primarily under the conditions indicated.3Refer to Engine Coolant in the Explanation of Maintenance Items section in the back of this guide for more
information.
4Inspect thickness measurement and disc runout.

120,000 Miles or 144 Months
___ Replace engine air filter
___ Replace engine oil and oil filter1
___ Replace spark plugs4
___ Rotate tires
___ Inspect the following:_ Ball joints and dust covers
_ Brake lines and hoses
_ Brake linings/drums and brake pads/discs
5
_ Drive belts
_ Drive shaft boots
_ Engine coolant
3
_ Engine valve clearance6
_ Exhaust pipes and mountings
_ Front differential oil
_ Fuel lines and connections, fuel tank band and fuel tank vapor
vent system hoses _ Fuel tank cap gasket
_ Steering gear box
_ Steering linkage and boots
_ Transmission fluid or oil
Additional Maintenance Items for
Special Operating Conditions2
Driving on dirt roads or dusty roads:
___ Tighten nuts and bolts on chassis
Dealer Service Verification: Date: Mileage:
tC
SCHEDULED
MAINTENANCE
GUIDE
2008
MAINTENANCE LOG
19
1Reset the oil replacement reminder light (
MAINT REQD) or the messageOIL MAINTENANCE REQUIRED
on the multi-information display after engine oil replacement.
2Perform these service items only if you drive primarily under the conditions indicated.3Refer to Engine Coolant in the Explanation of Maintenance Items section in the back of this guide for more
information.
4Required under the terms of the Emission Control Warranty.5Inspect thickness measurement and disc runout.6Check for tappet noise and engine vibration and adjust if necessary.

T
he following descriptions are provided to give you a better understanding of the
maintenance items that should be performed on your vehicle. The scheduled
maintenance log indicates at which mileage/ time intervals each item should be
performed. Please note that many maintenance items should be performed only by a
qualified technician.
For further information on maintenance items you can perform yourself, see the
 Vehicle Maintenance and CareandDo-It-Yourself Maintenancesections of the
Owner’s Manual.
Ball Joints and Dust Covers
Check the suspension and steering linkage ball joints for looseness and damage.
Check all dust covers for deterioration and damage. Replace any deteriorated or
damaged parts. A qualified technician should perform these operations.
Brake Lines and Hoses
Visually inspect for proper installation. Check for chafing, cracks, deterioration and
signs of leakage. Replace any deteriorated or damaged parts. A qualified technician
should perform these operations.
Brake Linings/Drums and Brake Pads/Discs
Check the brake linings (shoes) and drums for scoring, burning, fluid leakage, broken
parts and excessive wear. Check the pads for excessive wear and the discs for runout,
excessive wear and fluid leakage. Replace any deteriorated or damaged parts. A
qualified technician should perform these operations.
Differential Oil
When performing inspections, check each component for signs of leakage. If you
discover any leakage, have it repaired by a qualified technician immediately.
Drive Belts
Inspect for cracks, excessive wear and oiliness. Check the belt tension and adjust if
necessary. Replace the belts if they are damaged.
Drive Shaft Boots
Check the drive shaft boots and clamps for cracks, deterioration and damage. Replace
any deteriorated or damaged parts and, if necessary, repack the grease. A qualified
technician should perform these operations.
tC
SCHEDULED
MAINTENANCE
GUIDE 2008
EXPLANATION OF MAINTENANCE ITEMS
20