Downloaded from www.Manualslib.com manuals search engine OPERATING YOUR VEHICLE
A WARNING
If
water gets into the brake drums,
brake performance may become poor
and unpredictable.
After driving through water or wash
ing the underside of the vehicle, test
the brakes while driving at a slow speed to see if they have maintained
their normal effectiveness. If the
brakes are less effective than normal, dry them by repeatedly applying the
brakes while driving slowly until the
brakes have regained their normal effectiveness.
Power Assisted Brakes Your vehicle has power assisted brakes. If power assistance is lost due to a stalled engine or other failures, the system is still
fully operational on reserve power and you can bring the vehicle to a complete stop by pressing the brake pedal once and holding it down. The reserve power is partly used
up when you depress the brake pedal and reduces each time the pedal is pressed. Apply smooth and even pressure to the pedal. Do not pump the pedal.
3-31
A WARNING
Even without reserve power in the
brake system, you can still stop the vehicle by pressing the brake pedal harder than normally required. However, the stopping distance may be longer.
Brake Assist System When you slam the brakes on, the brake
assist system judges as an emergency
stop and provides more powerful braking
for a driver who cannot hold down the
brake pedal firmly.
NOTE: If you quickly and forcefully depress the
brakes, you may hear a clicking sound in
the brake pedal. This is normal and indi
cates that the brake assist system is acti
vated properly.
Anti-Lock Brake System (ABS) ASS will help you avoid skidding by elec
tronically controlling braking pressure. It
will also help you maintain steering control when braking on slippery surfaces or when
braking hard.
The
ASS works automatically, so you do
not need any special braking technique.
Just push the brake pedal down without
pumping. The ASS will operate whenever it
senses that the wheels are locking up. You may feel the brake pedal pulsate while the ASS is operating.
NOTE: The ABS will not work if vehicle speed is under about 5 - 6 kmlh (3 - 4 mph).
A WARNING
•
On some types of loose surfaces
(such as gravel, snow-covered
roads, etc.) the stopping distance
required for
an ABS-equipped vehicle may be slightly greater than for
a comparable vehicle with a conventional brake system. With a conventional brake system, skid
ding tires are able to "plow" the gravel or snow layer, shortening
the stopping distance, ABS mini
mizes this resistance effect. Allow for extra stopping distance when driving on loose surfaces. • On regular paved roads, some driv
ers may be able to obtain slightly shorter stopping distances with
conventional brake systems than
with
ABS. • In both of the above conditions, ABS wi II still offer the advantage of helping you maintain directional control. However, remember that ABS will not compensate for bad road or weather conditions or poor
driver judgment. Use good judg
ment and do not drive faster than
conditions will
safely allow.
Downloaded from www.Manualslib.com manuals search engine (8) or ABS
(1) (2)
(CD)
BRAKE (3)
(1) ABS warning light Type 1 (2) ABS warning light Type 2 (3) Brake system warning light
A WARNING
65D451
If the ABS warning light «1) or (2» on
the instrument panel comes on and
stays on while driving, there may be a
problem with the ABS system. If this happens:
1) Pull off the road and stop care
fully.
2) Turn the ignition switch to "LOCK" and then start the engine again.
(Continued)
A WARNING
(Continued) If the warning light comes on briefly then turns off, the system is normal.
If the. warning light still stays on,
have the system inspected by your
SUZUKI dealer immediately.
If the ABS system becomes inoperative, the brake system will function as
an ordinary brake system that has no
ABS.
A WARNING
If the ABS warning light «1) or (2» and the Brake system warning light (3) on the instrument panel simulta
neously stays on or comes on when
driving, both anti-lock function and
rear brake force control function (proportioning valve function) of the ABS system may have failed. If so, the rear wheels may easily skid or the vehicle can even spin in the worst case when
braking on a slippery road or when
hard braking even on a dry paved
road. Ask your SUZUKI dealer to inspect the ABS system immediately. Drive carefully, avoiding hard braking
as much as possible.
OPERATING YOUR VEHICLE
How the ABS Works A computer continuously monitors wheel speed. The' computer compares the
changes in wheel speed when braking. If the wheels slow suddenly, indicating a
skidding Situation, the computer will change braking pressure several times
each second to prevent the wheels from locking. When you start your vehicle or when you accelerate after a hard stop, you may hear a momentary motor or clicking sound as the system resets or checks itself.
A WARNING
The ABS may not work properly if
tires or wheels other than those
specified in the owner's manual are
used. This is because the ABS works
by comparing changes in wheel speed. When replacing tires or wheels, use only the size and type
specified in this owner's manual.
3-32
Downloaded from www.Manualslib.com manuals search engine A WARNING
• The ESP® may not work properly if tires or wheels other than those specified in the Owner's Manual are
used. When replacing tires or wheels, use only the size and type
specified in this Owner's Manual. • The ESP® may not work properly if
tires are not inflated to the recommended tire inflation pressure. • The ESP® may not work properly if tires are fitted with tire chains. • The ESP® may not work properly if the tires are excessively worn. Be sure to replace tires when the tread
wear indicators in the grooves
appear
on the tread surface. • The ESP® is not a substitute for winter tires or tire chains on a snow covered road.
A WARNING
• The ESP® may not work properly if engine related parts such as 'the
muffler are not equivalent to standard equipment or are extremely
deteriorated.
• Do not modify the vehicle's suspension since the ESP® may not
operate correctly.
The ESP® indicator lights are described below:
SLIP Indicator Light
79K019
The SLIP indicator light in the instrument cluster blinks 5 times per second when one
of the following systems is activated. • Stability control system ' • Traction control system • Hill descent control system (if equipped)
CAUTION
If the SLIP indicator light comes on and stays on while driving, there may
be a malfunction of the ESP® systems (other than ABS). You should
have the systems inspected by an
authorized
SUZUKI dealer.
NOTE: When the SLIP indicator light comes on and stays on while driving, indicating a malfunction of the ES~ systems (other
than ABS), the brake system will function
as an ordinary ABS with no additional ES~ functions.
OPERATING YOUR VEHICLE
NOTE: When you disconnect and re-connect the
battery, ES~ system functions other than ABS will be deactivated and the slip indicator light will blink 1 time per second. In this
case, use the following procedure to reactivate the ES~ systems: 1) Drive your vehicle straight ahead without tire slippage at a speed greater than
approximately 15 kmlh (9 mph) for a few seconds
2) The slip indicator light will go out and
the ESf/8J systems (other than ABS) will
be re-activated
It may take more than few seconds before
the slip indicator light goes out depending
on the road. surface condition.
3-34