{CAUTION:
In ating something too much can make it
explode, and you or others could be injured.
Be sure to read the in ator instructions, and
in ate the tire to its recommended pressure.
Do not exceed 36 psi (248 kPa).
7. Move the sealant and compressor kit switch to
the I (on) position.
8. In ate the tire up to the recommended in ation
pressure using the air pressure gage on the top
of the unit. The pressure gage reads high while the
compressor is running. Turn the compressor off
to get an accurate reading. SeeInflation - Tire
Pressure on page 5-58for more information.
9. Turn off the air compressor by moving the switch to
the O (off) position.
{CAUTION:
Storing the tire sealant and compressor
kit or other equipment in the passenger
compartment of the vehicle could cause injury.
In a sudden stop or collision, loose equipment
could strike someone. Store the tire sealant
and compressor kit in the proper place.
10. Disconnect the compressor in ator hose and
wrap the hose in the bottom of the sealant and
compressor kit.
11. Place the equipment in the original location in the
trunk of your vehicle.
5-83
