2008 TOYOTA SIENNA reset

08 SIENNA_U (L/O 0801)
259
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
MP3/WMA player
There are two random playback features—
you can either listen to all of the files on
the compact discs in random order. You
can also listen to the files in a single
folder in random order.
To randomly play the files in a folder:
Quickly push and release “RAND” (preset
button 1). “
” will appear on the
display.
To randomly play all of the files on the
compact disc:
Push and hold “RAND” (preset button 1)
until you hear a beep. “
” will
appear on the display and the player will
play all of the files on the disc in random
order. To turn off the random playback
feature, push this button again. RPT (Repeat)
Compact disc player
There are two repeat features—you can
either replay a disc track or a whole com-
pact disc.
Repeating a track:
Quickly push and release “RPT” (preset
button 2) while the track is playing.
“
” will appear on the display. When
the track ends, it will automatically replay.
To turn off the repeat feature, push this
button again.
Repeating a disc:
Push and hold “RPT” (preset button 2)
until you hear a beep. “
” will ap-
pear on the display. The player will repeat
all the tracks on the disc you are listening
to. When the disc ends, the player will
automatically go back to the first track on
the disc and replay. To turn off the repeat
feature, push this button again. MP3/WMA player
There are two repeat features—you can
repeat a signal file or an entire folder.
Repeating a file:
Quickly push and release “RPT” (preset
button 2) while the file is playing.
“
” will appear on the display. When
the file ends, it will repeat automatically.
This process will be continued until you
push the button again to turn off the re-
peat feature.
Repeating a folder:
Push and hold “RPT” (preset button 2)
until you hear a beep. “
” will ap-
pear on the display. The player will repeat
all of the files in the folder. When the last
file in the folder ends, the folder will re-
peat from the beginning. To turn off the
repeat feature, push this button again.

08 SIENNA_U (L/O 0801)
260
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
SCAN
Radio
You can either scan all the frequencies on
a band or scan only the preset stations
for that band.
To scan the preset stations:
Push and hold the “SCAN” button until
you hear a beep. The radio will tune in
the next preset station up or down the
band, stay there for 5 seconds, and then
move to the next preset station. To stop
scanning, push this button again.
To scan all the frequencies:
Quickly push and release the “SCAN” but-
ton. The radio will find the next station up
or down the station band, stay there for
5 seconds, and then scan again to the
next station. To stop scanning, push this
button again.
XM Satellite Radio
∗—
You can either scan the currently selected
channel category or scan only the preset
channels for that band. To scan the preset channels:
Push and hold the “SCAN” button until
you hear a beep. “SCAN” appears on the
display. The radio will tune in the next
preset channel up the band, stay there for
5 seconds, and then move to the next
preset channel. To stop scanning, push
this button again.
To scan the currently selected channel
category:
Quickly push and release the “SCAN” but-
ton. “SCAN” appears on the display. The
radio will find the next channel in the
same channel category up the band, stay
there for 5 seconds, and then scan again.
To stop scanning, push this button again.
∗: Use of satellite radio requires XM

tuner and service. Contact your Toyota
dealer for details. Compact disc player
There are two scan features—you can ei-
ther scan the tracks on a specific disc or
scan the first tracks of all the discs in the
magazine.
Scanning the tracks on a disc:
Quickly push and release the “SCAN” but-
ton. “SCAN” will appear on the display
and the player will scan up or down all
the tracks on the disc you are listening to.
To stop scanning, push this button again.
If the player scanned all the tracks on the
disc, it will stop scanning.
The discs in the compact disc changer of
separate unit can be scanned up only.
Scanning the first tracks of all the discs
in the magazine:
Push and hold the “SCAN” button until
you hear a beep. “
SCAN” will appear
on the display and the player will scan up
or down the first track of the next disc.
To stop scanning, push this button again.
If the auto changer has scanned all the
discs, it will stop sc anning.
The discs in the compact disc changer of
separate unit can be scanned up only.

