Radio2
Radio
Radio - Overview
Rotary/push knob
− switching on and off (pressing)
− Volume control (rotate)
− other function settings in various menus
Button
− Activation of CD mode (CD-DA/CD-R/CD-RW/MP3, multisession)
− Direct selection of the CD via station keys
− Activation of the mode for external audio source
Button to activate the FM radio mode
Button to store the six stations with the strongest reception in the respec- tive waveband
Button
− fast search in the respective waveband
− Scroll through the contents of the CD
Buttons
− manual station finding in radio mode
− Selecting title in CD mode
Buttons
− fast station finding in radio mode
− Pre-winding the title in the CD mode
Button for adjusting the sound and volume distribution
Button to activate the AM radio mode
Button
− Display of radio text information
− Display of additional information of MP3-CDs
Button to call up the menu settings of the parameter for radio or CD player
Station keys
− store and select the RDS station
− CD selection
− Selecting the parameter for user settings
CD - eject button
CD-case
Display - screen
Button for activating the traffic information mode
Important information
Warranty
The same warranty terms apply for the equipment as for new vehicles.
After the expiration of the warranty, a unit in need of repair will be replaced inex- pensively with a reconditioned, original unit with spare part warranty. However it is required that there is no housing dama ge and no unauthorised repair attempts have been made.
Note
A damage in the sense of the warranty must not be the result from improper handling of the system or from unprofes sional repair attempts. In addition, no external damage must be present.
Radio mode
The radio should only be used, if the traffic situation permits it.
The volume settings must be selected in su ch a way that acoustic signals from the outside, such as e.g. a Martins horn from utility vehicles (police cars, ambulances and fire brigade), can be heard at any time.
A1
A2CD
A12
A3FM
A4AS
A5SCAN
A6
A7
A8
A9AM
A10INFO
A11MENU
A12
A13
A14
A15
A16TP
s1uk.3.book Page 2 Wednesday, May 2, 2007 11:07 AM
Radio3
WARNING
Please always pay full attention to the traffic situation around you! As the driver you are fully responsible for the traffic safety. Only use the functions in such a way that you always maintain the control over your vehicle in all traffic situations!
Using the display
Carefully handle the display because dent s and scratches can occur through pres- sure of the finger or contact with sharp objects.
The display can be cleaned with a soft cl oth and finger marks can be wiped away with pure alcohol.
Note
Do not use solvent such as turpentine or petrol as they will corrode the display surface.
Anti-theft protection
Anti-theft coding
Your radio is equipped with a convenience co ding. If the radio is being operated for the first time, the safety code is not only stored in the radio but also in the vehicle.
After disconnecting and reconnecting the batte ry, first of all switch on the ignition and then the radio.
If you wish to install the radio in another vehicle, the safety code must be entered. In this case, please do not hesitate to contact a Škoda Service Partner or a Škoda importer.
As the unit only functions after entering the safety code, this practically excludes its use after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cl uster. Through this it is automatically decoded (convenience coding). A manual entry of the code is normally not necessary.
Code entry
– Switch on the radio if the ignition is on. SAFE is displayed and then
0000 .
– Enter the safety code using the station keys .
– Confirm the safety code by pressing the button .
If you have confirmed a wrongly entered co de, you can repeat once again the entire process.
If the code number is entered incorrectl y for the second time, the unit will be blocked for approx. one hour. It is only po ssible to repeat the entry of the safety code after an hour has expired and while the unit is switched on and the ignition key remains in the ignition lock.
The cycle - two attempts, blocked for an hour - furthermore applies.
Basic setting
Switching the unit on and off
– The system is switched on or off by pressing the rotary/push knob .
If the key is pulled out of the ignition lock when the system is switched on, the system switches off automatically. You can switch on again the unit by pressing the rotary/push knob . If the engine is switch ed off, the unit (protection of the vehicle battery before discharging) switches of f automatically after approx. one hour.
A12
A1
A1
s1uk.3.book Page 3 Wednesday, May 2, 2007 11:07 AM
