2008 SUZUKI GRAND VITARA maintenance

[x] Cancel search: maintenance

Page 208 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-1INSPECTION AND MAINTENANCE
66J22-03E
60A187S
WARNING
You should take extreme care when
working on your vehicle to prevent
accidental injury. Here are a few pre-
cautions that you should be espe-
ci

Page 209 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-2
INSPECTION AND MAINTENANCE
66J22-03E
NOTICE (for U.S.A.)
Maintenance, replacement or repair of
the emission control devices and sys-
tems may be performed by any automo-
bile repair establishment

Page 210 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-3INSPECTION AND MAINTENANCE
66J22-03E
Periodic Maintenance ScheduleR: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessaryInterval: This interval should be judged by odome

Page 211 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-4
INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessary
#1: Inspect at 250000 km (150000 miles) or 180 months.
NOTE:
The maintenance

Page 212 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-5INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessaryInterval: This interval should be judged by odometer
reading or months, whiche

Page 213 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-6
INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessary
NOTE:
This table shows the service schedule up to 250000 km (150000 miles).

Page 214 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-7INSPECTION AND MAINTENANCE
66J22-03E
Maintenance Recommended under Severe Driving ConditionsIf the vehicle is usually used under the conditions corresponding to any severe condition code given belo

Page 215 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-8
INSPECTION AND MAINTENANCE
66J22-03E
NOTE:
I – Inspect, clean, adjust, lubricate or replace as necessary
T – Tighten to the specified torque
R – Replace or change
L – Lubricate
*1 Inspect
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 49-56 ... 72 next >