Fuses and light bulbs265
Using the systemSafetyDriving TipsGeneral MaintenanceBreakdown assistanceTechnical Data
– Insert the socket with the changed light bulb into the headlight and
secure it by turning in the direction of arrow CLOSE (close) to the
right.
Note
We recommend that you have the headlight setting checked by a specialist garage
after installing the headlight.
Front parking lights and low beam
Removing the light bulb for the parking light
– Switch the ignition and all lights off.
– Remove the headlight ⇒page 264.
– Remove the protective cap ⇒page 263, fig. 240 .
– Remove the socket ⇒fig. 243 .
– Take the faulty bulb out of the fixture and insert a new one.
– Insert the protective cap. Removing the light bulb for the low beam light
– Switch the ignition and all lights off.
– Remove the headlight ⇒
page 264.
– Remove the protective cap ⇒page 263, fig. 240 .
– Turn the connector with the light bulb up to the stop towards the left and remove ⇒fig. 243.
– Replace the lamp, insert the connector with the new lamp and turn to the right up to the stop.
– Insert the protective cap.
Note
•In order to facilitate the removal of th e bulb for the parking lights, we recom-
mend to remove first of all the bulb for the low beam light.
•We recommend that you have the headli ght setting checked by a specialist
garage after installing the headlight.
Main beam light
– Switch the ignition and all lights off.
Fig. 243 Removing the bulbs
for the parking and low beam
light
AB
AA
AB
AB
Fig. 244 Removing the light
bulb for the main beam light
20A5Facelift.book Page 265 Saturday, September 6, 2008 2:13 PM
