Page 19 of 400
19
Instrument panel light
control dial
P. 125
CLUTCH START
CANCEL switch
P. 155
: If equipped
Outside rear view
mirror switches
P. 59
Tilt steering lock
release lever
P. 57
Page 22 of 400
22
For your information
Main Owners Manual
Please note that this manual applies to all models explains and all equip−
ment, including options. Therefore, you may find some explanations for
equipment not installed on your vehicle.
All specifications provided in this manual are current at the time of printing.
However, because of the Toyota policy of continual product improvement, we
reserve the right to make changes at any time without notice.
Depending on specifications, the vehicle shown in the illustrations may differ
from your vehicle in terms of equipment.
Accessories, spare parts and modification of your Toyota
A wide variety of non−genuine spare parts and accessories for Toyota
vehicles are currently available in the market. You should know that Toyota
does not warrant these products and is not responsible for their
performance, repair, or replacement, or for any damage they may cause to,
or adverse effect they may have on, your Toyota vehicle.
This vehicle should not be modified with non−genuine Toyota products.
Modification with non−genuine Toyota products could affect its performance,
safety or durability, and may even
violate governmental regulations. In
addition, damage or performance problems resulting from the modification
may not be covered under warranty.
Installation of a mobile two way radio system
As the installation of a mobile two−way radio system in your vehicle could
affect electronic systems such as the multiport fuel injection system/sequen−
tial multiport fuel injection system, cruise control system, anti−lock brake sys−
tem, SRS airbag system and seat belt pretensioner system, be sure to check
with your Toyota dealer for precautionary measures or special instructions
regarding installation.
Page 28 of 400
29
1−1. Key information
1
Before driving
NOTICE
To prevent key damage
Do not expose the keys to electromagnetic materials or attach any mate−
rial that blocks electromagnetic waves to the key surface.
Page 29 of 400
30
1−2. Opening, closing and locking the doors
Wireless remote control (if equipped)
2 step unlocking function
When you push the UNLOCK button, the driver ’s door is unlocked. Pushing
the button again within 3 seconds unlocks the other doors.
Operation signals
A buzzer sounds and the emergency flashers flash to indicate that the doors
have been locked/unlocked. (Locked: Once; Unlocked: Twice)
Panic mode
Door lock buzzer
If a door or glass hatch is not fully closed, a buzzer sounds for 10 seconds if
an attempt to lock the door and glass hatch are made. Fully close the door
and glass hatch to stop the buzzer, and lock the vehicle once more. The wireless remote control can be used to lock and unlock the vehi
cle from outside the vehicle.
Locks all doors
Unlocks all doors
Sounds alarm
(push and hold)
When PANIC button is pushed for longer
than about one second, an alarm will
sound for about 60 seconds and the vehi−
cle lights will flash to deter any person
from trying to break into or damage your
vehicle.
To stop the alarm, push any button on the
wireless remote control.
UN
LOCKLOCK
PA NIC
Page 30 of 400
31
1−2. Opening, closing and locking the doors
1
Before driving
Key battery depletion
The standard battery life is 1 to 2 years. (The battery becomes depleted
even if the key is not used.) If the wireless remote control function does not
operate, the battery may be depleted. Replace the battery when necessary.
(P. 301)
Security feature
If a door is not opened within approximately 60 seconds after the vehicle is
unlocked, the security feature automatically locks the vehicle again.
Conditions affecting operation
The wireless remote control function may not operate normally in the follow−
ing situations.
Near a TV tower, radio station, electr ic power plant, airport or other facil−
ity that generates strong radio waves
When carrying a portable radio, cell ular phone or other wireless commu−
nication device
Conditions affecting operation
When multiple wireless keys are in the vicinity
When the wireless key has come into contact with, or is covered by a
metallic object
When a wireless key (that emits radio waves) is being used nearby
When the wireless key has been left near an electrical appliance such as
a personal computer
Customization that can be configured at Toyota dealer
Settings (e.g. wireless remote control system) can be changed.
(Customizable features
P. 386)
Page 31 of 400
32 1−2. Opening, closing and locking the doors
Certification for wireless remote control
For vehicles sold in U.S.A.
NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interfer−
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTICE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. How−
ever, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
For vehicles sold in Canada
NOTE:
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, includ−
ing interference that may cause undesired operation of the device.
Page 32 of 400
33
1
1−2. Opening, closing and locking the doors
Before driving
Side doors
The vehicle can be locked/unlocke d using the wireless remote con
trol, key or door lock switch.
Wireless remote control (if equipped)
P. 3 0
Key
Locks all doors
Unlocks all doors
Turning the key a single
time in the driver ’s door
unlocks the driver’s door,
and turning the key again
unlocks the other doors.
Door lock switch
Driver ’s door lock switch
Locks all doors
Unlocks all doors
Page 33 of 400
34 1−2. Opening, closing and locking the doors
Locking the front doors from the outside without a key
Move the inside door lock button to the lock position.
Close the door.
The door cannot be locked if the dr
iver ’s door is open and the key is
in the engine switch.
Key reminder buzzer
A buzzer sounds if the driver ’s door is opened, while the engine switch is in
the ACC or LOCK position to remind you to remove the key.
Customization that can be configured at Toyota dealer
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features
P. 386)
Passenger ’s door lock switch
Locks all doors
Unlocks all doors
Inside door lock button
Locks the door
Unlocks the door
Pulling the inside handle can
open the front door even if the
inside door lock button is in the
lock position.