08 SIENNA_U (L/O 0801)
266
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
1. Volume control switch
Push “+” to increase the volume. The vol-
ume continues to increase while the
switch is being pushed.
Push “ −” to decrease the volume. The
volume continues to decrease while the
switch is being pushed.
2. “ ” switch
Radio
This switch has the following features—
To select a preset station:
Quickly push and release the “ ” or “ ”
side of the switch. Do this again to select
the next preset station.
To seek a station:
Push and hold the “ ” or “” side of the
switch until you hear a beep. Do this
again to find the next station. If you push
the switch on either side during the seek
mode, seeking will be cancelled.
To step up or down the frequency, push
and hold the switch even after you hear
a beep. When you release from the
switch, the radio will begin seeking up or
down for a station. Do this again to find
the next station. XM
 Satellite Radio∗—
To select a preset channel, push the “ ”
or “ ” side of the switch. Repeat until a
desired channel is found.
∗: Use of satellite radio requires XM 
tuner and service. Contact your Toyota
dealer for details.
Compact disc player
Use this switch to skip up or down to a
different track in either direction.
Quickly push and release the “ ” or “ ”
side of the switch until the track you want
to listen to is set. If you want to return
to the beginning of the current track, push
the “ ” side of the switch once, quickly.
Vehicles with rear seat entertainment sys-
tem—
While the DVD player is in operation, the
chapter or track can be changed by push-
ing the “ ” or “ ” side of the switch.
With compact disc changer only—
Push and hold the “ ” or “ ” side of the
switch until the disc you want to listen to
is set. MP3/WMA player
Use this switch to select a desired file or
disc.
To select a desired file:
Quickly push and release the “
” or “ ”
side of the switch until the file you want
to listen to is set. If you want to return
to the beginning of the current file, push
the “ ” side of the switch once, quickly.
To select a desired disc:
Push and hold the “ ” or “” side of the
switch until the disc you want to listen to
is set.
Vehicles with rear seat entertainment sys-
tem—
While the DVD player is in operation, the
chapter or track can be changed by push-
ing the “ ” or “ ” side of the switch.

08 SIENNA_U (L/O 0801)
321
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
1. Display
Displays such items as the reception lev-
el, a party’s name and phone number. See
“DISPLAY” described on the following
page for further details about the display.
2. “AUDIO CONTROL” knob
Turning the “AUDIO CONTROL” knob dis-
plays the menu items, names, numbers,
etc. to be selected. To select an item,
push the “AUDIO CONTROL” knob. Due to
safety concerns, the “AUDIO CONTROL”
knob does not function while the vehicle
is in motion.
3. Preset buttons
Pushing the preset button displays the
registered speed dial numbers.
4. “TEXT” button
When the party’s name or phone number
is too long to be displayed, pushing and
holding the “TEXT” button displays the re-
maining characters.

Audio unit

08 SIENNA_U (L/O 0801)
333
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
If “Confirm” is said, then input a voice
tag.
“Push the talk switch and say a name.”
is heard.1. Push the talk switch and say the name of the dial number that you want to
register.
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Stored. To register this as a speed dial
entry, push the talk switch and say set
speed dial. Otherwise, say confirm.” is
heard and “Stored” is displayed. 3. Select one of the following:
Confirm
Speed Dial Confirm
Push the talk switch and say “Confirm”, or
turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the knob.
“Returning to the phone book.” is heard.
Speed Dial
1. Push the talk switch and say “Set speed dial”, or turn the “AUDIO
CONTROL” knob until “Speed Dial” is
displayed and push the knob.
“Set speed dial. Push the preset button to
assign to XXXX” is heard. 2. Push and hold the desired preset but- ton.
“preset... is now assi gned. Returning to
the phone book.” is heard.
The system may not function in the follow-
ing cases:If the phone book is full.
If the dial number has more than 24
digits. (b) By Phone
1. Push the talk switch and say “By phone”, or turn the “AUDIO CONTROL”
knob until “By Phone” is displayed and
push the knob.
“Phone entry. Prepare to send the informa-
tion from the phone. When ready, push
the talk switch and say confirm.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Send the information at this time.” is
heard.
After the system has received the name
and phone number, “Push the talk switch
and say confirm. To select an alternate
number, say next or previous. Otherwise,
say go back.” is heard and “XXX (name)”
and “XXX (number)” is displayed. 3. Follow voice guidance instructions, push the talk switch and say “Confirm”,
or turn the “AUDIO CONTROL” knob
until the dial number that you want to
register is displayed and push the
knob.
Next, input a voice tag.
For further details, see page 332.

