2008 SUZUKI GRAND VITARA transmission

[x] Cancel search: transmission

Page 204 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 8-9VEHICLE LOADING AND TOWING
66J22-03E
7) Release the parking brake.
Stop towing the vehicle every 300 km (200
miles). Start the engine. With the manual
transmission lever in 2nd gear (or the auto-
m

Page 205 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 8-10
VEHICLE LOADING AND TOWING
66J22-03E
4WD Vehicle Without a Transfer 
Switch
54G586
54G58564J234
You can not tow your vehicle behind
another vehicle using recreational towing
methods.
2WD Vehicle1

Page 207 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual INSPECTION AND MAINTENANCE
9
66J22-03E
60G410
INSPECTION AND MAINTENANCEMaintenance Schedule  ....................................................... 9-2
Periodic Maintenance Schedule  ...............

Page 208 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-1INSPECTION AND MAINTENANCE
66J22-03E
60A187S
WARNING
You should take extreme care when
working on your vehicle to prevent
accidental injury. Here are a few pre-
cautions that you should be espe-
ci

Page 212 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-5INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessaryInterval: This interval should be judged by odometer
reading or months, whiche

Page 213 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-6
INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessary
NOTE:
This table shows the service schedule up to 250000 km (150000 miles).

Page 214 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-7INSPECTION AND MAINTENANCE
66J22-03E
Maintenance Recommended under Severe Driving ConditionsIf the vehicle is usually used under the conditions corresponding to any severe condition code given belo

Page 215 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-8
INSPECTION AND MAINTENANCE
66J22-03E
NOTE:
I – Inspect, clean, adjust, lubricate or replace as necessary
T – Tighten to the specified torque
R – Replace or change
L – Lubricate
*1 Inspect