7
est) that have already been stored in the sys-
tem’s database. . . . . . . . . . . . . . . . . . . . . . . .
50
3“POI Category”
A destination can be selected from the POI
category. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
53
4“Previous”
A destination can be selected from any of the
last 100 previously set destinations and from
the previous starting point. . . . . . . . . . . . . . .
57
5“Memory”
The location can be selected from the regis-
tered “Memory points”. (To register memory
points, see “ — Registering memory points”
on page 89.) . . . . . . . . . . . . . . . . . . . . . . . . . .
57
6“Emergency”
One of the four categories of emergency ser-
vice points that are already stored in the sys-
tem’s database can be selected. . . . . . . . . .
56
7“Map”
A destination can be selected simply by
touching the location on the displayed map.
58 . . . . . .
8“Intersection”
The names of two intersecting streets can be
entered. This is helpful if only the general vi-
cinity, not the specific address, is known.
58 . . . . . .
9“Freeway Ent./Exit”
The name of a freeway (interstate) entrance
or exit can be entered. . . . . . . . . . . . . . . . . . .
59
10“?”
Function help for the “Destination” screen
can be viewed on this screen. . . . . . . . . . . .
26
11“Change”
To change the search area, touch this touch
screen button. . . . . . . . . . . . . . . . . . . . . . . . . .
42
12Quick access touch screen buttons
One of 5 preset destinations can be selected
by touching the screen directly. To use this
function, it is necessary to set the “Quick ac-
cess” for each memory point. (To register a
“Quick Access”, see “ — Editing memory
points” on page 90.) . . . . . . . . . . . . . . . . . . . . 45
