2008 Seat Toledo phone

Communication
12
Control commands
The control commands are used to carry out functions that have already been selected.
The control commands are used during or at the end of a dialogue to carry out
certain functions.
Possible commands
Dial number
A telephone number can be vocally specified to the system and then dialled.
– Press button to talk Ÿ page 6, fig. 1. Activation of the system
is confirmed by a tone.
– After the tone, say the command DIAL NUMBER.After this command the system will then request you to specify a telephone
number. A connection will then be established to the specified number. The
telephone number can be specified all at once, in blocks of digits (separated
by a brief pause), or as single digits. You can specify the digits from zero to
nine . After each block of digits you specify (separated by a brief pause) the
CommandEffect
DIALTelephone number already entered is dialled.
STOREA name is saved in the phonebook with its phone number
CANCELCancels a running dialogue.
REPEATThe specified name or all of the digits specified up to this point will be
repeated. The system will then give the cue so that you can
specify additional digits or commands.
CORRECTIONThe specified name or the last entered block of digits will be deleted. The sys-
tem will then give the cue so that you can specify additional
digits or commands.
DELETEAll specified digits will be deleted. The system will then give the cue number has been deleted. Please, proceed> so that you can specify new digits
or commands.
AF

Communication13
Controls and equipmentsystem will repeat the digits. The system can only recognise single digits
(one, zero, two, five, etc.), and not combinations of digits (e.g. ten, twenty-
five).
Notes on specifying telephone numbers:
•If the telephone number has more than 20 digits, the system will decline
and give the cue .
•A Plus (+) can also be placed ahead of the 20 digits.
Example of how to enter a telephone number:
A running dialogue can be cancelled at any time by pressing button to
talk.
CommandConditionMessageEffect
DIAL NUMBERPhone switched onDialogue
for example, ZERO, SEVEN, THREE,
ONEDialogue
If no command is specified, the system responds after about 5 seconds with the next cue.
No command back, or specify additional digits>Dialogue
THREE, NINE, TWODialogue
DIALDialogue -The telephone number
0731492 will be dialled
End of dialogue
AF

Communication
14
Redial
– Press button to talk Ÿpage 6, fig. 1 .
– After the tone, say the command REDIAL.After giving the command the last number dialled via the hands-free system
will be dialled again.
Example of the REDIAL command:
A running dialogue can be cancelled at any time by pressing button to
talk.
To store names in the phone book
You can store names and telephone numbers in the internal phone book.
– Press button to talk Ÿ page 6, fig. 1. The beep tone indicates
that the system is ready.
– After the tone, say the command STORE NUMBER.
After giving the command the system will request you to specify a name and
telephone number to store in the internal phone book. The telephone book can store 50 names and numbers. You can specify the digits from zero
to
nine .
The telephone number can be specified all at once, in blocks of digits (sepa-
rated by a brief pause), or as single digits. After each block of digits you
specify (separated by a brief pause) the system will repeat the digits. The
system can only recognise single digits (one, zero, two, five, etc.), and not
combinations of digits (e.g. ten, twenty-five).
Say STORE to store the entry in the phone book.
AF
CommandConditionMessageEffect
REDIALPhone switched onDialogue
End of dialogue
AF
AF
CommandConditionMessageEffect
STORE NAMEPhone book is not fullDialogue
COMPANY XYZDialogue

Communication15
Controls and equipmentA running dialogue can be cancelled at any time by pressing button to
talk.
Note
•If the telephone number has more than 20 digits, the system will decline
and give the cue .
•A Plus (+) can also be placed ahead of the 20 digits.
•Say the command delete or back to delete or correct the corresponding
block of digits.
•Say repeat to have all the digits that have been recognised up to that
point repeated.
•If two or more names sound alike, it is better to save the names including
the first name or some other distinguishing entry.
•A running dialogue can be cancelled at any time by pressing button to
talk.
•The phone book works only in conjunction with the hands-free voice
command system; the entries are not stored on the phone SIM card.
COMPANY XYZDialogue
ZERO, ONE, TWO, THREEDialogue
FOUR, FIVE, SIXDialogue
If no command is specified, the system responds after about 5 seconds with the next cue.
No command repeat, back, delete, or specify addi-
tional digits>Dialogue
STOREDialogue - The name COMPANY XYZ
with the telephone number 0123456
has been stored
End of dialogue
AF
AF

