2008 RENAULT SCENIC fuel reserve

83A-14
MR-372-J84-83A000$378.mif
V8
83A
INSTRUMENT PANEL
Fault finding - Interpretation of faults
TDB_V08_DF007/ TDB_V0C_DF007
DF007
PRESENT
OR
STOREDFUEL SENDER CIRCUIT
CO: Open circuit
CC: Short circuit
NOTESConditions for applying the fault finding procedure to stored faults:
The fault is declared present after 60 seconds, with the ignition on.
Special notes:
Check the consistency between the instrument panel display and parameter PR035
Fuel level.
CO
NOTESSpecial note:
The fault is declared present if the fuel sender resistance is
greater than 350 Ω.
Manipulate the wiring harness between the instrument panel and the fuel sender in order to produce a change in
fault status (Present → Stored).
Look for possible damage to the harness, and check the connection and condition of the fuel sender and its
connections.
If there is a repair method (see Technical note 6015A, Repairing electrical wiring, Wiring: Precautions for
repair) repair the wiring, otherwise replace it.
Check the continuity of the following connections:
Fuel sender track 2 track 15, Grey instrument panel connector
Fuel sender track 4 track 2, Grey instrument panel connector
If there is a repair method (see Technical note 6015A, Repairing electrical wiring, Wiring: Precautions for
repair) repair the wiring, otherwise replace it.
Measure the resistance between tracks 4 and 2 of the fuel sender.
Replace the fuel sender if the resistance value is not: 290 Ω fuel tank in reserve
54 Ω fuel tank full
If the fault is still present, contact the Techline.
AFTER REPAIRDeal with any faults declared by the diagnostic tool.
Clear the computer memory.
Carry out a road test followed by another check with the diagnostic tool.
TDB ph2 (EG/MG)
Prog version: 04xx
Vdiag No.: 08, 0C
MR-372-J84-83A000$378.mif

83A-15
MR-372-J84-83A000$378.mif
V8
INSTRUMENT PANEL
Fault finding - Interpretation of faults83A
TDB ph2 (EG/MG)
Prog version: 04xx
Vdiag No.: 08, 0C
DF007
CONTINUED
CC
NOTESThe fault is declared present if the fuel sender resistance is
less than 5 Ω.
Manipulate the wiring harness between the instrument panel and the fuel sender in order to produce a change in
fault status (Present → Stored).
Look for possible damage to the harness, and check the connection and condition of the fuel sender and its
connections.
If there is a repair method (see Technical Note 6015A, Repairing electrical wiring, Wiring: Precautions for
repair), repair the wiring, otherwise replace it.
Disconnect the fuel sender connector and check for a change in fault status.
If the fault remains in short circuit, check the insulation and continuity of the following connections, with the
connector disconnected:
Fuel sender connector track 2 track 15, Grey instrument panel connector
Fuel sender connector track 4 track 2, Grey instrument panel connector
If there is a repair method (see Technical note 6015A, Repairing electrical wiring, Wiring: Precautions for
repair) repair the wiring, otherwise replace it.
If the fault becomes an open circuit fault, move to the next step of the fault finding.
Measure the resistance between tracks 4 and 2 of the fuel sender.
Replace the fuel sender if the resistance value is not: 290 Ω fuel tank in reserve
54 Ω fuel tank full
If the fault is still present, contact the Techline.
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the computer memory.
Carry out a road test followed by another check with the diagnostic tool.

83A-22
MR-372-J84-83A000$441.mif
V8
INSTRUMENT PANEL
Fault finding - Conformity check83A
TDB ph2 (EG/MG)
Prog version: 04xx
Vdiag No.: 08, 0C
GAUGES
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool.
The values shown in this conformity check are given as a guide.
Application conditions: Ignition on, engine off.
Order FunctionParameter, Status
Check or ActionDisplay and notes Fault finding
1
FuelPR115:LPG fuel levelIndicates the fuel level in the
tank.
PR115 = 0 l if vehicle not
equippedIn the event of a fault,
consult the interpretation
of parameter PR115 LPG
fuel level.
2PR002:Fuel sender
resistance In reserve: 290 ΩΩ Ω Ω
Full: 54 ΩΩ Ω ΩIn the event of a fault,
consult the interpretation
of fault DF007 Fuel
sender circuit. 3PR035:Fuel levelIndicates the fuel level in the
tank.