08 SIENNA_U (L/O 0801)
337
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
To delete speed dial1. Push the talk switch and say “Delete speed dial”, or turn the “AUDIO
CONTROL” knob until “Del Spd Dial” is
displayed and push the knob.
“Delete speed dial. Push the preset button
to delete from speed dial.” is heard. 2. Select the preset button that you want to delete.
“To delete preset... push the talk switch
and say confirm. Otherwise, say go back.”
is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Deleted.” is heard and “Deleted” is dis-
played.
“Returning to the phone book.” is heard.
The system may not function in the follow-
ing cases:
If no speed dial has been registered.
If the preset button has not been as-
signed. To change name
1. Push the talk switch and say “Change name”, or turn the “AUDIO CONTROL”
knob until “Change Name” is displayed
and push the knob.
“Change name. Push the talk switch and
say the name to change.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
the dial number that you want to
change is displayed and push the
knob. When using a voice command:
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXXX” is displayed.
1. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Push the talk switch and say a new
name.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Record Name” is displayed, push the
knob and say “XXX (new name)”.
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard.
3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Name changed. Returning to the phone
book.” is heard and “Changed” is dis-
played.

08 SIENNA_U (L/O 0801)
338
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
When using the knob:
“Push the talk switch and say a new
name.” is heard.1. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Record Name” is displayed, push the
knob and say “XXX (new name)”.
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Name changed. Returning to the phone
book.” is heard and “Changed” is dis-
played.
The system may not function in the follow-
ing cases:
If no name has been registered.
If the system does not recognize the
voice command. To set speed dial
1. Push the talk switch and say “Set Speed dial”, or turn the “AUDIO
CONTROL” knob until “Speed Dial” is
displayed and push the knob.
“Set speed dial. Push the talk switch and
say a name.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
the dial number that you want to regis-
ter is displayed and push the knob. When using a voice command:
“XXXX To register this as a speed dial
entry, push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXXX” is displayed.
1. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Push the preset button to assign to
XXXX” is heard.
2. Push and hold the desired preset but- ton.
“preset... is now assi gned. Returning to
the phone book.” is heard.
When using the knob:
“Push the preset button to assign to
XXXX” is heard.
Push and hold the desired preset button.
“preset... is now assi gned. Returning to
the phone book.” is heard.
The system may not function in the follow-
ing cases:
If no name has been registered.
If the system does not recognize the
voice command.

08 SIENNA_U (L/O 0801)
342
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
If the cellular phone is not registered, this
system cannot be used. See page 322 for
registering a cellular phone. Make sure
that “BT” is displayed and get the cellular
phone ready to use.
There are 3 ways to make a phone call
with this system.
Speed dial
A phone call can be made with a preset
button in which a phone number is regis-
tered. See page 338 for setting the preset
buttons.
Dial by Name
The system dials the numbers correspond-
ing to the spoken names registered in the
system.
Dial by Number
The system dials to the spoken numbers.
To make a phone call
Push the off −hook switch to turn the
hands −free system on. To speed dial
1. Push the preset button where the de- sired number is set. The name or tele-
phone number is displayed.
2. Push the off −hook switch to dial.
To dial by Name 1. Push the talk switch and say “Dial by name”.
“Dial by name. Please push the talk
switch and say the stored name, or say
list names.” is heard and “Dial by Name”
is displayed.
2. Push the talk switch and say “XXXX”, or turn the “AUDIO CONTROL” knob
until the phone name that you want to
dial is displayed and push the knob. When using a voice command:
“XXXX Push the off
−hook switch to dial.
Otherwise, push the talk switch and say
dial, or go back.” is heard. After that, do
the one of the following:
Push the off −hook switch.
Push the talk switch and say “Dial”.
Turn the “AUDIO CONTROL” knob until
“Dial” is displayed and push the knob.
When using the knob:
It calls the number.
The system may not function in the follow-
ing cases:
If there is no number registered in the
preset button.
If the system does not recognize the
voice command.
—Making a phone call