169
2−2. Instrument cluster
2
When driving
nSystem check display
After switching the “ENGINE START STOP” switch to IGNITION ON mode,
“LAND CRUISER” is displayed while system operation is checked. When the
system check is complete, the normal screen will return.
nTire inflation pressure
Tire inflation pressure changes with temperature. The displayed values may
also be different from the values measured using other gauges.
nLiquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem to continue
using the display.
NOTICE
nThe multi information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
185
2−4. Using other driving systems
2
When driving
Beeps and obstacle distance
A beep sounds when the corner sensors and back sensors are oper−
ating.
lThe beep sounds faster as the vehicle approaches an obstacle.
When the vehicle comes within the following distance of the obsta−
cle, the beep sounds continuously.
Front corner and back sensors: Approximately 1.1 ft. (35 cm)
Rear corner sensors: Approximately 1.0 ft. (30 cm)
lWhen two or more obstacles are detected simultaneously, the
beep system responds to the neare
st obstacle. If one or both come
within the above distances, the bee p will repeat a long tone, fol−
lowed by fast beeps.
l
You can change the volume of the warning beeps. ( P. 187)