2008 SUZUKI GRAND VITARA check oil

[x] Cancel search: check oil

Page 82 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 4-7INSTRUMENT PANEL
66J22-03E
systems (other than ABS) will turn on
automatically and the light will go out.
For details of the ESP
® systems, refer to
“Electronic Stability Program (ESP
®)” in

Page 161 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 6-2
OPERATING YOUR VEHICLE
66J22-03E
Daily Inspection ChecklistBefore Driving1) Make sure that windows, mirrors, lights
and reflectors are clean and unob-
structed.
2) Visually check the tires for the

Page 210 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-3INSPECTION AND MAINTENANCE
66J22-03E
Periodic Maintenance ScheduleR: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessaryInterval: This interval should be judged by odome

Page 211 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-4
INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessary
#1: Inspect at 250000 km (150000 miles) or 180 months.
NOTE:
The maintenance

Page 212 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-5INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessaryInterval: This interval should be judged by odometer
reading or months, whiche

Page 213 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-6
INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessary
NOTE:
This table shows the service schedule up to 250000 km (150000 miles).

Page 217 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-10
INSPECTION AND MAINTENANCE
66J22-03E
Oil Level CheckEngine oil dipstick
52D030
It is important to keep the engine oil at the
correct level for proper lubrication of your
vehicle’s engine. Check

Page 219 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-12
INSPECTION AND MAINTENANCE
66J22-03E
52D086
(1) Oil filter
(2) Oil filter wrench
(3) 3/4 turn
6) Tighten the filter 3/4 turn from the point
of contact with the mounting surface (or
to the specifi
Page:   1-8 9-16 17-24 next >