Fuse replacement
10-7
Roadside emergencies
Fuse replacementReplacing a fuse
WARNING: Use replacement fuses of
the same rating and type or fuses of
matching specification. Incorrect fuse ratings
can overload a system and cause a fire or
malfunction. Blown fuses should be replaced
and no attempt should be made to repair a
blown fuse.
S
Fuses protect the vehicle’s electrical systems
from damage. The failure of any fuse will
render the equipment it protects inoperative.
1. Before removing a fuse, turn off all electrical equipment and remove the key
from the starter switch.
2. Locate the fuse box. The fuse box is located behind the access panel on the
passenger side of the dashboard.
3. Open the panel to access the fuses. Remove the panel by using the
screwdriver supplied in the toolkit to rotate the fastener 90° counterclockwise,
then release the panel from the
dashboard.
4. Consult the fuse specification chart to determine which fuse is protecting the
non-functioning electrical system.
Note: A label is also affixed to the inside
of the panel.
5. Remove the appropriate fuse and replace with a fuse of the same amperage as the
original. If in doubt, check the fuse
specification chart on the following
pages.
6. Re-install the fuse panel by aligning the hinges at the bottom of the panel with
the slots on the surrounding dashboard
area. Secure the panel by rotating the
fastener 90° clockwise.
If a replacement fuse fails to solve an
electrical failure, or the replacement fuse fails
prematurely, contact Tesla Motors.TR0048
13579 2468
11 13 15 17
20 22 24 26
10 12 14 16 18 19 21 23 25 27
Fuse colors
Fuse color
Rating (amps)
Orange 5
Brown 7.5
Red 10
Blue 15
Yellow 20
Clear 25
Green 30
Roadster OHB.book Page 7 Th ursday, October 2, 2008 8:59 AM