Communication
16
Calling a name in the phone book
– Press button to talk Ÿpage 6, fig. 1 .
– After the tone, say the command SELECT NAMEAfter the system has recognised this command, you may select a stored entry
from the telephone book to call the required number. The system best recog-
nises names spoken by the person who stored the name.
Example of how to select a name from the internal phone book
A running dialogue can be cancelled at any time by pressing button to
talk.AF
CommandConditionMessageEffect
SELECT NAMEPhone is switched on, telephone book
contains entries.Dialogue
COMPANY XYZDialogue
If no command is specified, the system responds after about 5 seconds with the next cue.
No command repeat, back>Dialogue
DIALDialogue - The telephone number for
Company XYZ is being dialled
End of dialogue
AF

Communication17
Controls and equipment
Listening to the phone book
You can have the entries stored in the internal telephone book read out to you.
– Press button to talk Ÿpage 6, fig. 1. The beep tone indicates
that the system is ready.
– Say the command PLAY PHONE BOOK.After giving the command the system will read out the entries stored in the
phone book. Press the talk button as an entry is being read to select the
telephone number for that entry. Once the dialogue is complete and the
system is reactivated, you can also select an entry to call by specifying the
stored name.
Example of the PLAY PHONE BOOK command:
Example of how to select an entry:
To delete names from the phone book
You can delete entries from the internal phone book.
– Press the talk button Ÿpage 6, fig. 1 . The beep tone indi-
cates that the system is ready.
– After the tone, say the command DELETE NAME .After giving this command you can delete a stored entry from the internal tele-
phone book.
AFAF
CommandConditionMessageEffect
PLAY PHONE BOOKThe telephone book contains entries. Dialogue - The telephone book will
then be read out.
End of dialogue
CommandConditionMessageEffect
PLAY PHONE BOOKThe telephone book contains entries;
Press the talk button on hearing
the entry required.Dialogue - The selected name will be
repeated. The telephone number will
be dialled.
End of dialogue
AF
AF

Communication
18
Example of how to delete an entry from the phone book:
A running dialogue can be cancelled at any time by pressing button to
talk.
Note
•Say the command Repeat, if you would like to have the specified name
repeated by the system.
•If you then say No, the system will answer with and the dialogue
will be ended.
To delete the phone book
You can delete the entire phone book or single entries.
– Press the talk button Ÿpage 6, fig. 1 .
– After the tone, say the command DELETE PHONE BOOK.
After giving this command you can delete the entire internal phone book or
single entries as desired.
CommandConditionMessageEffect
DELETE NAMEThe telephone book contains entries.Dialogue
COMPANY XYZ pany XYZ?>Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.Dialogue
No command repeat, back>Dialogue
Ye sDialogue
End of dialogue
AF
AF

Communication19
Controls and equipmentExample of how to delete the entire internal telephone book:
Example of how to delete one entry from the internal phone book:
CommandConditionMessageEffect
DELETE PHONE BOOKThe telephone book contains entries. phone book?>Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.Dialogue
No commandDialogue
Ye sDialogue
If no command is specified, the system responds after about 5 seconds with the next cue.Dialogue
No commandDialogue
Ye sDialogue - All entries in the phone
book will be deleted.
End of dialogue
CommandConditionMessageEffect
DELETE PHONE BOOKThe telephone book contains entries. phone book?>Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.Dialogue
No command repeat>Dialogue
NODialogue - The telephone book will
then be read out.
No commandPress talk button on hearing the
entry to be deleted. (name)?>Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.Dialogue