ENGINE COMPARTMENT CONNECTION UNIT
Fault finding - Customer complaints87G
87G-89V7 MR-372-J84-87G050$825.mif
UPC
Vdiag No.: 48, 4CENGINE COMPARTMENT CONNECTION UNIT
Fault finding - Customer complaints
NOTESRun complete fault finding on the multiplex network (see 88B, Multiplex).
Run fault finding on the Protection and Switching Unit.
RECORDED FAULTS
NO DIALOGUE WITH THE COMPUTER ALP1
NO BACKLIGHTING OF THE VARIOUS FUNCTIONS IN THE PASSENGER
COMPARTMENTALP3
MR-372-J84-87G050$825.mif
ENGINE COMPARTMENT CONNECTION UNIT
Fault finding - Fault finding charts87G
87G-91V7 MR-372-J84-87G050$880.mif
UPC
Vdiag No.: 48, 4C
ALP3No backlighting of the various functions in the passenger
compartment
NOTESMake sure that the side lights are working; if not, refer to the procedure for command
AC003 Side lights.
Use Wiring Diagrams Technical Note for Mégane II or Scénic II.
Check the condition and connection of the defective functions.
If the connector is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the connector, otherwise replace the connector.
Check for earth on the defective function(s).
If the connection is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the wiring, otherwise replace it.
With the side lights on, check for 12 V on the defective function(s).
If correct, replace the defective component.
If the connection is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the wiring, otherwise replace it.
Check the insulation, continuity, and the absence of interference resistance between the defective function
and the Protection and Switching Unit:
Right-hand headlight component code 226, rear right-hand
lights component code 172, right-hand and left-hand heated
seat control component codes 1513 and 1514, parking distance
control switch component code 1540, cruise control/speed
limiter control component code 1081, ESP on/off button
component code 1106, gear lever display component code
1129, hard roof switch component code 1482, simultaneous
window control component code 854, LPG or petrol selector
switch component code 1003, right-hand number plate light
component code 166.LPDConnector CN of the
Protection and Switching
Unit, component code
1337.
Left-hand rear light component code 173, left-hand headlight
component code 227, child safety switch component code 135,
CD changer component code 1272, radio component code
261, multifunction display component code 653, headlight
adjustment rheostat switch component code 1390, warning/door
locking switch component code 1391, first cigarette lighter
component code 101.LPGConnector CN of the
Protection and Switching
Unit, component code
1337.
If the connections are faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the wiring, otherwise replace it.
If the fault is still present, contact the Techline.
AFTER REPAIRCheck that no fault is present.
USM_V48_ALP3 /USM_V4C_ALP3
ENGINE COMPARTMENT CONNECTION UNIT
Fault finding - Tests87G
87G-94V7 MR-372-J84-87G050$935.mif
UPC
Vdiag No.: 48, 4C
TEST1
CONTINUED
With the engine running, main beam
headlights and heated rear screen on,
measure the voltage between the B+
battery feed and B+ alternator feed
Check the condition of all the wires connecting the
battery, alternator and starter and that all of their
terminals are correctly tightened. Is the voltage > 0.7 V?
Repair any damaged wires and terminals. If the
connection is faulty and if there is a repair
procedure (see Technical Note 6015A Electrical
wiring repair, Wiring: Precautions for repair),
repair the wiring, otherwise replace the wiring
With the engine running, main beam
headlights and heated rear screen on,
measure the voltage between the B- battery
feed and the alternator frame.Check the earths for the engine, the alternator, the
chassis, the gearbox, the battery or the starter
(check for tightness, check the condition of the
terminals and the condition of the wires) (see
Technical Note for the relevant vehicle). Is the voltage > 0.7 V?
Repair any damaged wires and terminals. If the
connection is faulty and if there is a repair
procedure (see Technical Note 6015A Electrical
wiring repair, Wiring: Precautions for repair),
repair the wiring, otherwise replace the wiring The electrical circuit is in good order.
A
YES
YES
NO
YES
NO
AFTER REPAIRCarry out a complete check with the diagnostic tool.
