2008 SUZUKI GRAND VITARA automatic transmission fluid

[x] Cancel search: automatic transmission fluid

Page 1 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual Part No. 99011-66J22-03E
July, 2007
OWNER’S MANUAL
99011-66J22-03E GRAND VITARA
Printed in Japan
See page 1-1
12.5 mm
Keep With Vehicle At All Times.
Contains Important Information
On Safety, Operat

Page 4 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 66J22-03E
SERVICE STATION GUIDE1. Fuel (see section 1)
2. Engine hood (see section 5)
3. Tire changing tools (see section 5)
4. Engine oil dipstick <Yellow> 
(see section 9)
5. Automatic transmission

Page 161 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 6-2
OPERATING YOUR VEHICLE
66J22-03E
Daily Inspection ChecklistBefore Driving1) Make sure that windows, mirrors, lights
and reflectors are clean and unob-
structed.
2) Visually check the tires for the

Page 207 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual INSPECTION AND MAINTENANCE
9
66J22-03E
60G410
INSPECTION AND MAINTENANCEMaintenance Schedule  ....................................................... 9-2
Periodic Maintenance Schedule  ...............

Page 208 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-1INSPECTION AND MAINTENANCE
66J22-03E
60A187S
WARNING
You should take extreme care when
working on your vehicle to prevent
accidental injury. Here are a few pre-
cautions that you should be espe-
ci

Page 212 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-5INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessaryInterval: This interval should be judged by odometer
reading or months, whiche

Page 213 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-6
INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessary
NOTE:
This table shows the service schedule up to 250000 km (150000 miles).

Page 215 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-8
INSPECTION AND MAINTENANCE
66J22-03E
NOTE:
I – Inspect, clean, adjust, lubricate or replace as necessary
T – Tighten to the specified torque
R – Replace or change
L – Lubricate
*1 Inspect
Page:   1-8 9-16 next >