2008 SKODA OCTAVIA phone

Radio
4Audio settings– Press the button and then the station key and select the desired
parameter.
– Set the desired value by turning the rotary/push knob .You can select between the following parameters:•
BASS - bass setting;
•
MIDDLE - midtone setting;
•
TREBLE - treble setting;
•
BALANCE - setting of the volume ratio between the left and right side;
•
FA D E R - setting of the volume ratio between the front and the rear;
•
ON VOL
•
PDC VOL
•
GALA
•
LO U D - in case of low volume level, this function reinforces the range of bass
and treble frequencies;
ON VOL
Your radio stores the last volume set before switching off. If the value is higher, the
volume is reduced to the value of the parameter ON VOL after switching on the
radio again.
GALA
Your radio increases automatically its volu me with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.
PDC VOL*
If your vehicle is equipped with “parking aid”, the volume is automatically
decreased to a pre-defined value, wh en the “parking aid” is active.
Setting the special functions– Press the button longer.
– Select the individual functions of the menu with the help of the station
keys.
– Set the desired value using the rotary/push knob or with the help of the station keys.AUX*
Switching on or off the function s of the external audio source.
Setting of the input sensitivity AUX LEV :•
AUX LEV 1 - high level, used in particular for notebooks;
•
AUX LEV 2 - middle level, used for cassettes or CD player;
•
AUX LEV 3 - low level, used for MP3 player;
PHONE*
If your vehicle is equipped with a ha ndsfree system, you can switch on or off the
monophone play function of the mobile phone calls via the loudspeakers of the
vehicle.
BEEP
Switching on or off the tone signal when storing the radio stations.
ILLUM
Switch on (value 2) or switch off (value 1) the rear lighting of the control buttons for
the radio.
AF
The function alternative frequency (AF) ensures that the best receivable frequency
of the selected station is automatically and precisely set. The replay of the broad-
cast can be muted briefly during the search process according to the best receiv-
able frequency. If no alternative frequenc y of the set station can be found and the
station no longer offers a satisfactory quality, then please select another station.

A12
A2
MENU
A2
A2
s334.7.book Page 4 Tuesday, August 12, 2008 9:23 AM

Radio5
REG
Certain programs of the broadcasting companies are divided into regional
programs at specific times. That is why in individual regions the regional programs
of a station can broadcast different contents.
First of all the unit attempts to set only alternative frequencies of the selected
station.
If the quality is however so low, that there is a risk of a “program loss”, the unit also
accepts “related” frequencies.•
FIX - the receiver switches to a regional “related” station, if the reception of the
current station could be interrupted;
•
AUTO - the receiver can access the re gional “related” station unlimited.
BT-AUDIO*
Enables a wireless transfer of MP3 data to the telephone preinstallation.
Radio modeWaveband switch-over– Press the button for a long period of time.Your radio is equipped with FM and AM wavebands. They are divided in 6 memory
levels, i.e. 3 levels for the FM waveband and 3 levels for the AM waveband. There
are each 6 memory spaces available on these levels.
Activation of the FM waveband
The FM waveband is activated when pressing the station key FM. By briefly
pressing the button , you can select between the memory levels FM1, FM2
and FM-AS.
Activation of the AM waveband
The AM waveband is activated wh en pressing the station key AM. By briefly
pressing the button , you can select between the memory levels FM1, FM2
and FM-AS.
The process of searching for and storing the radio stationsManual search
– Set the frequency of the desired radio station by pressing the button or or by turning the rotary/push knob .
Store station
– After selecting the radio station, hold the station key , on which it should be stored until it briefly switches to mute and a brief signal
sounds.
Automatic station finding with storing the radio stations
– Press the button . An automatic station finding is started during which the 6 stations with the strongest signal in the memory level FM2
and/or AM2 are stored. This applies only to the wavebands FM2 and
AM2.When storing the radio stations on the station keys is finished, you can call up
the desired radio station by pressing a station key .
Note
The stored radio stations of the curren t waveband are updated and stored once
again by repetitively pressing the button .Radio textCertain radio stations tran smit additional text information - designated as
radio text.
– The information of the radio text is displayed by pressing the button .
RADIO
A12
RADIO
A12
RADIO


A2
A12
AS
A12A12
AS
INFO
s334.7.book Page 5 Tuesday, August 12, 2008 9:23 AM

CD player7
CD playerUsing the systemInserting the CD– Press the button , in order to select the audio source: CD
(internal CD drive), CDC (external CD changer), AUX (external input)
and BT-AUDIO (wireless transfer of MP3 data to the telephone prein-
stallation).
– Carefully insert a CD into the CD case until it is automatically drawn in. The play function begins automatically.Operating the CD playerSelect track
– Briefly press the rocker switch or during the play function of
the CD or turn the rotary/push knob , in order to select the previous
and/or the next title.
– Press the button or longer for fast replay of the track (reverse
or forward). The play function is continued after releasing the button.
Function SCAN
– Briefly press the control button , in order to scroll through the CD. The first 10 seconds of each title are played.
– In order to call up the original replayed title, press the station key CANCEL.
– End the automatic finding by pressing the button OK. The already
replayed title remains selected.
– If you wish to select another title, press the button SKIP. End the play function of the CD
– In order to end the play function
of the CD, press the desired station
key.
Ejecting CD
– Press the button , the Cd is ejected.
Note
•
If the ejected CD is not removed, it is drawn in again for safety reasons.
•
If the radio is functioning in the TP mode before changing to the CD mode, the
play function of the CD is interrupted duri ng the traffic reports and the unit switches
over to the radio mode. After the traffic reports have ended, the unit switches back
once again to the CD mode.
Play function of MP3 dataDisplay of additional information
– Press the button , the additional information for the current title is displayed on the display.
– You can select the additional information with the station buttons , which is displayed on the display.Selective functions in CD modeDuring the CD play function the followin g functions are displayed on the display:
RPT
Selection of the mode for repeating the title.•
OFF - Play function in continuous order;
MEDIA
A10

A2


A2
A12
A12A12
A11INFO
A12
s334.7.book Page 7 Tuesday, August 12, 2008 9:23 AM